Abstract:In order to reduce the impact of greenhouse gases on the environment, the development of various new CO2 capture materials has become a hot spot. In this work, a novel composite amine solid adsorbent was prepared by simultaneously using tetraethylenepentamine (TEPA) and 2-[2-(dimethylamino) ethoxy] ethanol (DMAEE) for amine functionalization on the polyester microsphere carrier. The introduction of methyl methacrylate (MMA) with high glass transition temperature into the polyester carrier makes the carrier microspheres have high hardness. At the same time, the carrier also contains active epoxy groups and hydrophobic glycidyl methacrylate (GMA, which can undergo ring-opening reaction with composite amines to achieve high-load and low-energy chemical grafting of amines on the carrier. The composite aminated polyester microspheres were used as an efficient adsorbent for CO2 in simulated flue gas. The results show that the synergistic effect of TEPA-DMAEE composite amine system in the adsorbent is beneficial to the improvement of CO2 capture capacity. When the total amine content in the impregnating solution is 45 wt% and the composite amine ratio is TEPA: DMAEE = 6: 4, the CO2 adsorption capacity can reach the optimal value of 2.45 mmol/ g at 70 °C. In addition, the composite amine microsphere adsorbent has cyclic regeneration performance. Importantly, through kinetic fitting, the Avrami kinetic model fits the CO2 adsorption better than the quasi-first-order and quasi-second-order kinetic models, which proves that physical adsorption and chemical adsorption coexist in the adsorption process. This simple, long-term stable and excellent selective separation performance makes amine-functionalized adsorbents have potential application prospects in CO2 capture.

Synthesis of Carboxymethyl Starch Grafted Poly (methacrylic Acids) (Cms-G-pmaas) and Their Application As an Adsorbent for the Removal of Ammonia and Phenol

Synthesis and Characterization of Carboxymethyl Starch-G-polyacrylic Acids and Their Properties As Adsorbents for Ammonia and Phenol

Synthesis of Carboxymethyl Starch Grafted Polyvinyl Imidazole (Cms-G-pvis) and Their Role As an Absorbent for the Removal of Phenol

Synthesis of Carboxymethyl Starch-G-polyvinylpyrolidones and Their Properties for the Adsorption of Rhodamine 6G and Ammonia

Synthesis of Succinylated Carboxymethyl Starches and Their Role As Adsorbents for the Removal of Phenol

Dual Modification of Starches by Phosphorylation and Grafting and Their Application As Adsorbents for the Removal of Phenol

Synthesis of Starch-Grafted Polymethyl Methacrylate via Free Radical Polymerization Reaction and Its Application for the Uptake of Methylene Blue

Preparation, Characterization and Adsorption Performance of a Novel Anionic Starch Microsphere

Synthesis of Succinylated Starches and Their Application as Adsorbents for the Removal of Phenol

Comparison of Carbonized Materials from Wastes of Different Origin for Nonylphenol Removal by Adsorption

Amino- and Thiol- Polysilsesquioxane Simultaneously Coating on Poly(p-Phenylenetherephthal Amide) Fibers: Bifunctional Adsorbents for Hg(II)

Preparation and Kinetics of Thermal Analysis of Inorganic–Organic Composite Modified Carboxymethyl Starch and Its Applicability as Flocculant for Oily Wastewater Treatment

Synthesis of carbon nanotubes grafted with copolymer of acrylic acid and acrylamide for phenol removal

Synthesis, adsorption and molecular simulation study of methylamine-modified hyper-cross-linked resins for efficient removal of citric acid from aqueous solution

Development of composite amine functionalized polyester microspheres for efficient CO2 capture

Study on adsorption of low-concentration methyl mercaptan by starch-based activated carbon

Cellulase modified waste biomass to remove sulfamethazine from aqueous solutions

Synthesis and Characterization of Amylose Grafted Poly(acrylic Acid) and Its Application in Ammonia Adsorption.

Kinetic and Isotherm Studies on the Adsorption of Ionic Liquids from Aqueous Solutions by Carboxymethyl Cellulose Modified with Sodium Methacrylate Sulfonate.

Carbon dioxide adsorption/desorption performance of single- and blended-amines-impregnated MCM-41 mesoporous silica in post-combustion carbon capture