Abstract:The modeling of flow and heat transfer in porous media systems has always been a challenge, and the extended Darcy transport models are used for macro-level analysis. However, these models are subjected to the limitations depending upon the porous geometry such as pore size, pore type, effective porosity, tortuosity, permeability, and the flow characteristics. The forced convective flow of an incompressible viscous fluid through a channel filled with four different types of porous geometries constructed using the Triply Periodic Minimal Surface (or TPMS) model is presented in this study. Four TPMS lattice shapes, namely Diamond, I-WP, Primitive, and Gyroid, are created with same volume fraction of solid subdomain as 0.68 (or void fraction as 0.32). Using different configurations for the solid subdomain by treating it as (a) solid, (b) fluid, and (c) porous zone, three different classes of porous structures are further generated for each TPMS lattice. The present study is executed with the objective to investigate the effect of shape–morphology, tortuosity, microporosity, and effective porosity on permeability and inertial drag factor. A pore-scale direct numerical simulation approach is performed for the first two types of porous media by solving the Navier–Stokes equations. The specific microporosity is quantitatively induced in the solid subdomain where Darcy–Forchheimer equation is solved, whereas the Navier–Stokes equations are solved for the void subdomain in the third type of porous media. The results reveal that Darcy flow regime exists up to the mean velocity value of U < 0.0025 m/s (Re < 10) for all the cases discussed here, and it deviates at the higher mean velocity. The conductance to the flow shown by Darcy number has the maximum and minimum values for the Primitive Type 2 and I-WP Type 1 cases. The inertial drag coefficient is minimum in Diamond lattice and maximum in Primitive lattice at lower porosity (0.32), while Primitive lattice has minimum and I-WP lattice has maximum value of inertial drag coefficient for higher porosity (~ 1).

Topology Optimisation of a Porous Unit Cell in a Fluid Flow Considering Forchheimer Drag

Theoretical and Experimental Investigation of Flow Rate Characteristics of Sintered Metal Porous Media

Topology Optimization of Hydrodynamic Body Shape for Drag Reduction in Low Reynolds Number Based on Variable Density Method

Topology optimization of surface flows

Pore-scale computational analyses of non-Darcy flow through highly porous structures with various degrees of geometrical complexity

Flow Topology Optimization at High Reynolds Numbers Based on Modified Turbulence Models

Numerical Simulation Of The Drag And Heat-Transfer Characteristics Around And Through A Porous Particle Based On The Lattice Boltzmann Method

Effect of viscous shearing stresses on optimal material designs for flow of fluids through porous media

Prediction of Preferential Fluid Flow in Porous Structures Based on Topological Network Models: Algorithm and Experimental Validation

Topology optimization of fluidic flows on 2-manifolds

Flow Characterization in Triply Periodic Minimal Surface (TPMS)-Based Porous Geometries: Part 1—Hydrodynamics

Topology Optimization of Porous Solid Structures for Heat Transfer and Flow Channels in Reactors with Fluid-Solid Reaction Coupling

Modification to Darcy model for high pressure and high velocity applications and associated mixed finite element formulations

Pore-scale Simulation and Statistical Investigation of Velocity and Drag Force Distribution of Flow Through Randomly-Packed Porous Media under Low and Intermediate Reynolds Numbers

Topology optimization of fluidic pressure-loaded structures and compliant mechanisms using the Darcy method

Numerical Simulation of the Flow Characteristics Around and Through Multiple Porous Particles

Topology Optimization for Steady-State Navier-Stokes Flow Based on Parameterized Level Set Based Method

Analytical simulation of Darcy-Forchheimer nanofluid flow over a curved expanding permeable surface

Performance analysis and multi-objective optimization for tubes partially filled with gradient porous media

Co-effect of Hydrophobicity and Cavities on Flow Characteristics at Microscale

Convective flow optimization inside a lid-driven chamber with a rotating porous cylinder using Darcy–Brinkman–Forchheimer model