A New Approach to the Design of a DELTA Robot with a Desired Workspace

LiuXin-Jun,WangJinsong,OhKun-Ku,KimJongwon

2004-01-01

Abstract:In this paper, a new design method considering a desired workspace and swing range of spherical joints of a DELTA robot is presented. The design is based on a new concept, which is the maximum insc...

What problem does this paper attempt to address?

A New Approach to the Design of a DELTA Robot with a Desired Workspace

Xin-Jun Liu,Jinsong Wang,Kun-Ku Oh,Jongwon Kim

DOI: https://doi.org/10.1023/B:JINT.0000015403.67717.68

2004-01-01

Abstract:In this paper, a new design method considering a desired workspace and swing range of spherical joints of a DELTA robot is presented. The design is based on a new concept, which is the maximum inscribed workspace proposed in this paper. Firstly, the geometric description of the workspace for a DELTA robot is discussed, especially, the concept of the maximum inscribed workspace for the robot is proposed. The inscribed radius of the workspace on a workspace section is illustrated. As an applying example, a design result of the DELTA robot with a given workspace is presented and the reasonability is checked with the conditioning index. The results of the paper are very useful for the design and application of the parallel robot.
Workspace Atlases for the Computer Aided Design of the Delta Robot

XJ Liu,J Wang,H Zheng

DOI: https://doi.org/10.1243/095440603322310413

2003-01-01

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

Abstract:Parallel robots lead to complex kinematics equations, so determination of their workspaces is a challenging issue. The workspace of a robot is not fully characterized by its volume alone; the workspace shape is an important aspect as well. In this paper, the geometric determination of the workspace for Delta robots is presented. The workspace (workspace volume and workspace shape) for the robots is studied systematically in ‘the physical model of the solution space’, which is a useful tool to express relationships between the performance criteria and all link lengths of one type of robotic mechanism. Performance atlases of the workspace volume for the robots are plotted in the physical model of the solution space. The characteristics of the distribution of the workspace shapes in the physical model of the solution space are presented as well. The physical model of the solution space presents a new method for the computer aided design (CAD) of robotic mechanisms. The results are very useful for obtaining the optimum design of robotic mechanisms.
Geometric Description of the Maximum Inscribed Workspace for a DELTA Parallel Robot

张立杰,刘辛军

DOI: https://doi.org/10.3969/j.issn.1006-2343.2002.01.004

2002-01-01

Abstract:In this paper, the geometric description of the workspace for a DELTA parallel mechanism is dicussed. Espe cially, the conception of the maximum inscribed workspace for the mechanism is proposed, and the inscribed radius of the workspace on a workspace section is presented. The shape of the workspace is given by an example
Research on Full Reachable Workspace of the Parallel 6-DOF Platform

Jia CHENG,Xuan-yin WANG,Qiang LI,Le-bing WU

DOI: https://doi.org/10.3321/j.issn:1000-1328.2007.02.029

2007-01-01

Abstract:The full reachable workspace of the parallel 6-DOF simulating platform was researched.At first,Cylinders' changes when the position or poses of the upper plate were changed and the relations between the cylinder's changes and the full reachable workspace were analyzed.Based on the above analyses,a fast six-dimension searching algorithm based on the movements' characters was presented.In the algorithm,the searching is confined to the space which is close to the external contour of the full workspace and the searching start point of the external contour is quickly found by deducing the expressions of the cylinders' displacements when the polar angle is equal to zero,by using both of the above methods,the searching space is decreased,the searching efficiency is improved,and the enveloping surface of the upper plate's limit position is quickly searched out.Then take the 6-DOF platform in Zhejiang University for example,the full reachable workspace was searched out and plotted.At last,the relations between the full reachable workspace and the structure parameters were simulated,and the simulating results provided the references for the design of the platform.
The Workspace Analysis of the Delta Robot Using a Cross-Section Diagram Based on Zero Platform

Jun-Ho Hong,Ji-Ho Lim,Euntaek Lee,Dongwon Shin

DOI: https://doi.org/10.3390/machines12080583

IF: 2.899

2024-08-24

Machines

Abstract:This paper introduces a new concept of a zero-platform delta robot with three key parameters affecting the shape and size of the workspace. This concept is applied to directly bring the torus configuration into the links of the robot and shows its usefulness in configuring and generating the workspace conveniently. Analyzing the workspace of parallel robots, such as delta robots, requires extensive computation due to the constraints between the links, typically requiring complex equations or numerical methods. This paper proposes a new method for quickly estimating the shape and size of the workspace using a cross-section diagram based on a geometrical analysis of the zero-platform delta robot. The shape and size of the workspace can be rapidly estimated because the intersection of three cross-section diagrams needs only the torus's 2D operation. Comparing the workspace between the cross-section diagram and the 3D CAD software, this paper shows that the cross-section diagram can analyze the shape and size of the workspace quickly and give a more geometrical understanding of the workspace.

engineering, mechanical, electrical & electronic
Workspace Analysis of a Novel 5-SPS-UPU Parallel Robot Manipulator.

