Abstract:Recently, sodium ion batteries (NIBs) gained increasing attention, because of its abundant reserves and relatively even geological distribution. However, the development of NIBs is greatly hampered because of the lack of appropriate active materials for both cathodes and anodes. Since the Na ion is ca. 55% larger than the Li ion, finding suitable host materials with sufficiently large interstitial space to accommodate sodium ions and to allow reversible and rapid ion insertion and extraction is very difficult. NASICON-type Na3V2(PO4)3 has recently been considered as a prospective cathode material for NIBs, because of its highly covalent 3D framework crystalline structure, high energy density (~400 Wh/kg) and good thermal stability. For anode materials, disordered carbon is particularly attractive because of their large interlayer distance and disordered structure that could accommodate sodium ions. Here, we briefly present porous carbon based electrodes for NIBs with excellent rate performance: (1) Carbon-coated nanosized Na3V2(PO4)3 embedded in the porous carbon matrix (abbreviated as CC-NVP@PCM); (2) Nitrogen-doped activated porous carbon fibers (ACFs); (3)Flexible free-standing porous carbon nanofibers (P-CNFs) with three-dimensional (3D) interconnected structure. The CC-NVP@PCM was prepared by using a facile soft-chemistry based method with post heat-treatment. It shows high rate performance (44 mAhg-1at 200C ). This ultrahigh rate performance is comparable to that of supercapacitor, but with much higher energy density. The ACFs were synthesized by pyrolysis of Ppy nanofiber precursor. It shows excellent capacity retention and extraordinary rate performance. The reversible capacity at 0.05 Ag-1 is 296 mAhg-1 and could still maintain as 72 mAg-1 at a current of 10 Ag-1. In case of the P-CNFs electrode prepared by electrospinning, it delivers a reversible capacity of 266 mAh.g-1 after 100 cycles at 0.2C, corresponding to 80.3 % of the initial charge capacity. When cycled at a current density as high as 500 mAg-1 (2C), it still delivers a reversible capacity of ~140 mAh.g-1after 1000 cycles. The improvement of electrochemical performance of these porous carbon based electrodes for NIBs is attributed to the special design and porous structure, which confined a variety of advantages: hierarchical porous channels enabling short transport length for ions and electrons, carbon coated structure resulting in low resistances, good mechanical properties leading to the excellent morphology stability.

Ionogel-based sodium ion micro-batteries with a 3D Na-ion diffusion mechanism enable ultrahigh rate capability

Towards Polyvalent Ion Batteries: A Zinc-Ion Battery Based on NASICON Structured Na3V2(PO4)3

All‐Solid‐State Planar Sodium‐Ion Microcapacitors with Multidirectional Fast Ion Diffusion Pathways

3D Printing Flexible Sodium Ion Micro‐batteries with Ultrahigh Areal Capacity and Robust Rate Capability

Electrodes for Sodium-Ion Batteries with Excellent Rate Performance Using Porous Carbon Networks

High-voltage Aqueous Planar Symmetric Sodium Ion Micro-Batteries with Superior Performance at Low-Temperature of −40 ºc

Structure engineering and heteroatom doping-enabled high-energy and fast-charging dual-ion batteries

On-Chip 3D Zn/NiOOH Helical Electrodes for High-Energy-Density Microbattery

High-voltage aqueous planar symmetric sodium ion micro-batteries with superior performance at low-temperature of −40 oC

Sodium Ion Microscale Electrochemical Energy Storage Device: Present Status and Future Perspective

High-power Lithium-Ion Microbatteries from Imprinted 3D Electrodes of Sub-10 Nm LiMn2O4/Li4Ti5O12 Nanocrystals and a Copolymer Gel Electrolyte

Design Nitrogen (N) and Sulfur (S) Co-Doped 3D Graphene Network Architectures for High-Performance Sodium Storage.

Advanced Na-Ion Batteries Based on Porous Nanocarbon Composites and Hybrids

Tuning Rate-Limiting Factors to Achieve Ultrahigh-Rate Solid-State Sodium-Ion Batteries

Highly Reversible Na Storage in Na3V2(PO4)3 by Optimizing Nanostructure and Rational Surface Engineering

Array of Nanosheets Render Ultrafast and High-Capacity Na-ion Storage by Tunable Pseudocapacitance

Alkaline Ni-Zn Microbattery Based on 3D Hierarchical Porous Ni Microcathode with High-Rate Performance

Pseudocapacitive Zinc Cation Intercalation with Superior Kinetics Enabled by Atomically Thin V2O5 Nanobelts for Quasi-Solid-State Microbatteries

An Ultrahigh‐Power Mesocarbon Microbeads|Na + ‐Diglyme|Na 3 V 2 (PO 4 ) 3 Sodium‐Ion Battery

Design of Three-Dimensional Metallic Biphenylene Networks for Na-Ion Battery Anodes with a Record High Capacity

Flexible Quasi‐Solid‐State Sodium‐Ion Capacitors Developed Using 2D Metal–Organic‐Framework Array As Reactor