Abstract:The high precision positioning can be easily achieved by using real-time kinematic (RTK) and precise point positioning (PPP) or their augmented techniques, such as network RTK (NRTK) and PPP-RTK, even if they also have their own shortfalls. A reference station and datalink are required for RTK or NRTK. Though the PPP technique can provide high accuracy position data, it needs an initialisation time of 10-30 min. The time-relative positioning method estimates the difference between positions at two epochs by means of a single receiver, which can overcome these issues within short period to some degree. The positioning error significantly increases for long-period precise positioning as consequence of the variation of various errors in GNSS (Global Navigation Satellite System) measurements over time. Furthermore, the accuracy of traditional time-relative positioning is very sensitive to the initial positioning error. In order to overcome these issues, an improved time-relative positioning algorithm is proposed in this paper. The improved time-relative positioning method employs PPP model to estimate the parameters of current epoch including position vector, float ionosphere-free (IF) ambiguities, so that these estimated float IF ambiguities are used as a constraint of the base epoch. Thus, the position of the base epoch can be estimated by means of a robust Kalman filter, so that the position of the current epoch with reference to the base epoch can be obtained by differencing the position vectors between the base epoch and the current one. The numerical results obtained during static and dynamic tests show that the proposed positioning algorithm can achieve a positioning accuracy of a few centimetres in one hour. As expected, the positioning accuracy is highly improved by combining GPS, BeiDou and Galileo as a consequence of a higher amount of used satellites and a more uniform geometrical distribution of the satellites themselves. Furthermore, the positioning accuracy achieved by using the positioning algorithm here described is not affected by the initial positioning error, because there is no approximation similar to that of the traditional time-relative positioning. The improved time-relative positioning method can be used to provide long-period high precision positioning by using a single dual-frequency (L1/L2) satellite receiver.

Embedded GPS/BDS Real-time Precise Point Positioning Method

Improving Beidou Point Positioning with Geographic Data

Research and Evaluation of BDS Real-time Wide-area Precise Positioning Service System

Performance Assessment of Real-Time Precise Point Positioning Using BDS PPP-B2b Service Signal

Performance Analysis of Real-Time Precise Point Positioning with GPS and BDS State Space Representation

Performance Evaluation of Real-Time Precise Point Positioning with Both BDS-3 and BDS-2 Observations

A New GPS/BDS precise point positioning Algorithm Based on Helmet Posteriori Method

Network Based Real-Time Precise Point Positioning

Real-Time Precise Point Positioning Method Considering Broadcast Ephemeris Discontinuities

BDS/GPS Dual Systems Positioning Based on the Modified SR-UKF Algorithm

BDS/GPS Dual Systems Positioning Based on the Modified SR-UKF Algorithm.

Real-time Wide-Area Precise Positioning and Precise Timing Service System

Modeling and assessment of multi-frequency GPS/BDS-2/BDS-3 kinematic precise point positioning based on vehicle-borne data

Real-time precise point positioning augmented with single GPS+BDS beacon reference station

Evaluation on Real-Time Dynamic Performance of BDS in PPP, RTK, and INS Tightly Aided Modes

Precise Point Positioning Research Based on BeiDou Navigation Satellite System

An Improved Long-Period Precise Time-Relative Positioning Method Based on RTS Data

Study on range signal evaluation and precise point positioning application of Beidou navigation satellite system (BDS)

GPS-BDS Positioning Research Based on Nonlinear Filter Algorithm

An Improved BDS-3 PPP-B2b Positioning Approach by Estimating Signal in Space Range Errors

Analysis of Static and Dynamic Real-Time Precise Point Positioning and Precision Based on Ssr Correction