Bingshan Jiang,Lingyu Kong,Shiqiang Zhu,Hairong Fang,Guanyu Huang,Jianjun Gu

DOI: https://doi.org/10.1109/robio55434.2022.10011949

2022-01-01

Abstract:The purpose of the paper is to determine the importance of workspace and the relationship between workspace and geometry for the optimal design in parallel robot. In this paper, a new type of parallel robot is proposed, which can generate three degrees of freedom translation and two degrees of freedom rotation. The kinematics equations and mathematical model of 5-SPS-UPU parallel robot are derived. The inverse kinematics matrix and Jacobian matrix are derived by coordinate transformation theory and differential method. Using this software, the workspace of the new robot is analyzed by using boundary search method. The changes of robot attitude and position workspace are analyzed numerically. The analysis results show that the robot described in this paper has a large effective workspace and can be widely used in the field of industrial robots.
Integrated Conceptual Mechatronic Design of a Delta Robot

Rogelio de Jesús Portillo-Vélez,Iván Andrés Burgos-Castro,José Alejandro Vásquez-Santacruz,Luis Felipe Marín-Urías

DOI: https://doi.org/10.3390/machines10030186

IF: 2.899

2022-03-04

Machines

Abstract:In this paper, a conceptual design of a Delta robot is developed by means of a mechatronic design methodology. A fully integrated conceptual design, clarifying the recurrence of the conceptual design process using black-box/white-box analysis, is presented using the Model Based Systems Engineering (MBSE) paradigm and the SysML language as the formal modeling tool. Multiple designs proposals are then evaluated by the non-linear Choquet integral in order to choose the most appropriate according to a multicriteria requirement. For a preliminary conceptual design, structural parameters for the Delta robot are determined by defining and solving a nonlinear constrained optimization problem, which considers the kinematic model of the robot maximizing its workspace. Both the decision making and the optimization problem are integrated and automated into a common software framework for the design process, by using a standard genetic algorithm and Monte Carlo method to set the optimized conceptual design to be rendered in Computer Aided Design (CAD) software and in a physical prototype, satisfying the technical specifications.

engineering, mechanical, electrical & electronic
Numerical workspace optimization for a 3-DOF delta parallel robot on constrained geometric solid models

Zhenhua Jiang,Dongdong Liu,Yu Wang

DOI: https://doi.org/10.1177/09544062241245791

2024-04-30

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. For the workspace optimization of Delta Parallel Robot (DPR), this paper employs Geometric Modeling Kernel (GMK) to construct DPR's solid workspace model constrained by two categories of angles with non-toroidal boundaries. Leveraging slicing and interpolating techniques, the maximal inscribed regular space within the DPR's workspace is obtained in conjunction with numerical optimization methods. With the objective of maximizing effective volume utilization (the volume ratio between the prescribed regular space to the DPR's workspace) and a prescribed regular space dimension, the Hook-Jeeves direct search method is coupled with the Interior-Point method to attain the optimal geometric DPR parameters on the constrained solid model of workspace. The effectiveness of the algorithm is validated through a design case. This numerical optimization methodology possesses generality, intuitiveness, precision, and high efficiency, theoretically applicable to the workspace optimization for other parallel mechanisms.

engineering, mechanical
Designing a Novel Three-Degree-of-Freedom Parallel Robot Based on Workspace

Jianxun Fu,Feng Gao

DOI: https://doi.org/10.5772/62100

IF: 1.714

2016-01-01

International Journal of Advanced Robotic Systems

Abstract:This paper presents a novel three-degree-of-freedom (3-DOF) parallel manipulator and introduces its mechanical structure. Analytical solutions of the forward kinematics have been worked out, and all configurations of this robot are graphically displayed. On the basis of several special positions in the kinematics, a task workspace is prescribed to find the smallest feasible dimensional parameters of the robot. An algorithm describing this method is also introduced. This method can easily find appropriate parameters that can size a robot having the smallest workspace enclosing a predefined task workspace. This improves the design efficiency and ensures that the robot has a small mechanical size possessing a large workspace volume and, in terms of dimension design, meets the lightweight-design requirements. With examples illustrating the design results, we further introduce a design stability in dextoensure that the robot remains a safe distance from the boundary of its actual workspace. One prototype of the robot has already been developed.
A Delta-derived mechanism and its scale design based on working space analysis

