Direct Solar Thermochemical Conversion of Methanol into Syngas Via Nanocatalysts at Lower Temperatures

Jia Zeng,Xiaoxiao Yu,Yimin Xuan,Qiang Li,Dong Liu

DOI: https://doi.org/10.1039/c9se01227c

IF: 6.813

2020-01-01

Sustainable Energy & Fuels

Abstract:With efficient solar absorption and a suitable methanol supply rate, decomposition is realized with catalyst nanoparticles.

What problem does this paper attempt to address?

Enhancing Low-Temperature Methane Conversion on Zn/ZSM-5 in the Presence of Methanol by Regulating the Methanol-to-aromatics Reaction Pathway

Zhixiang Xi,Bingjie Zhou,Yue Yu,Binbo Jiang,Zuwei Liao,Jingdai Wang,Zhengliang Huang,Yao Yang,Jingyuan Sun,Yongrong Yang

DOI: https://doi.org/10.1039/d0cy00449a

IF: 6.177

2020-01-01

Catalysis Science & Technology

Abstract:The co-reaction method provides an efficient strategy for methane conversion under mild conditions, which is of urgent importance for direct valorization of natural gas to liquid hydrocarbons.
Direct Solar-Thermal Scalable-Decomposition of Methanol Flowing Through a Nanoparticle-Packed Bed Reactor under Outdoor Environment

Jia Zeng,Yimin Xuan,Qiang Li

DOI: https://doi.org/10.1016/j.energy.2023.128187

IF: 9

2023-01-01

Energy

Abstract:Using nanoparticles to absorb sunlight and drive methanol decomposition is a potential approach of solar energy utilization, which can convert solar energy into chemical energy of syngas. But a challenge of nanoparticle solar methanol decomposition is how to design concise and efficient large-scale application method. Focusing on the key issues of energy conversion and reaction system optimization, this work analyzes the sunlight capture, flow heat transfer and catalytic reaction in the nanoparticle volumetric absorption solar methanol decomposition system by theoretical and experimental studies. And the applied scalable solar-chemical system is constructed. The results show that the reaction bed constructed by nanoparticles has advanced solar energy capture performance, and can effectively drive the methanol decomposition. Compared with the traditional system, it has the lower solar concentration ratio of 17.5 and the higher energy conversion efficiency of 35.5%, and the reaction can be started up at the temperature of 136 °C. The cumulative solar-to-fuel energy conversion in this work can reach 1.3 × 1011 J/m2 in one year of operation in Nanjing, China. This work can further guide the construction of solar-driven thermochemical systems of splitting methanol into syngas and storing solar energy.
Efficient Conversion of Methane to Aromatics in the Presence of Methanol at Low Temperature

Zhixiang Xi,Bingjie Zhou,Binbo Jiang,Jingdai Wang,Zuwei Liao,Zhengliang Huang,Yongrong Yang

DOI: https://doi.org/10.1016/j.mcat.2019.110493

IF: 4.6

2019-01-01

Molecular Catalysis

Abstract:The efficient utilization of methane has long been extremely challenging, especially at relatively mild conditions. We present a novel approach to convert methane to benzene, toluene, and xylene (BTX) efficiently on Zn/ZSM-5 catalyst in the presence of methanol at relatively mild reaction conditions (the range of temperature is 400-500 degrees C and molar ratio (n(CH3OH)/n(CH4)) of 0.4-1.2), which is in the preferred reaction condition for the methanol to aromatics process (MTA). The methane conversion reaches 14.8% and the BTX selectivity is increased by 9.3% using the co-reaction of methane with methanol, which is systematically studied using AAS, XRD, NH3-TPD, and N-2 adsorption and desorption. Our results show that the presence of strong acid sites, loaded Zn metals, and methanol in the feedstock are indispensable conditions for methane transformation at low temperature. The incorporation of methane carbon into the aromatics is directly evidenced by the C-13 NMR spectroscopy. In addition, the kinetic experiments show that the presence of methanol significantly reduces the activation barrier for methane conversion. Therefore, our approach to efficiently convert CH4 into aromatics at low temperature and improve BTX selectivity in MTA reactions potentially facilitates the industrialization of MTA.
Solar-driven low-temperature reforming of methanol into hydrogen via synergetic photo- and thermocatalysis

