Abstract:Carboxylated cellulose nanofibers (CNF‐C)/polydopamine‐coated nickel‐coated graphene (PDA‐Ni@GNS) composite films with high thermal conductivity are fabricated via layer‐by‐layer self‐assembly. With the development of 5G equipment, aerospace, sensors, thermal management devices and other fields in the direction of high power, high performance and miniaturization, the heat released during usage increases significantly, leaving great application prospects for heat dissipation materials. In spite of great attention paid to film materials due to their light weight and flexibility, they have the obvious disadvantage of poor thermal conductivity. In this work, carboxylated cellulose (CNF‐C)/dopamine‐coated nickel‐coated graphene (PDA‐Ni@GNS) composite films with high in‐plane thermal conductivity (in‐plane TC) have been fabricated by a simple vacuum‐assisted filtration method. In the prepared composite films, the flaky packing layers were found to be stacked orderly and form an excellent thermally conductive network, resulting in an increase in in‐plane TC by 322.1% (sample W4) as compared with that of neat films. By comparing the in‐plane TCs of the composite films with that of a commercial gasket, it was readily seen that the present composite films had fairly excellent heat dissipation properties. The composite exhibits not only sufficiently high in‐plane TC and tensile strength of 149.02 MPa but also exhibits hydrophobic property, imparting the composite films good working stability under extreme conditions, which ensured of their potential applications in thermal management materials. Highlights The introduction of Ni promotes the construction of heat conduction path. High in‐plane TC is obtained through layer‐by‐layer self‐assembly. The modification of filler enhanced the mechanical properties of the films. The modification of fillers led to the hydrophobicity of the film. The introduction of PDA made the films have insulating properties.

Highly thermally conductive nanocomposites synthesized by PVD for thermal management applications

Mille-Feuille Inspired Thermally Conductive Polymer Nanocomposites with Overlapping BN Nanosheets for Thermal Management Applications.

High thermal conductivity of GF@Cu@Ni/Si/Al composites reinforced with Cu and Ni co-deposited graphite flakes

High-Performance Thermal Management Nanocomposites: Silver Functionalized Graphene Nanosheets and Multiwalled Carbon Nanotube

Fabrication of Graphite Films/copper Composites by Vacuum Hot Pressing for High-Efficiency Thermal Management Property

Thermal management applied laminar composites with SiC nanowires enhanced interface bonding strength and thermal conductivity

The Liquid-Exfoliation of Graphene Assisted with Hyperbranched Polyethylene-G- Polyhedral Oligomeric Silsesquioxane Copolymer and Its Thermal Property in Polydimethylsiloxane Nanocomposite

High Thermal Conductivity and Mechanical Properties of Si@Graphite/Aluminum Nitride/aluminum Composites for High-Efficiency Thermal Management

Fabrication of Cu/graphite film/Cu sandwich composites with ultrahigh thermal conductivity for thermal management applications

Synergistic enhancing effect of tungsten-copper coated graphite flakes and aluminum nitride nanoparticles on microstructure, mechanical and thermal properties of copper matrix composites

High Thermal Conductivity and Mechanical Properties of Nanotube@Cu/Ag@Graphite/Aluminum Composites

High-performance thermal interface materials consisting of vertically aligned graphene film and polymer

Carboxylated cellulose composite film fabricated via layer‐by‐layer self‐sssembly for thermal management material with ultra‐high thermal conductivity

Highly Oriented Graphitic Networks Grown by Chemical Vapor Deposition As Thermal Interface Materials

Fabrication, Interface Characterization and Modeling of Oriented Graphite Flakes/Si/Al Composites for Thermal Management Applications

Fluorine-terminated functionalized liquid metal/silicon carbide binary nanoparticles for polyvinyl alcohol composite films with high in-plane thermal conductivity and ultra-low dielectric constant

Highly thermal conductive graphene/carbon nanotubes films with controllable thickness as thermal management materials

Significantly enhanced thermal conductivity and flame retardance by silicon carbide nanowires/graphene oxide hybrid network

Achieving high thermal conductivity in CNTs@GF/Al laminates via a rapid and simple strategy

Carbon/Aluminum Composites with High Thermal Conductivity for Thermal Management Applications

Highly Thermally Conductive Polymer Composites with Barnacle-Like Nano-Crystalline Diamond@Silicon Carbide Hybrid Architecture