Abstract:Based on a recently developed shakedown theory for non-smooth nonlinear materials, we derive a criterion for high-cycle fatigue in shape memory alloys (SMAs). The fatigue criterion takes into account phase transformation as well as reorientation of martensite variants as the source of fatigue damage. The mathematical derivation of the criterion is based on the requirement of elastic shakedown for a given structure to achieve unlimited fatigue endurance. Elastic shakedown is defined as an asymptotic state in which damage due to time-varying load becomes confined at the mesoscopic scale, or the scale of the grain, with no discernable inelasticity at the macroscopic scale. From an energy standpoint, elastic shakedown corresponds to a situation where energy dissipation becomes bounded and the response elastic after a certain number of loading cycles. A sufficient condition to achieve this state was established by Melan (1936) [1] and Koiter (1960) [2] for elastoplastic materials and later generalized to hardening plasticity by Nguyen (2003) and to non-smooth non-linear materials by Peigney (2014). The latter formulation is applicable to SMAs obeying the ZM constitutive model (Zaki & Moumni, 2007) and is shown here to allow the derivation of a high-cycle fatigue criterion analogous to the one proposed by Dang Van (1973) for elastoplastic materials. The criterion allows establishing a safe domain in stress deviator space at the mesoscopic scale consisting of a hypercylinder with axis parallel to the direction of martensite orientation. The hypercylinder is delimited along its axis by two transverse hyperplanes representing bounds on admissible stress states consistent with the loading conditions for phase transformation. Safety with regard to high-cycle fatigue, upon elastic shakedown, is conditioned by the persistence of the macroscopic stress path, as the load varies and at every material point, strictly within the hypercylinder. The size of the hypercylinder is shown to strongly depend on the relative amount of martensite present in the SMA.

Shape optimization of SMA structures with respect to fatigue

High-Cycle Fatigue Criterion for Shape Memory Alloys Based on Shakedown Theory

Topology optimization for energy dissipation structures based on shape memory alloys

Shakedown based model for high-cycle fatigue of shape memory alloys

Constitutive Modeling of Functional Fatigue with Tension-Compression Asymmetry for Superelastic NiTi Shape Memory Alloy

Study of Ultralow-Cycle Fatigue of Iron-Based SMA in Triaxial Stress States

Stored-energy-based Fatigue Criterion for Shape Memory Alloys

A Thermomechanically Coupled Finite Deformation Constitutive Model for Shape Memory Alloys Based on Hencky Strain

Mechanical properties and constitutive models of shape memory alloy for structural engineering: A review

DESIGN OPTIMIZATION OF C-SHAPED SUPERELASTIC SMA SHEET WITH CONSTANT FORCE

Multiphysics design of programmable shape-memory alloy-based smart structures via topology optimization

Quantification of Microscale Factors for Fatigue Failure in NiTi Shape Memory Alloys

An approach for the reliability-based design optimization of shape memory alloy structure

Experiment and simulation study on the functional fatigue of shape memory alloy beam actuators

Development of a constitutive model considering functional fatigue and pre-stretch in shape memory alloy wires

A 3D finite-strain-based constitutive model for shape memory alloys accounting for thermomechanical coupling and martensite reorientation

A Three-dimensional Constitutive Model for Polycrystalline Shape Memory Alloys Under Large Strains Combined With Large Rotations

Modeling Functional Fatigue of SMA Using a More Accurate Subdivision of Martensite Volume Fractions

A Three-Dimensional Model of Shape Memory Alloys under Coupled Transformation and Plastic Deformation

Modelling fatigue crack growth in shape memory alloys

A Three-Dimensional Constitutive Model for Shape Memory Alloy Considering Transformation-Induced Plasticity, Two-Way Shape Memory Effect, Plastic Yield and Tension-Compression Asymmetry