Abstract:[Objective]The greatest disadvantage of wood in actual applications is its hygroscopicity, hydroxyl groups on the porous surface readily form hydrogen bonds with adsorted water molecules.In order to inhibit or reduce moisture adsorption on the surface of wood,this study fabricated superhydrophobic wood surfaces, therefore, prolong the lifetime of wood and improve its service performance, and provide a method for creation of superhydrophobic wood using plasma technology.[Method]Firstly,the radial sections of Acer saccharum Marsh.wood were etched for different times with an O2 plasma at a discharge power of 150 W and working pressure of 66 Pa.The effect of O2 plasma etching time on morphology and roughness of wood surfaces was investigated using scanning electron microscopy (SEM) and laser scanning confocal microscope (LSCM) profilometry.Then, the superhydrophobic wood were fabricated by plasma chemical vapor deposition of fluorocarbon film which has lower surface free energy on etched wood surfaces from a mixture of pentafluoroethane (PFE) and argon gas at a discharge power of 120 W and working pressure of 133 Pa.The wetting behavior of the treated wood was determined by static water contact angle and roll-off angle measurement.Furthermore, the morphology, thickness of deposited films , element composition and their chemical bonding information of wood surfaces before and after deposition treatment were also measured and analyzed by SEM, ellipsometer and X-ray photoelectron spectroscopy (XPS).[Result]The average roughness (Sa) , root mean square roughness (Sq) and peak-to-valley roughness (Sz) of wood surfaces increased with the etching time within 30 min.However, the wood surface roughness decreased slightly after prolonged etching time to 45 min.when the time of deposition fluorocarbon film was fixed at 40 s, the static water contact angles did not change significantly as a function of etching time, but the roll-off angles of wood surfaces decreased gradually with increasing etching time, moreover, the roll-off angles along the grain direction were always smaller than those across the grain direction.The static water contact angles of wood surfaces without prior O2 plasma etching displayed a gradually decreasing trend with the increasing of deposition time, and water drops always remained "pinned" to the wood surface even when the substrate was tilted to 90°.Ellipsometer results showed that the thickness of deposited films exhibited a linear increase trend with the increasing of deposition time.When the etching time was 15 min or 45 min, the static water contact angles did not change significantly as a function of deposition time, but the roll-off angles of wood surfaces reduced firstly and then increased with the increasing time for fluorocarbon film deposition.It should be noted that the static water contact angle of the sample treated by 45 min etching and deposition of fluorocarbon film for 40 s was as high as 160.6°±0.4° and showed the lowest roll-off angle of 11.5°±1.2°(along grain) and 14.7°±2.5°(across grain).XPS analysis showed that almost 50% fluorine atoms were found on the wood surfaces deposited with fluorocarbon film and the C1s spectra exhibited that the surface composition of fluorocarbon film was heterogeneous withC-CFx,-CF3,-CF2, and-CF groups indicating that this film was highly cross-linked.[Conclusion]This study demonstrated the probability to fabricate superhydrophobic wood surfaces with O2 plasma etching prior to fluorocarbon film deposition.The treated wood exhibited superhydrophobicity (the static water contact angle >150°) with low roll-off angles, and could avoid water droplets adhere to wood surface effectively.

Superhydrophobic Wood Grafted by Poly(2-(Perfluorooctyl)ethyl Methacrylate) Via ATRP with Self-Cleaning, Abrasion Resistance and Anti-Mold Properties

Fabrication of bulk superhydrophobic wood by grafting porous poly(divinylbenzene) to wood structure using isocyanatoethyl methacrylate

Superhydrophobic wood fabricated by epoxy/Cu 2 (OH) 3 Cl NPs/stearic acid with performance of desirable self-cleaning, anti-mold, dimensional stability, mechanical and chemical durability

Superhydrophobic wood fabricated by epoxy/Cu<sub>2</sub>(OH)<sub>3</sub>Cl NPs/stearic acid with performance of desirable self-cleaning, anti-mold, dimensional stability, mechanical and chemical durability

Imparting durable superhydrophobic/oleophobic properties to wood surfaces by means of PFDMS@MTCS vapor deposition

A novel two-step strategy to construct multifunctional superhydrophobic wood by liquid-vapor phase deposition of methyltrimethoxysilane for improving moisture resistance, anti-corrosion and mechanical strength

Superhydrophobic Wood Surface Fabricated by Cu2O Nano-Particles and Stearic Acid: Its Acid/alkali and Wear Resistance

Construction of a Superhydrophobic Wood Surface Coating by Layer-by-Layer Assembly: Self-Adhesive Properties of Polydopamine

Endowing Three-Dimensional Porous Wood with Hydrophobicity/Superhydrophobicity Based on Binary Silanization

The Superhydrophobic Properties for Wood Surfaces by Plasma Etching and Deposition of Fluorocarbon Film

Fabrication Of Superhydrophobic Wood Surface By Etching Polydopamine Coating With Sodium Hydroxide

Preparation of superhydrophobic wood surfaces via in-situ synthesis of Cu<sub>2</sub>(OH)<sub>3</sub>Cl nano-flowers and impregnating PF&STA to improve chemical and mechanical durability

Study on the Difference of Superhydrophobic Characteristics of Different Wood Furniture Substrates

A new insight into the design of robust superhydrophobic and fire retardant wood: Breaking the conflicting requirement on adhesives

Fabrication of superhydrophobic wood surface with enhanced environmental adaptability through a solution-immersion process

Fabrication of Superhydrophobic Wood Surface by a Sol–gel Process

Formulation of environmentally robust flame-retardant and superhydrophobic coatings for wood materials

Optimization of Durable Superhydrophobic Wood with Superstrong Ultraviolet Resistance and Chemical Stability

UV-Assisted Multiscale Superhydrophobic Wood Resisting Surface Contamination and Failure

Superhydrophobicity Wood with Reversible Photoresponsive Property

Hydrophobic Modification of Wood Using Tetramethylcyclotetrasiloxane