Jia-yu LI,Hui-ping SHEN,Qin-mei MENG,Jia-ming DENG,Zhen ZHANG

DOI: https://doi.org/10.13841/j.cnki.jxsj.2018.07.016

2018-01-01

Abstract:According to the theory and method of topological structure design of parallel mechanism based on the POC (Position and Orientation Characteristics) equation, a kind of Delta-derived mechanism 2-R//R//P (4 R) //R茌1-RSS (Delta-CU) is presented, which has proved that it can achieve three translations output. Besides, the equation of inverse positional solution is derived. Furthermore, with regard to the size relations among the radius difference (R-r) of dynamic and static platform, the driving arm (l1) and driven arm (l2), three situations are analyzed, and the optimal matching relationship between (R-r), l1 and l2 is obtained based on the maximum workspace. The Delta-CU mechanism has such advantages as simple structure, easy assembly and maintenance, etc., which serves as an alternative to the Delta mechanism. This paper lays a foundation for the size optimization, prototype design and dynamic analysis of the Delta-CU mechanism.
Multi-Criteria Design Optimization of Delta Robot with Four Degrees of Freedom

K.G. Erastova,P.A. Laryushkin

DOI: https://doi.org/10.18698/0536-1044-2022-1-10-19

2022-01-01

Abstract:A delta robot with three degrees of freedom, having been well studied over the past 40 years, is one of the most popular parallel mechanisms. Nowadays, an urgent task is to study the properties of various modifications of this mechanism. The article considers a delta robot with four degrees of freedom, in which one of the kinematic chains with a parallelogram is divided into two, allowing the output link to have an additional rotational degree of freedom. To maximize the working area and minimize the cost of modification the optimization of the robot design was performed. The problem of maximizing a cubic workspace has been solved.
Dexterous Workspace Analysis of Industrial Robot for Machining Based on Service Sphere

Zhenya He,Junming Wang,Xianmin Zhang,Guojian Huang,Mingjing Song,Jianzhong Fu

DOI: https://doi.org/10.1109/robio54168.2021.9739310

2021-01-01

Abstract:This paper presents a new method of dexterity analysis for machining workspace of industrial robots based on service sphere. Firstly, the definition of the service sphere for industrial robots was introduced, and then a new expression method based on service sphere using the attitude angles was presented to describe the dexterity index for machining workspace of industrial robots. Secondly, the simulation experiments were carried out on a 6-DOF serial robot to verify the feasibility of the presented method. The results show that, for an ABB IRB 120 robot, the suitable machining region was found in the cuboid area where x ranges from 150mm to 300mm, y ranges from -150mm to 150mm, with z ranges from 360mm to 500mm and from 450mm to 630mm, in order to meet the need of 3-axis vertical machining and multi-axis machining respectively. It can be seen that the different demand of machining process influences the position and size of dexterous machining workspace. Therefore, the expression method presented in this paper could be used to analyze the dexterous workspace for machining robots, and provide the basis for determining the mounting positions of workpieces.
Dexterity distribution design for attitude adjustment of multi-joint robotics based on singularity-free workspace decomposition

Jinghua Xu,Mingyu Gao,Xueqing Feng,Zhengxin Tu,Shuyou Zhang,Jianrong Tan,Li Tu,Rongqing Yao

DOI: https://doi.org/10.1080/15397734.2022.2162541

2023-01-15

Mechanics Based Design of Structures and Machines

Abstract:This paper presents a dexterity distribution design method for attitude adjustment of multi-joint robotics based on singularity-free workspace decomposition (SWD). The requirement of attitude adjustment for platform is described by time-varying Euler angles, by which the structural prototyping of universal-prismatic-spherical + spherical (UPS + S) parallel robot body can be generated via mechanism concept design. According to Kutzbach-Grubler formula regarding degree of freedom (DOF), the forward kinematics model is built, meanwhile, the reachable posture workspace of the robot can be depicted in 3D space by exploiting tilt-and-torsion method. The Jacobian matrix is extracted to reckon dexterous performance of the mechanism, including condition number, minimum singular value, manipulability and comprehensive evaluation index. The singularity degree within the design domain, from singularity-free to fully singularity, is comparatively ranked in polar coordinates, which constitutes the essence of SWD, the performance spectrum corresponding to the structural parameters can hereby be acquired for larger workspace and smaller singularity. The impedance control errors with parameter perturbation further validate the consistency of the singularity-free attitude from the perspective of dynamics. The physical experiments are carried out to verify the outcomes by virtue of multi-axis pose sensor array. Hence the presented SWD method has important application prospects regarding DOF coupling, especially in medical rehabilitation, industrial robotics, aerospace manufacturing and so forth.
Modelling and Simulation of a 3DOF End Effector for Material Handling with a Delta Robot