Xiaoxiao Yu,Lili Yang,Yimin Xuan,Xiang Lei Liu,Kai Zhang

DOI: https://doi.org/10.1016/j.nanoen.2021.105953

IF: 17.6

2021-06-01

Nano Energy

Abstract:<p>Low temperature and efficient hydrogen production from methanol is crucial in development of energy technology. Here a synergetic approach of photo- and thermocatalysis of coupling photocatalysis and thermocatalysis within the full spectrum is proposed to achieve efficient conversion of methanol to hydrogen. The composite copper/zinc/zirconium (Cu/Zn/Zr) oxide nanocatalysts are prepared and firstly utilized in synergetic photo- and thermocatalysis. Combine with the effect of the catalyst component and mass ratio on optical absorption, Cu/Zn/Zr (70:23:7) oxide nanocatalysts with full-spectrum absorption have best performance of synergetic photo- and thermocatalysis. Meanwhile, the synergetic photo- and thermocatalysis not only has better performance than either single photocatalysis or thermocatalysis, but also takes place at a relatively low temperature (130 °C). Under irradiation of 16 suns, the solar-chemical conversion efficiency reaches 45.6%. Photo-generated carriers further promote thermocatalysis, which explains the reaction mechanism of the synergetic photo- and thermocatalysis. The catalytic route in full spectrum can provide some references for future energy storage and utilization.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Selective light absorber-assisted single nickel atom catalysts for ambient sunlight-driven CO 2 methanation

Yaguang Li,Jianchao Hao,Hui Song,Fengyu Zhang,Xianhua Bai,Xianguang Meng,Hongyuan Zhang,Shufang Wang,Yong Hu,Jinhua Ye

DOI: https://doi.org/10.1038/s41467-019-10304-y

IF: 16.6

2019-01-01

Nature Communications

Abstract:Ambient sunlight-driven CO 2 methanation cannot be realized due to the temperature being less than 80 °C upon irradiation with dispersed solar energy. In this work, a selective light absorber was used to construct a photothermal system to generate a high temperature (up to 288 °C) under weak solar irradiation (1 kW m −2 ), and this temperature is three times higher than that in traditional photothermal catalysis systems. Moreover, ultrathin amorphous Y 2 O 3 nanosheets with confined single nickel atoms (SA Ni/Y 2 O 3 ) were synthesized, and they exhibited superior CO 2 methanation activity. As a result, 80% CO 2 conversion efficiency and a CH 4 production rate of 7.5 L m −2 h −1 were achieved through SA Ni/Y 2 O 3 under solar irradiation (from 0.52 to 0.7 kW m −2 ) when assisted by a selective light absorber, demonstrating that this system can serve as a platform for directly harnessing dispersed solar energy to convert CO 2 to valuable chemicals.
Solar-powered Methanol Synthesis from CO2 Hydrogenation with High Conversion and Selectivity

Lingzhen Zeng,Yongfang Sun,Tingting Wang,Zeyan Cen,Maolin Wang,Oriol Angurell,Meng Wang,Ding Ma

DOI: https://doi.org/10.1007/s11426-024-2318-8

2024-01-01

Science China Chemistry

Abstract:Methanol synthesis via CO2 hydrogenation stands as a pivotal avenue for CO2 conversion and fixation, garnering extensive investigation. Diverse reactor configurations and energy supplies, alongside a spectrum of catalyst formulations, have been developed to enhance reaction metrics including conversion, selectivity, productivity, and stability. Integrating state-of-the-art Cu-based catalysts from thermal catalysis into a photothermal reactor yielded notable results, achieving an overall CO2 conversion of 98
Near‐Unity Photothermal CO2 Hydrogenation to Methanol based on a Molecule/Nanocarbon Hybrid Catalyst

Jia Zhu,Siyun Ren,Junnan Han,Zhengwei Yang,Jie Liang,Shijia Feng,Xing Zhang,Jun Xu

