Abstract:Hall thruster has been used widely in orbit correction and station-keeping of geostationary satellites for the advantage of high specific impulse, long life, and high reliability. The cathode is an important part of Hall thruster, which can neutralize ion beam and provide electrons to the thruster for ionization. At present, the position of cathode can be divided into two kinds: internal cathode and external cathode. And the discharge parameters under the two different cathode positions is very different, such as the coupling voltage and the ion density. And this paper considers the mechanism of influence of the cathode position on the discharge process of Hall thruster, the discharge process of Hall thruster under internal and external cathode conditions was simulated by PIC-MCC simulation method. The simulation results show that the electron conduction near the thruster outlet is relatively strong under the internal cathode condition. The trajectory of electrons emitted from the cathode position under the two conditions is further simulated. The simulation results show that the electrons will be bound by the magnetic field and form a virtual cathode when they enter the simulation area. The lower coupling voltage under the internal cathode condition is explained by comparing the positions of virtual cathode. At the same time, some electrons emitted from the internal cathode position can quickly reach the main beam region. The ion density distribution is also compared. The ionization regions of Xe+, Xe2+ and Xe3+ ions are relatively outside under the internal cathode condition, and the peak densities of Xe2+ and Xe3+ ions are relatively low. Compared with the experimental results, it is shown that the electron trajectory in the plume region has a significant effect on the plume shape.

Effects of cathode operating parameters on the ignition voltage threshold of Hall thrusters

Study on the influence of change in axial position of cathode on the ignition process of a Hall thruster

Study on the Influence of the Discharge Voltage on the Ignition Process of Hall Thrusters

Effects of Operating Parameters on Ionization Distribution in Hall Thrusters

Newly designed ignition circuit to improve the ignition reliability of Hall thruster

Particle-in-cell simulation for effect of anode temperature on discharge characteristics of a Hall effect thruster

On Cathode Position and Inclination Angle in Magnetically Shielded Hall Thrusters

Simulation of Plasma Dynamics During Discharge Ignition in Hall Thruster

Simulation of discharge process of Hall thruster under the internal and external cathode conditions

Effect of Discharge Parameters on Pulse Current During Hall Thruster Start-Up

Hollow cathode discharge instability onset in electric thrusters

Study on Electrons Conduction Paths in Hall Thruster Ignition Processes with the Cathode Located Inside and Outside the Magnetic Separatrix

Effect of the Hollow Cathode Heat Power on the Performance of an Hall-Effect Thruster

Influences of Discharge Channel Width on Ionization Characteristics in Hall Thrusters

Effect of the Cathode on the 3d Plume Distribution of A Hall Thruster

Influence of acceleration stage electrode voltage on the performance of double-stage Hall effect thruster with adjustable zero magnetic point

Energy Balance Mechanism in Hall Thrusters under Different Voltages

Plasma dynamics of Hall thrusters under pulsating operation

Effect of Magnetic Field Configuration on Discharge Characteristic of a Hall Effect Thruster with a Variable Channel

Optimization of a Long-Lifetime Hall Thruster with an Internally Mounted Cathode

Impact of Exterior Electron Emission on the Self-Sustaining Margin of Hollow Cathode Discharge