Abstract:The development of a new hard x-ray beamline I-TOMCAT equipped with a 1-meter-long short-period bulk high-temperature superconductor undulator (BHTSU) has been scheduled for the upgrade of the Swiss Light Source (SLS 2.0) at the Paul Scherrer Institute (PSI). The very hard x-ray source generated by the BHTSU will increase the brilliance at the beamline by over one order of magnitude in comparison to other state-of-the-art undulator technologies and allow experiments to be carried out with photon energies in excess of 60 keV. One of the key challenges for designing a 1-meter-long (100 periods) BHTSU is the large-scale simulation of the magnetization currents inside 200 staggered-array bulk superconductors. A feasible approach to simplify the electromagnetic model is to retain five periods from both ends of the 1-meter-long BHTSU, reducing the number of degrees of freedom (DOFs) to the scale of millions. In this paper, the theory of the recently-proposed 2D A-V formulation-based backward computation method is extended to calculate the critical state magnetization currents in the ten-period staggered-array BHTSU in 3D. The simulation results of the magnetization currents and the associated undulator field along the electron beam axis are compared with the well-known 3D H-formulation and the highly efficient 3D H-{\phi} formulation method, all methods showing excellent agreement with each other as well as with experimental results. The mixed H-{\phi} formulation avoids computing the eddy currents in the air subdomain and is significantly faster than the full H-formulation method, but is slower in comparison to the A-V formulation-based backward computation. Finally, the fastest and the most efficient A-V formulation in ANSYS 2020R1 Academic is adopted to optimize the integrals of the undulator field along the electron beam axis by optimizing the sizes of the end bulks.

Numerical Design Optimisation of Short-Period HTS Staggered Array Undulators

Fully-staggered-array bulk Re-Ba-Cu-O short-period undulator: large-scale 3D electromagnetic modelling and design optimization using A-V and H-formulation methods

HTS Undulator Design Study and First Results

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

Preliminary Study of EEHG-based Superradiant Undulator Radiation at the HLS-II Storage Ring

Strain Optimization for ReBCO High-Temperature Superconducting Stellarator Coils in SIMSOPT

The Optimal Design Of A 300mj Superconducting Magnet Using Hts Tapes

Design, construction, and magnetic field characterization of a Segmented Adaptive-Gap In-Vacuum Undulator prototype for NSLS-II

Development and Operation of a Pr2Fe14B Based Cryogenic Permanent Magnet Undulator for a High Spatial Resolution X-ray Beamline

Permanent-magnet Quadrupoles for an Interdigital H-mode Drift Tube Linear Accelerator: Optimization Code and Adjustable Magnet Design

Commissioning and optimization of superconducting undulator in the horizontal state

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet

Winding angle optimization and testing of small-scale, non-planar, high-temperature superconducting stellarator coils

Experimental results of a YBCO bulk superconducting undulator magnetic optimization

Empirical Optimization of Undulator Tapering at FLASH2 and Comparison with Numerical Simulations

Electromagnetic Design of a 16–9 T High Field Double Superconducting Magnets System for Nuclear Demagnetization Refrigerator

Design of the Magnets of the HALS Project

The Online Undulator Magnetic Field Measurement System

Ultra-Compact Ka-band linearizer for the Ultra-Compact X-Ray Free-Electron Laser at UCLA