DOI: https://doi.org/10.1002/anie.202416376

2024-11-07

Angewandte Chemie International Edition

Abstract:Solar-driven CO2-to-methanol conversion provides an intriguing route for both solar energy storage and CO2 mitigation. For scalable applications, near-unity methanol selectivity is highly desirable to reduce the energy and cost endowed by low-value byproducts and complex separation processes, but so far has not been achieved. Here we demonstrate a molecule/nanocarbon hybrid catalyst composed of carbon nanotube-supported molecularly dispersed cobalt phthalocyanine (CoPc/CNT), which synergistically integrates high photothermal conversion capability for affording an optimal reaction temperature with homogeneous and intrinsically-efficient active sites, to achieve a catalytic activity of 2.4 mmol gcat-1 h-1 and selectivity of ~99% in direct photothermal CO2 hydrogenation to methanol reaction. Both theoretical calculations and operando characterizations consistently confirm that the unique electronic structure of CoPc and appropriate reaction temperature cooperatively enable a thermodynamic favorable reaction pathway for highly selective methanol production. This work represents an important milestone towards the development of advanced photothermal catalysts for scalable and cost-effective CO2 hydrogenation.

chemistry, multidisciplinary
Ambient sunlight-driven photothermal methanol dehydrogenation for syngas production with 32.9 % solar-to-hydrogen conversion efficiency

Xianhua Bai,Dachao Yuan,Yaguang Li,Hui Song,Yangfan Lu,Xingyuan San,Jianmin Lu,Guangsheng Fu,Shufang Wang,Jinhua Ye

DOI: https://doi.org/10.1016/j.isci.2021.102056

IF: 5.8

2021-02-01

iScience

Abstract:Methanol dehydrogenation is an efficient way to produce syngas with high quality. The current efficiency of sunlight-driven methanol dehydrogenation is poor, which is limited by the lack of excellent catalysts and effective methods to convert sunlight into chemicals. Here, we show that atomically substitutional Pt-doped in CeO2 nanosheets (Pts-CeO2) exhibit excellent methanol dehydrogenation activity with 500-hr level catalytic stability, 11 times higher than that of Pt nanoparticles/CeO2. Further, we introduce a photothermal conversion device to heat Pts-CeO2 up to 299°C under 1 sun irradiation owning to efficient full sunlight absorption and low heat dissipation, thus achieving an extraordinarily high methanol dehydrogenation performance with a 481.1 mmol g-1 h-1 of H2 production rate and a high solar-to-hydrogen (STH) efficiency of 32.9%. Our method represents another progress for ambient sunlight-driven stable and active methanol dehydrogenation technology.
High efficient sunlight-driven CO2 hydrogenation to methanol over NiZn intermetallic catalysts under atmospheric pressure

Linjia Han,Fanqi Meng,Xianhua Bai,Qixuan Wu,Yanhong Luo,Jiangjian Shi,Yaguang Li,Dongmei Li,Qingbo Meng

2024-04-22

Abstract:The synthesis of solar methanol through direct CO2 hydrogenation using solar energy is of great importance in advancing a sustainable energy economy. In this study, non-precious NiZn intermetallic/ZnO catalyst is reported to catalyze the hydrogenation of CO2 to methanol using sunlight irradiation (1sun). The NiZn-ZnO interface is identified as the active site to stabilize the key intermediates of HxCO*. At ambient pressure, the NiZn-ZnO catalyst demonstrates a methanol production rate of 127.5 umol g-1h-1 from solar driven CO2 hydrogenation, with a remarkable 100% selectivity towards methanol in the total organic products. Notably, this production rate stands as the highest record for photothermic CO2 hydrogenation to methanol in continuous-flow reactors with sunlight as the only requisite energy input. This discovery not only paves the way for the development of novel catalysts for CO2 hydrogenation to methanol but also marks a significant stride towards a full solar-driven chemical energy storage.

Materials Science,Applied Physics
Photocatalytic and Thermocatalytic Conversion of Methane

Zhonghua Li,Zhiguo Yi,Zhaosheng Li,Zhigang Zou

DOI: https://doi.org/10.1002/solr.202000596

IF: 9.1726

2021-01-01

Solar RRL

Abstract:Methane, a high‐quality fuel and important chemical raw material, is widely used in industrial production and life applications. However, the utilization and conversion rates of methane are low because methane is a very stable hydrocarbon gas. At present, the main industrial route of methane conversion involves thermocatalysis technology operating at high temperature. However, this approach has the disadvantages of high energy consumption, high equipment requirements, and high reaction temperature, resulting in shortened catalyst lifetime. Therefore, there is an urgent need to develop a new technology that can effectively utilize and transform methane under mild conditions to obtain the target products. As a kind of clean and renewable energy, solar energy has attracted extensive attention, and research on the effective conversion of methane by solar energy has become an important field. Herein, the recent achievements of solar energy in promoting or driving the catalytic conversion of methane are reviewed. The selection and design of photocatalysts used in different photocatalytic methane conversion reactions are focused on, which may provide important guidance for future research on this process. The prospects and challenges of photocatalytic methane conversion are also discussed.
Photocatalytic Hydrogenation of Carbon Dioxide with High Selectivity to Methanol at Atmospheric Pressure