Muhizi Musa,JinLiang Li

DOI: https://doi.org/10.1088/1742-6596/2181/1/012024

2022-01-01

Journal of Physics: Conference Series

Abstract:Abstract In order to improve workspace and material handling system of the delta robot, This paper describes a design of an End-effector with 3 degrees of freedom (3DOF) which makes the End-effector more flexible and having sufficient range of working space. This End-effector will be mounted on a delta parallel robot to perform the desired task in handling materials accordingly. The robot is able to pick and place a given material to the right place and positioning as it is desired by the user. The methodology used to design this robot was based on 3 major components which are: Sliding rails which deals with translational motion along horizontal axis, this motion carries the whole system from side to side and is going to play a role of increasing workspace in either assembling line or picking and placing system. Delta robot is in charge of manipulating its end effector in 3 dimensions along (x, y, z - axis) according to the object tracking localization as a human’s arm manipulate the hand. The end effector’s purpose is to perform rotational motion then pick the object and place as the system requires, this performance has advantage of handling materials and positioning respectively. It showed that the proposed system is safe and is feasible for application. The proposed material handling system can minimize the disadvantages of utilizing a delta robot by attachment of the presented end-effector to the delta robot.
Kinematic and singularity analysis of a 4-DOF Delta-type parallel robot

Laryushkin, Pavel,Fomin, Alexey,Antonov, Anton

DOI: https://doi.org/10.1007/s40430-023-04128-7

IF: 2.361

2023-03-25

Journal of the Brazilian Society of Mechanical Sciences and Engineering

Abstract:The research presents a kinematic analysis of a recently proposed Delta-type parallel robot with four degrees of freedom. In contrast to conventional Delta robots, the design of the proposed one allows its output link to rotate about a fixed axis. The article first considers the mobility analysis using screw theory and verifies the motion pattern of the output link. The inverse kinematics follows next and provides the relations used for a subsequent study on workspaces. All performed calculations form a basis for a singularity analysis, which constitutes the largest part of the work. To analyze singular configurations, the paper considers two approaches. The first approach operates with Jacobian matrices; the second one determines closeness to singularities by concerning actuation speeds and efforts. Both methods provide similar results, which confirms the validity of the applied techniques. Next, the paper presents an example of workspace analysis concerning constraints on the actuation efforts. The proposed method gives more accurate results compared with another conventional approach. Finally, the paper considers an example of trajectory planning between two singularity-free areas of the workspace. The developed techniques are used to move between these areas by adjusting the platform orientation.

engineering, mechanical
Multi-objective optimal design of a novel 6-DOF spray-painting robot

Jun Wu,Xiaojian Wang,Binbin Zhang,Tian Huang

DOI: https://doi.org/10.1017/S026357472100031X

IF: 2.7

2021-01-01

Robotica

Abstract:This paper deals with the multi-objective optimal design of a novel 6-degree of freedom (DOF) hybrid spray-painting robot. Its kinematic model is obtained by dividing it into serial and parallel parts. The dynamic equation is formulated by virtual work principle. A performance index for evaluating the compactness of robot is presented. Taking compactness, motion/force transmissibility, and energy consumption as performance indices, the optimal geometric parameters of the robot are selected in the Pareto-optimal set by constructing a comprehensive performance index. This paper is very useful for the development of the spray-painting robot.
Dimensional Synthesis of a 3-DOF Parallel Manipulator

Y Yun,LP Wang,LW Guan

DOI: https://doi.org/10.1109/icsmc.2004.1401039

2004-01-01

Abstract:Kinematics analysis and dimensional synthesis are two important problems of a parallel manipulator. Dimensional synthesis is optimization of the kinematic parameters according to desired workspace or other design requirements. In this paper, the dimensional synthesis of a 3-DOF parallel manipulator, which mimics DELTA robots, is studied considering maximum inscribed workspace and reciprocal of the condition number on the workspace section based on the concept. The kinematic model of the 3-DOF parallel manipulator is given at first. The golden section search is used to search the workspace of the manipulator and mesh the boundary. Then the algorithm for calculating the inscribed workspace and dimensional synthesis considering the inscribed workspace are presented. Thirdly, the distribution of dexterity index on the workspace section and dimensional synthesis considering the reciprocal of condition number is studied. The two dimensional synthesis results are compared at the end of the paper. While the synthesis methodology of the manipulator is studied. It is helpful to improve design efficiency of the 3-DOF parallel manipulator. The quickly design for the manipulator can be performed through the proposed methods of dimensional synthesis.
Controller Design for a Delta Robot Using Lagrangian Multipliers

