A slotted frustum-shaped 4 × 4 MIMO dielectric resonator antenna with enhanced isolation for 5G Wi-Fi applications
Ravi Chandra,Dileep Kumar Upadhyay
DOI: https://doi.org/10.1080/09205071.2024.2359716
2024-06-01
Journal of Electromagnetic Waves and Applications
Abstract:In this paper, a slotted frustum-shaped 4×4 multiple-input multiple-output (MIMO) dielectric resonator antenna (DRA) is designed and developed for portable 5G Wi-Fi ( 5.15−5.85GHz ) applications. The DRA is excited by HEM11δ and HEM21δ modes. A slotted right-angle frustum-shaped (SRFS) structure of alumina material as a dielectric resonator (DR) is positioned on the ground plane of the FR4 substrate to design a DRA. Based on the designed DRA, a compact ( 2.57λg×2.57λg , where λg is guided wavelength and calculated at a lower cut-off frequency, 5.0GHz , for εf of 4.4 ) 4×4 MIMO antenna with high isolation of greater than 27.13dB (from 5.0 to 6.1GHz ) and 24.3dB (from 6.1 to 6.25GHz ) is proposed. The developed MIMO antenna's measured working frequency ranges from 5.0 to 6.25GHz , with an impedance bandwidth, BWi of 22.22% , peak gain, GP of 5.85dBi and an average peak gain, Gav of 5.25dBi . The calculated MIMO antenna's diversity performance parameters, channel capacity loss (CCLij) , diversity gain (DGij) , envelop correlation coefficient (ECCij) , mean effective gain (MEGi) , total active reflection coefficient (TARC) , and channel capacity (CC) are obtained as <0.17bits/sec/Hz , >9.99dB , <0.0301 , <−6.06dB , <−12.5dB , and <21.6bits/sec/Hz , respectively. The agreement between the simulation and measurement results is found to be remarkably consistent.
engineering, electrical & electronic,physics, applied