Lu Wang,Mireille Ghoussoub,Hong Wang,Yue Shao,Wei Sun,Athanasios A. Tountas,Thomas E. Wood,Hai Li,Joel Yi Yang Loh,Yuchan Dong,Meikun Xia,Young Li,Shenghua Wang,Jia,Chenyue Qiu,Chenxi Qian,Nazir P. Kherani,Le He,Xiaohong Zhang,Geoffrey A. Ozin

DOI: https://doi.org/10.1016/j.joule.2018.04.013

IF: 46.048

2018-01-01

Joule

Abstract:Summary The production of solar methanol, directly from gaseous CO2 and H2, is important for the development of a sustainable energy economy. Despite growing activity in the field, very few photocatalysts exist that can efficiently and stably hydrogenate gaseous CO2 to methanol at ambient pressure with high selectivity. Here, we report that a defect-laden indium oxide, In2O3−x(OH)y, with a rod-like nanocrystal superstructure, can photocatalyze the hydrogenation of CO2 to methanol with 50% selectivity under simulated solar irradiation. Notably, the solar methanol production of the In2O3−x(OH)y nanocrystal superstructures can be stabilized at a rate of 0.06 mmol gcat−1 h−1 at atmospheric pressure. This is 120 times higher than that of the best-known photocatalysts. This discovery bodes well for the development of a low-pressure solar methanol process using CO2 and renewable H2 feedstocks.
Supercharged CO2 Photothermal catalytic Methanation: High Conversion, Rate, and Selectivity.

Honghai Miao,Shenghua Wang,Xiang-Lin Zhu,Hui-long Zong,Wei Sun,Zaiyong Jiang,Guixin Zeng,Camilo J. Viasus Pérez,Hui Xu,G. Ozin,Z. Yuan

DOI: https://doi.org/10.1002/anie.202218694

2023-03-27

Angewandte Chemie

Abstract:To overcome the thermodynamic and kinetic impediments of the Sabatier CO2 methanation reaction, the process must be operated under very high temperature and pressure conditions, to obtain an industrially viable conversion, rate, and selectivity. Herein, we report that these technologically relevant performance metrics have been achieved under much milder conditions using solar rather than thermal energy, where the methanation reaction is enabled by a novel nickel-boron nitride catalyst. In this regard, an in situ generated HOB⋅⋅⋅B surface frustrated Lewis's pair is considered responsible for the high Sabatier conversion 87.68%, reaction rate 2.03 mol gNi-1h-1, and near 100% selectivity, realized under ambient pressure conditions. This discovery bodes well for an opto-chemical engineering strategy aimed at the development and implementation of a sustainable 'Solar Sabatier' methanation process.

Chemistry,Environmental Science,Engineering,Medicine
Highly efficient solar-driven CO2-to-fuel conversion assisted by CH4 over NiCo-ZIF derived catalysts

Xianglei Liu,Zekai Mu,Chen Sun,Hang Shi,Xianguang Meng,Ping Li,Yueyue Ling,Bo Cheng,Yimin Xuan,Yulong Ding

DOI: https://doi.org/10.1016/j.fuel.2021.122441

IF: 7.4

2022-02-01

Fuel

Abstract:Solar-driven CO2 reduction by CH4 is promising to simultaneously tackle energy shortage and global warming problems by converting two greenhouse gases into fuels. However, serious challenges remain, such as limited light-to-fuel efficiency, high operating temperature, and severe catalyst deactivation. Here, high-performance direct solar-driven CO2 reduction is demonstrated at relatively low operation temperature (594 °C) based on NiCo-ZIF derived nanostructures. An ultrahigh light-to-fuel efficiency of 32.4% and production rates of H2 (105.83 min−1g−1) and CO (128.17 mmol min−1g−1) are achieved via photothermocatalysis on Ni1Co2@CZIF-Al2O3 catalysts. Excellent light-to-fuel conversion performance can be attributed to the highly dispersed metal particles, decreased apparent activation energy under direct light illumination, increased CO2 absorption, and promoted dissociation of CH4 to CH3* of NiCo alloy. The carbon deposition rate of NiCo bimetallic catalysts is prominently inhibited compared with pure Ni or Co catalysts due to the change of the reaction path, as confirmed by DFT calculations. This work opens new routes to achieve highly efficient solar-driven CO2 reduction by CH4 based on NiCo-ZIF derived alloy nanostructures at relatively low-temperature conditions.