Fu-Shin Lee,Chen-I Lin

DOI: https://doi.org/10.21203/rs.3.rs-898296/v1

2021-09-23

Abstract:Abstract The novelty of this research is that the study utilizes Lagrangian multipliers for an articulated close-chain robot mechanism as time-varying states to augment an energy-based Lagrangian dynamic model, and the strategy facilitates the system computations while satisfying the forward/inverse dynamics and mechanism constraints simultaneously for the close-chained robot. Then, this article develops a controller based upon the augmented dynamics model for the Delta robot mechanism and drives its moving platform to track prescribed trajectories in space. As a result, the simulation results validate the effectiveness of the augmented system model in undertaking complex dynamics of close-chained robot mechanisms.
A Versatile Co-Design Approach For Dynamic Legged Robots

Traiko Dinev,Carlos Mastalli,Vladimir Ivan,Steve Tonneau,Sethu Vijayakumar

DOI: https://doi.org/10.48550/arXiv.2103.04660

IF: 3.7

2021-03-08

Robotics

Abstract:We present a versatile framework for the computational co-design of legged robots and dynamic maneuvers. Current state-of-the-art approaches are typically based on random sampling or concurrent optimization. We propose a novel bilevel optimization approach that exploits the derivatives of the motion planning sub-problem (i.e., the lower level). These motion-planning derivatives allow us to incorporate arbitrary design constraints and costs in an general-purpose nonlinear program (i.e., the upper level). Our approach allows for the use of any differentiable motion planner in the lower level and also allows for an upper level that captures arbitrary design constraints and costs. It efficiently optimizes the robot's morphology, payload distribution and actuator parameters while considering its full dynamics, joint limits and physical constraints such as friction cones. We demonstrate these capabilities by designing quadruped robots that jump and trot. We show that our method is able to design a more energy-efficient Solo robot for these tasks.
Concept Design Of Novel 2-Dof Parallel Robots With Spatial Kinematic Chains Based On A Heuristic Strategy

Qizhi Meng,Fugui Xie,Xin-Jun Liu

DOI: https://doi.org/10.1109/cyber46603.2019.9066681

2019-01-01

Abstract:In this paper, by reviewing the development process of the landmark parallel mechanisms (PMs) subjectively, a heuristic strategy of parallel robots' concept design is proposed. As an example, inspired by the Delta and its redundant R4 parallel robots, this paper proposes two novel 2-DoF parallel robots with properly-constraint and over-constraint types. The proposed robots with spatial kinematic chains are expected to provide high stiffness and easy assemblage performance. Kinematic issues are investigated, such as the mobility, inverse kinematics, singularity, and workspace.

A New Approach to the Design of a DELTA Robot with a Desired Workspace

A New Approach to the Design of a DELTA Robot with a Desired Workspace

Workspace Atlases for the Computer Aided Design of the Delta Robot

Geometric Description of the Maximum Inscribed Workspace for a DELTA Parallel Robot

Research on Full Reachable Workspace of the Parallel 6-DOF Platform

The Workspace Analysis of the Delta Robot Using a Cross-Section Diagram Based on Zero Platform

Workspace Analysis of a Novel 5-SPS-UPU Parallel Robot Manipulator.

Integrated Conceptual Mechatronic Design of a Delta Robot

Numerical workspace optimization for a 3-DOF delta parallel robot on constrained geometric solid models

Designing a Novel Three-Degree-of-Freedom Parallel Robot Based on Workspace

A Delta-derived mechanism and its scale design based on working space analysis

Multi-Criteria Design Optimization of Delta Robot with Four Degrees of Freedom

Dexterous Workspace Analysis of Industrial Robot for Machining Based on Service Sphere

Dexterity distribution design for attitude adjustment of multi-joint robotics based on singularity-free workspace decomposition

Modelling and Simulation of a 3DOF End Effector for Material Handling with a Delta Robot

Kinematic and singularity analysis of a 4-DOF Delta-type parallel robot

Multi-objective optimal design of a novel 6-DOF spray-painting robot

Dimensional Synthesis of a 3-DOF Parallel Manipulator

Controller Design for a Delta Robot Using Lagrangian Multipliers

A Versatile Co-Design Approach For Dynamic Legged Robots

Concept Design Of Novel 2-Dof Parallel Robots With Spatial Kinematic Chains Based On A Heuristic Strategy