Abstract:Experimental and numerical investigation on the elastic properties of luffa–cenosphere‐reinforced epoxy hybrid composite. Estimating the elastic characteristics of natural fiber‐reinforced polymer composites such as luffa fiber reinforced with epoxy is challenging. The structure of luffa cylindrica is complex, like a three‐dimensional natural fibrous mat, netting‐like structure. The multiscale modeling of such structures is the challenge to be addressed. The prime objective of this work is to determine the specific elastic properties of luffa–cenosphere‐reinforced epoxy (LCE) composite, considering the effect of filler volume fractions. Furthermore, multiscale modeling techniques, such as representative volume elements (RVEs) of finite element techniques with chopped, unidirectional, plain, and twill weaving fiber arrangements, were employed. The longitudinal modulus, transverse modulus, shear modulus, and Poisson's ratio were predicted through these modeling approaches. However, experimental and analytical methodologies, including the rule of mixture and Halpin–Tsai, were considered to validate the finite element analysis results. The elastic characteristics of LCE composite were therefore shown to be enhanced by increasing filler volume fraction. However, the cenosphere's 20% volume fraction has the highest elastic properties as determined by analytical, experimental, and computational models. Analytical and finite element simulation results were compared with the experimental results, and based on the findings, the most suitable (unidirectional, chopped, plain, and twill weaving) RVE was identified for finite element modeling of LCE composite for the evaluation of elastic properties. Results from practical approaches and the RVE twill weaving model showed good agreement, with less than 1% error, compared to the other analytical and finite element methods. Highlights NFCs are gaining ground in polymer composites. Overcoming challenges in modeling of luffa fiber inside epoxy matrix. The study uses multiscale modeling with diverse fiber arrangements. Experimental and analytical methods used to confirm FEA results. Increased cenosphere volume fraction boosts LCE composite properties.

An Effective Model for Mechanical Properties of Nacre-Inspired Continuous Fiber-Reinforced Laminated Composites

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Cost-effective Fabrication of Bio-Inspired Nacre-Like Composite Materials with High Strength and Toughness

Bending Deformable Tension-Shear Model for Nacre-Like Composites

Microstructure and mechanical properties of bioinspired laminated CoCrFeNiMn high entropy alloy matrix composites reinforced with graphene

Nacre-like carbon fiber-reinforced biomimetic ceramic composites: Fabrication, microstructure, and mechanical performance

Multi-parameter Structural Optimization to Reconcile Mechanical Conflicts in Nacre-Like Composites

Nacre-inspired Design of CFRP Composite for Improved Energy Absorption Properties

Progress of Graphene-based Nacre-mimetic Layered Materials

Interfacially reinforced carbon fiber/epoxy composite laminates via in-situ synthesized graphitic carbon nitride (g-C3N4)

Optimal Length Scales Emerging from Shear Load Transfer in Natural Materials: Application to Carbon-Based Nanocomposite Design

An Strategy to Solve the Contradiction Between Strength and Toughness of Carbon Fiber Reinforced Composites: Discontinuous Nacre-Like Structure Design

Experimental and numerical investigation on the elastic properties of luffa–cenosphere‐reinforced epoxy hybrid composite

Improved Mechanical Performance of Graphene Oxide Based Artificial Nacre Composites by Regulating the Micro-Laminated Structure and Interface Bonding

Strong, tough, and thermally conductive nacre-inspired boron nitride nanosheet/epoxy layered nanocomposites

A Bioinspired Ultratough Composite Produced by Integration of Inorganic Ionic Oligomers within Polymer Networks

Single material FDM printed nacre-like composite structure with high fracture resistance: Utilizing interface as soft phase

Liquid crystal self-templating approach to ultrastrong and tough biomimic composites

Mechanical Characterization of Hybrid Steel Wire Mesh/Basalt/Epoxy Fiber-Reinforced Polymer Composite Laminates

Optimization Mechanism of Mechanical Properties of Basalt Fiber-Epoxy Resin Composites by Interfacially Enriched Distribution of Nano-Starch Crystals

Enhanced Mechanical Properties of CNTs/Mg Biomimetic Laminated Composites