energy & fuels,engineering, chemical
Boosting photo-thermal co-catalysis CO2 methanation by tuning interface electron transfer via Mott-Schottky heterojunction effect

Zhourong Xiao,Peng Li,Hui Zhang,Senlin Zhang,Yanyan Zhao,Jianmin Gu,Zhiyou Lian,Guozhu Li,Ji-Jun Zou,Desong Wang

DOI: https://doi.org/10.1016/j.jcis.2024.06.052

2024-10-15

Abstract:Photo-thermal co-catalytic reduction of CO2 to synthesize value-added chemicals presents a promising approach to addressing environmental issues. Nevertheless, traditional catalysts exhibit low light utilization efficiency, leading to the generation of a reduced number of electron-hole pairs and rapid recombination, thereby limiting catalytic performance enhancement. Herein, a Mott-Schottky heterojunction catalyst was developed by incorporating nitrogen-doped carbon coated TiO2 supported nickel (Ni) nanometallic particles (Ni/x-TiO2@NC). The optimal Ni/0.5-TiO2@NC sample displayed a conversion rate of 71.6 % and a methane (CH4) production rate of 65.3 mmol/(gcat·h) during photo-thermal co-catalytic CO2 methanation under full-spectrum illumination, with a CH4 selectivity exceeding 99.6 %. The catalyst demonstrates good stability as it shows no decay after two reaction cycles. The Mott-Schottky heterojunction catalysts display excellent efficiency in separating photo-generated electron-hole pairs and elevate the catalysts' temperature, thus accelerating the reaction rate. The in-situ experiments revealed that light-induced electron transfer effectively facilitates H2 dissociation and enhances surface defects, thereby promoting CO2 adsorption. This study introduces a novel approach for developing photo-thermal catalysts for CO2 reduction, aiming to enhance solar energy utilization and facilitate interface electron transfer.
Efficient solar-driven: Photothermal catalytic reduction of atmospheric CO2 at the gas-solid interface by CuTCPP/MXene/TiO2

Feng Yue,Yang Meng,Shuo Zhang,Cong Li,Mengke Shi,Xuhui Qian,Lan Wang,Yali Song,Jun Li,Yongpeng Ma,Hongzhong Zhang

DOI: https://doi.org/10.1016/j.jcis.2024.08.018

2024-08-05

Abstract:Directly capturing atmospheric CO2 and converting it into valuable fuel through photothermal synergy is an effective way to mitigate the greenhouse effect. This study developed a gas-solid interface photothermal catalytic system for atmospheric CO2 reduction, utilizing the innovative photothermal catalyst (Cu porphyrin) CuTCPP/MXene/TiO2. The catalyst demonstrated a photothermal catalytic performance of 124 μmol·g-1·h-1 for CO and 106 μmol·g-1·h-1 for CH4, significantly outperforming individual components. Density functional theory (DFT) results indicate that the enhanced catalytic performance is attributed to the internal electric field between the components, which significantly enhances carrier utilization. The introduction of CuTCPP reduces free energy of the photothermal catalytic reaction. Additionally, the local surface plasmon resonance (LSPR) effect and high-speed electron transfer properties of MXene further boost the catalytic reaction rate. This well-designed catalyst and catalytic system offer a simple method for capturing atmospheric CO2 and converting it in-situ through photothermal catalysis.
Supra‐Photothermal CO2 Methanation Over Greenhouse‐Like Plasmonic Superstructures of Ultra‐Small Cobalt Nanoparticles

Mujin Cai,Chaoran Li,Xingda An,Biqing Zhong,Yuxuan Zhou,Kun Feng,Shenghua Wang,Chengcheng Zhang,Mengqi Xiao,Zhiyi Wu,Jiari He,Chunpeng Wu,Jiahui Shen,Zhijie Zhu,Kai Feng,Jun Zhong,Le He

