Abstract:Particle impaction on a droplet surface directly affects the particle capture by the droplet, and this phenomenon is the basic process of wet scrubbing and wet deposition. The experimental system is established to in-situ observe the behavior of micron particles impacting on the liquid surface. 50–200μm hydrophobic PMMA and PS particles were used. The particles showed two types of motion behavior, namely, submergence and oscillation, after impaction onto the liquid surface. During particle sinking, the advancing contact angle remained constant. The shape of the liquid surface met the Young–Laplace equation under the quasi-static assumption. After the angle of the three-phase line reached the critical value, the liquid surface was closed, and the particle submerged. A small bubble formed, adhering to the particle trailing surface. If the particle velocity decreases to zero before the angle of the three-phase lines reaches the critical value, the particle will reverse the direction of its motion. When the particle moves to the horizontal liquid surface, the movement ceases. Reciprocating oscillation behavior was not observed. During particle reversion, the receding contact angle gradually decreased and then remained unchanged. The large contact angle hysteresis is the main cause of failure observation in rebound motion mode in the experiment. The changing rule of the critical submergence/oscillation velocity with the particle diameter and surface tension coefficient was studied. As the particle diameter increases, the critical submergence/oscillation velocity decreases. As the surface tension coefficient increases, the critical submergence/oscillation velocity increases. The observed critical submergence/oscillation velocity in this experiment demonstrated the accuracy of the proposed model.

Liquid Sheet Formed by a Newtonian Jet Obliquely Impinging on Pro/hydrophobic Surfaces

Simulation of surface tension force using moving particle semi-implicit method

On the Dynamics of Head-on Collision of Sessile Droplets on the Traveling Substrate

Experimental and numerical study of liquid film by jet impingement: Based on contact angle model

Wettability Model for Various-Sized Droplets on Solid Surfaces

Asymmetric Jetting during the Impact of Liquid Drops on Superhydrophobic Concave Surfaces

Experimental investigation of cavity stability for a gas-jet penetrating into a liquid sheet

Experimental and Theoretical Study on the Ceasing Motion of a Droplet Manipulated by Air-Blowing Nozzle

Effects of operating conditions on droplet deposition onto surface of atomization impinging spray

Interaction of liquid films formed by two continuous jets impinging obliquely on a vertical wall

Friction of Droplets Sliding on Microstructured Superhydrophobic Surfaces.

Shedding of water droplets by the dual synthetic jet

Experimental investigation of liquid jet impingement heat transfer at superhydrophobic surfaces

Analysis of Water Droplet Motion on Hydrophobic Surfaces with Different Microstructures

Water jet rebounds on hydrophobic surfaces : a first step to jet micro-fluidics

Droplets on Micro Structured or Patterned Surfaces with Different Roughness Parameters

Droplet dynamics under an impinging air jet

Wetting Behaviours of a Single Droplet on Biomimetic Micro Structured Surfaces

Numerical investigation of droplet impact on a solid superhydrophobic surface

The Shape of Heavy Droplets on Superhydrophobic Surfaces

Impact of Hydrophobic Micron Ellipsoids on Liquid Surfaces.