Abstract:Transition metal oxides have attracted a special interest in the applications of energy storage and conversion devices because of their distinctive structural, electronic, and catalytic properties. In the current study, the effect of substrate temperature on binder-free undoped CuO and Cr-doped CuO (~4.5 at. %) thin-film electrodes prepared by radio frequency sputtering technique is reported for supercapacitor applications. X-ray diffraction studies revealed the formation of undoped CuO and Cr-doped CuO films with monoclinic structure, while field emission scanning electron microscopy showed a significant change in the shape and size of the grains as a function of the substrate temperature. X-ray mapping indicated a uniform distribution of the elements present in these films. Substitution of Cr of ~4.5 at. % has not altered the primary monoclinic structure of CuO, but the doped CuO thin-film electrodes showed an improved conductivity. The electrochemical supercapacitive performance of the thin-film electrodes was studied using cyclic voltammetry, galvanostatic cycling with potential limitation, and electrochemical impedance spectroscopy techniques in 1 M KOH. The electrochemical measurements revealed that the thin-film electrode of Cr-doped CuO electrode developed at the substrate temperature of 573 K exhibited the highest areal capacitance of 209 mF cm−2 at a scan speed of 10 mV s−1, which is five times higher than that of the pure CuO (38 mF cm−2) thin-film. Furthermore, the Cr-doped CuO thin-film electrode exhibited excellent cycling stability with the capacity retention of 88% for 3000 continuous CV cycles in 1 M KOH. These results suggested that the binder-free Cr-doped CuO film electrodes prepared at the substrate temperature of 573 K is an excellent candidate material for the supercapacitor applications.

Influence of crystallinity of CuCo2S4 on its supercapacitive behavior

Effect of reaction temperature on the amorphous-crystalline transition of copper cobalt sulfide for supercapacitors

Formation of Mixed Metal Sulfides of NixCu1−xCo2S4 for High-Performance Supercapacitors

Supercapacitive Performances of Ternary CuCo<sub>2</sub>S<sub>4</sub> Sulfides

Effect of Annealing on the Defects and Morphology of Cu9S5: Implication for Advanced Electrode for Asymmetric Supercapacitors

Constructing amorphous/crystalline heterointerface in cobalt sulfide for high-performance supercapacitors

Fabrication of CuO Nanowire Synthesized by Thermal Oxidation and Influence of the Fabrication Conditions on Capacitance of Supercapacitor Electrode

Study on the structure and supercapacitive properties of Mesoporous Co3 O4 nanosheets

Low Crystalline 2D CoSx Derived from Cobalt Carbonate Hydroxide by Sulfidation at Room Temperature for Supercapacitor

Microstructural and electrochemical supercapacitive properties of Cr‐doped CuO thin films: Effect of substrate temperature

Two-step hydrothermal synthesis of a fireworks-like amorphous Co3S4 for asymmetric supercapacitors with superior cycling stability

The Investigation of the Electrochemically Supercapacitive Performances of Mesoporous CuCo2S4

Superior cycling stability of a crystalline/amorphous Co3S4 core-shell heterostructure for aqueous hybrid supercapacitors

Electrospinning CoS2/carbon Nanofibers with Enhanced Stability As Electrode Materials for Supercapacitors

One pot and large-scale synthesis of nanostructured metal sulfides: Synergistic effect on supercapacitor performance

Enhanced Electrochemical Performance of CuCo2S4/carbon Nanotubes Composite As Electrode Material for Supercapacitors

Influence of iron concentration and post-annealing temperature on structure and pseudocapacitive characteristics of a MnO2–Fe2O3 nanocomposite

Intrinsic Energy-Storage Mechanism of Low Crystallinity Nickel-Cobalt Sulfide As Anode Material for Supercapacitors

One-Pot Synthesis of Tunable Crystalline Ni3 S4 @amorphous MoS2 Core/Shell Nanospheres for High-Performance Supercapacitors.

Preparation and theoretical analysis of NiCo2O4: xS series materials for high-performance supercapacitors

Facile Synthesis of Di Ff Erent Morphologies of Cu 2 SnS 3 for High-Performance Supercapacitors