Abstract:Accurate prediction of the self-propulsion performance is one of the most important factors for energy-efficient design of a ship. In general, the hydrodynamic performance of a full-scale ship could be achieved by model-scale simulation or towing tank test with extrapolations. With the development of CFD methods and computing power, directly predict ship performance with full-scale CFD is an important approach. In this article, a numerical study on the full-scale self-propulsion performance with propeller operating behind ship at model- and full-scale is presented. The study includes numerical simulations using RANS method with double-model and VOF model respectively and scale effect analysis based on overall performance, local flow fields and detailed vortex identification. Verification study on grid convergence is also performed for full-scale simulation with global and local mesh refinements. And a series of sea trail tests were performed to collect reliable data for the validation of CFD predictions. The analysis of scale effect on hull-propeller interaction shows that the difference on hull boundary layer and flow separation is the main source of scale effect on ship wake. And the results of the fluctuations of propeller thrust and torque along with circulation distribution and local flow field show that propeller’s loading is significantly higher for model-scale ship. It is suggested that the difference on vortex evolution and interaction is more pronounced and have larger effects on ship’s powering performance at model-scale than full-scale according to the simulation results. From the study on self-propulsion prediction, it could be concluded that the simplification on free surface treatment does not only affect the wave-making resistance for bare hull but also the propeller performance and propeller induced ship resistance which can produced up to 5% uncertainty to the power prediction. Roughness is another important factor in full-scale simulation because it has up to approximately 7% effect on the delivery power. As a result of validation study, the numerical simulations of full-scale ship self-propulsion shows good agreement with the sea trail data especially for cases that have considered both roughness and free surface effects. This result will largely enhance our confidence to apply full-scale simulation in the prediction of ship’s self-propulsion performance in the future ship designs.

Comprehensive Test System for Ship-Model Resistance and Propulsion Performance in Actual Seas

Study on the Resistance of a Large Pure Car Truck Carrier with Bulbous Bow and Transom Stern

Propulsion performance of large-scale ship model in real sea environment

Model Analysis of Green Water Phenomena and Loading for Ship Sailing with Slow Speed

Experimental Study on Dynamical Characteristics of Ship Lift System

Numerical Study of Hydrodynamic Performance of A High Maneuverability Ocean Engineering Ship with Pod Propeller Design

Effects of adverse sea conditions on the dynamic performance of a cruise ship integrated power system

Predicting practical ship powering and speed loss in waves using added resistance test results

Simulation strategy of the full-scale ship resistance and propulsion performance

Numerical Analysis of Full-scale Ship Self-Propulsion Performance with direct Comparison to Statistical Sea Trail Results

Research on ship motion characteristics in a cross sea based on computational fluid dynamics and potential flow theory

A comprehensive propulsion system analysis: an integrated approach utilising engine simulation and free-running model experiments

Digital Simulation of Ship Power System With Electric Propulsion

RANSE simulations for unmanned sailboat performance prediction: Coupling aerodynamics and hydrodynamics in self-sailing

Vibration Response Analysis of a New Scientific Research Ship Based on Finite Element Modeling

Full-scale simulation of self-propulsion for a free-running submarine

Ship maneuvering prediction based on virtual captive model test and system dynamics approaches

Assessment of Different Hybrid Methods for Simulations of Free Running Surface Ship Maneuvering in Waves

Resistance Performance of a Ship in Model-Scaled Brash Ice Fields Using CFD and DEM Coupling Model

Investigation of the efficiency of wind-assisted systems using model-based design approach

Full-scale CFD simulations for the determination of ship resistance as a rational, alternative method to towing tank experiments