DOI: https://doi.org/10.1002/adma.202308859

IF: 29.4

2023-11-08

Advanced Materials

Abstract:Improving the solar‐to‐thermal energy conversion efficiency of photothermal nanomaterials at no expense of other physicochemical properties, e.g. the catalytic reactivity of metal nanoparticles, is highly desired for diverse applications but remains a big challenge. Herein, we develop a synergistic strategy for enhanced photothermal conversion by a greenhouse‐like plasmonic superstructure of 4‐nm cobalt nanoparticles while maintaining their intrinsic catalytic reactivity. The silica shell plays a key role in retaining the plasmonic superstructures for efficient use of the full solar spectrum, and reducing the heat loss of cobalt nanoparticles via the nano‐greenhouse effect. The optimized plasmonic superstructure catalyst exhibits supra‐photothermal CO2 methanation performance with a record‐high rate of 2.3 mol·gCo−1·h−1, close to 100% CH4 selectivity, and desirable catalytic stability. This work reveals the great potential of nanoscale greenhouse effect in enhancing photothermal conversions through the combination with conventional promoting strategies, shedding light on the design of efficient photothermal nanomaterials for demanding applications. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Solar-Energy-Mediated Methane Conversion

Hui Song,Xianguang Meng,Zhou-jun Wang,Huimin Liu,Jinhua Ye

DOI: https://doi.org/10.1016/j.joule.2019.06.023

IF: 46.048

2019-01-01

Joule

Abstract:The conversion of methane to upgraded fuels and higher-value chemicals such as hydrogen, methanol, and olefins is a promising technology in the supply of chemicals and energy. However, current commercial methane conversion technology suffers from intense energy consumption. It is highly desirable to develop novel technologies for methane conversion with improved efficiency and lower cost. Solar energy, the most abundant and clean renewable energy, has been utilized as a new stimulus to drive methane conversion under mild conditions. In this review, recent achievements in solar-energy-mediated catalytic methane conversion are highlighted. We focus on the photocatalytic conversion of methane in photocatalytic systems, photoelectrochemical systems, and photoenhanced thermocatalytic systems. We discuss the challenges and prospects of future research on solar-energy-mediated methane conversion and aim to acquire in-depth understanding of the photo-mediated activation of the C-H bond and provide guidelines for the design of highly efficient catalysts.
Solar Photocatalytic Oxidation of Methane to Methanol with Water over RuOx/ZnO/CeO2 Nanorods

Dan Yu,Yanyan Jia,Zhou Yang,Hongwen Zhang,Jiwu Zhao,Yibo Zhao,Bo Weng,Wenxin Dai,Zhaohui Li,Pengzhao Wang,Julian A. Steele,Maarten B. J. Roeffaers,Sheng Dai,Haowei Huang,Jinlin Long

DOI: https://doi.org/10.1021/acssuschemeng.1c07162

IF: 8.4

2021-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Due to the high stability and chemical inertia of methane, CH4, its selective conversion into value-added organic chemicals under mild conditions has been widely regarded as an important reaction for the chemical industry. Here, we develop a RuOx decorated ZnO/CeO2 photocatalyst for the highly efficient and selective transformation of CH4 into CH3OH under simulated solar light irradiation. The CH3OH generation rate over the optimized RuOx/ZnO/CeO2 composite is 133.54 mu mol g(-1) h(-1) with 97.7% selectivity, which is 20 times higher than that of a ZnO/CeO2 reference system (6.56 mu mol g(-1) h(-1)) which only exhibits moderate selectivity (40.5%). We find that the significant boost to the photocatalytic performance is attributable to accelerated interfacial charge separation and a beneficial rise in free hydroxyl radical generation from water oxidation in the presence of RuOx clusters.
Thermo–Photo Catalysis for Methanol Synthesis from Syngas

