Abstract:Multi-gigahertz fundamental repetition rate, tunable repetition rate and wavelength, ultrafast fiber lasers at wavelengths of 1.0, 1.5, and 2.0 µm are experimentally demonstrated and summarized. At the wavelength of 1.0 µm, the laser wavelength is tuned in the range of 1040.1-1042.9 nm and the repetition rate is shifted by 226 kHz in a 3-cm-long all-fiber laser by controlling the temperature of the resonator. Compared with a previous work where the maximum average power was 0.8 mW, the power in this study is significantly improved to 57 mW under a launched pump power of 213 mW, thus achieving an optical-to-optical efficiency of 27%. For comparison, a similar temperature-tuning technique is implemented in a Tm3+-doped ultrafast oscillator but, as expected, it results in a broader tunable range of 14.1 nm (1974.1-1988.2 nm) in wavelength as compared with the value of 1.8 nm for the wavelength of 1.0 µm. The repetition rate in the process is shifted by 294 kHz. For the high-frequency range from 100 kHz to 10 MHz, the value of integrated timing jitter gradually increases with an increase in temperature. Finally, to the best of our knowledge, for the first time, a new method for tuning wavelength and repetition rate is proposed and demonstrated for a femtosecond fiber laser at the wavelength of 1.5 µm. Through fine rotation of the alignment angle between the Er/Yb:glass fiber and a semiconductor saturable absorption mirror, the peak wavelength can be tuned in the range of 1591.4-1586.1 nm and the repetition rate is shifted by 60 kHz.

Ultrafast photonics of two dimensional AuTe 2 Se 4/3 in fiber lasers

Two-dimensional gold decorated indium selenide for near-infrared and mid-infrared ultrafast photonics

Optical Microfiber-Based Ultrafast Fiber Lasers

Topological insulator: Bi2Se3/polyvinyl alcohol film-assisted multi-wavelength ultrafast erbium-doped fiber laser

Ultrafast Raman fiber laser: a review and prospect

Self-phase modulation enabled, wavelength-tunable ultrafast fiber laser sources: an energy scalable approach.

Graphene/α-In2Se3 Heterostructure for Ultrafast Nonlinear Optical Applications

Graphene/α-In<sub>2</sub>Se<sub>3</sub> heterostructure for ultrafast nonlinear optical applications

Ultrafast and Large Optical Nonlinearity of a TiSe2 Saturable Absorber in the 2 Μm Wavelength Region

Two types of ultrafast mode-locking operations from an Er-doped fiber laser based on germanene nanosheets

Preparation of tellurium nanowires and its application in ultrafast photonics

Recent Advances of 2D Materials in Nonlinear Photonics and Fiber Lasers

Broadband Nonlinear Photonics in Zeolite-Based Selenium Chains

Quasi-2D Mn3Si2Te6 Nanosheet for Ultrafast Photonics

All-fiber GHz few-cycle pulse generation at 2 µm

Controllable Synthesis of Narrow-Gap van der Waals Semiconductor Nb 2 GeTe 4 with Asymmetric Architecture for Ultrafast Photonics

Graphene/WS2 Heterostructure Saturable Absorbers for Ultrashort Pulse Generation in L-band Passively Mode-Locked Fiber Lasers.

Nonlinear optical properties of PtTe<sub>2</sub> based saturable absorbers for ultrafast photonics

All-Fiber High-Power 3 GHz Ultrafast Laser System At 2.0 μm

Large-area tungsten disulfide for ultrafast photonics

High-repetition-rate Ultrafast Fiber Lasers.