Abstract:The slab laser is a promising architecture to achieve high beam quality and high power. By propagating the laser beams in zigzag geometries, the temperature gradient in the gain medium can be well averaged, and the beam quality in this direction can be excellent. However, the temperature gradient in the non-zigzag direction is not compensated, resulting in aberrations in this direction which lead to poorer beam quality. Among the overall aberrations, the main contributors are two low-order aberrations: astigmatism and defocus. These aberrations will magnify beam divergence angle and degrade beam quality. If the beam divergence angles in both directions are almost zero, the astigmatism and defocus are well corrected. Besides, the output beams of slab lasers are generally in a rectangular aperture with high aspect ratio (normally 1: 10), which need to be reshaped into square in many applications. In this paper, a new method is proposed to correct low-order aberrations and reshape the beams of slab lasers. Three lenses are adapted, one is a spherical lens and the others are cylindrical lenses. These lenses work as a beam shaping system, which converts the beam from rectangular into square and the low-order aberrations are compensated simultaneously. Two wavefront sensors are used to detect input and output beam parameters. The initial size of the beam is 4mmx20mm, and peak to valley (PV) value of the wavefront is several tens of microns. Simulation results show that after correction, the dimension becomes 40mmx40mm, and peak to valley (PV) value of the wavefront is less than 1microns.

Adjustable Slab-Aberration Compensator for High Power Slab Laser.

Automatic Low-Order Aberration Compensator for Solid-State Slab Lasers

Actively Compensation of Low Order Aberrations by Refractive Shaping System for High Power Slab Lasers

Beam Wavefront Dynamical Compensation by Aberrations of the Gain Medium in Laser Amplifiers for Beam Quality Improvement.

Automatic Low-Order Aberrations Compensator for a Conduction-Cooled End-Pumped Solid-State Zigzag Slab Laser

Automatic Low-Order Aberration Correction Based on Geometry Optics: Simulations

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

Aberrations Correction of a Nd:YAG Slab Amplifier Using a Compact Adaptive Optics System

Adaptive aberration correction of a 5 J/6.6 ns/200 Hz solid-state Nd:YAG laser.

Compensation of Low Order Aberrations with Reflective Beam Shaping System

Automatic Low-Order Aberration Correction Based on Geometrical Optics for Slab Lasers.

Adaptive Slab Laser Beam Quality Improvement Using A Weighted Least-Squares Reconstruction Algorithm

Study of Deformable Mirror for Compensating the Thermally Induced Aberration of Laser Diode-Pumped Solid-State Laser

Active compensation of low-order aberrations with reflective beam shaper

A Micro-Adaptive Optics System for Aberrated Laser Beams Compensation

Recent progress of adaptive beam cleanup of solid-state slab lasers in Institute of Optics and Electronics, Chinese Academy of Sciences

Enhancement of the Beam Quality of Non-Uniform Output Slab Laser Amplifier with a 39-Actuator Rectangular Piezoelectric Deformable Mirror.

Investigation on high power phase compensation of strong aberrations via stimulated Brillouin scattering

Dynamic Chromatic Aberration Pre-Compensation Scheme for Ultrashort Petawatt Laser Systems

Investigation of Solid-State Lasers Aberration Compensation Using an Intra-Cavity Adaptive Optic Mirror

Wavefront Shaping by A Small-Aperture Deformable Mirror in the Front Stage for High-Power Laser Systems