Xuechen Wu,Junyu Lang,Yueyue Jiang,Yan Lin,Yun Hang Hu

DOI: https://doi.org/10.1021/acssuschemeng.9b05657

IF: 8.4

2019-01-01

ACS Sustainable Chemistry & Engineering

Abstract:It is well-known that the synthesis of methanol from syngas is based on thermal catalysis (TC). However, in this work, light was introduced into the thermal catalytic process, creating a novel thermo-photo catalysis (TPC) for methanol production from syngas over a Cu/Zn/Al catalyst. It was demonstrated that the yield of methanol from the TPC process was 2.8 times that from the TC process at a catalyst temperature of 350 degrees C. Unlike the general recognition that the catalytic performance is mainly dependent on the temperature of the catalyst surface, TPC is also greatly influenced by the reactant temperature. The yield of methanol was enhanced 3.3 times by increasing the reactant temperature from 93 to 260 degrees C at a constant catalyst-surface temperature of 350 degrees C. Furthermore, although Cu+ is the active site for thermal catalysis, Cu++ plays an important role in thermo-photo catalysis. This work provides insights into the synergistic effect of thermal energy and photoenergy in thermo-photo catalytic syngas conversion.
Synergies between Direct Air Capture Technologies and Solar Thermochemical Cycles in the Production of Methanol

Enric Prats-Salvado,Nathalie Monnerie,Christian Sattler

DOI: https://doi.org/10.3390/en14164818

IF: 3.2

2021-08-07

Energies

Abstract:Methanol is an example of a valuable chemical that can be produced from water and carbon dioxide through a chemical process that is fully powered by concentrated solar thermal energy and involves three steps: direct air capture (DAC), thermochemical splitting and methanol synthesis. In the present work, we consider the whole value chain from the harvesting of raw materials to the final product. We also identify synergies between the aforementioned steps and collect them in five possible scenarios aimed to reduce the specific energy consumption. To assess the scenarios, we combined data from low and high temperature DAC with an Aspen Plus® model of a plant that includes water and carbon dioxide splitting units via thermochemical cycles (TCC), CO/CO2 separation, storage and methanol synthesis. We paid special attention to the energy required for the generation of low oxygen partial pressures in the reduction step of the TCC, as well as the overall water consumption. Results show that suggested synergies, in particular, co-generation, are effective and can lead to solar-to-fuel efficiencies up to 10.2% (compared to the 8.8% baseline). In addition, we appoint vacuum as the most adequate strategy for obtaining low oxygen partial pressures.

energy & fuels

Direct Solar Thermochemical Conversion of Methanol into Syngas Via Nanocatalysts at Lower Temperatures

Enhancing Low-Temperature Methane Conversion on Zn/ZSM-5 in the Presence of Methanol by Regulating the Methanol-to-aromatics Reaction Pathway

Direct Solar-Thermal Scalable-Decomposition of Methanol Flowing Through a Nanoparticle-Packed Bed Reactor under Outdoor Environment

Efficient Conversion of Methane to Aromatics in the Presence of Methanol at Low Temperature

Solar-driven low-temperature reforming of methanol into hydrogen via synergetic photo- and thermocatalysis

Selective light absorber-assisted single nickel atom catalysts for ambient sunlight-driven CO 2 methanation

Solar-powered Methanol Synthesis from CO2 Hydrogenation with High Conversion and Selectivity

Near‐Unity Photothermal CO2 Hydrogenation to Methanol based on a Molecule/Nanocarbon Hybrid Catalyst

Ambient sunlight-driven photothermal methanol dehydrogenation for syngas production with 32.9 % solar-to-hydrogen conversion efficiency

High efficient sunlight-driven CO2 hydrogenation to methanol over NiZn intermetallic catalysts under atmospheric pressure

Photocatalytic and Thermocatalytic Conversion of Methane

Photocatalytic Hydrogenation of Carbon Dioxide with High Selectivity to Methanol at Atmospheric Pressure

Supercharged CO2 Photothermal catalytic Methanation: High Conversion, Rate, and Selectivity.

Highly efficient solar-driven CO2-to-fuel conversion assisted by CH4 over NiCo-ZIF derived catalysts

Boosting photo-thermal co-catalysis CO2 methanation by tuning interface electron transfer via Mott-Schottky heterojunction effect

Efficient solar-driven: Photothermal catalytic reduction of atmospheric CO2 at the gas-solid interface by CuTCPP/MXene/TiO2

Supra‐Photothermal CO2 Methanation Over Greenhouse‐Like Plasmonic Superstructures of Ultra‐Small Cobalt Nanoparticles

Solar-Energy-Mediated Methane Conversion

Solar Photocatalytic Oxidation of Methane to Methanol with Water over RuOx/ZnO/CeO2 Nanorods

Thermo–Photo Catalysis for Methanol Synthesis from Syngas

Synergies between Direct Air Capture Technologies and Solar Thermochemical Cycles in the Production of Methanol