Abstract:A strategy of similar elements synergistic substitution was implemented to enhance the amorphous forming ability (AFA), thermal stability, and soft magnetic properties of Fe-Nb-B nanocrystalline alloys. Substitution of B by 2–6 at.% P in a Fe84Nb7B9 alloy increases the AFA and transforms the partially crystallized melt-spun ribbon into a fully amorphous structure. 2–4 at.% P lowers the grain size and enhances the size uniformity and volume fraction of the α-Fe phase in the annealed alloys, thus decreasing coercivity (H c) from 20.0 to 12.8 A/m and increasing saturation magnetic flux density (B s) from 1.50 to 1.57 T, whereas 6 at.% P coarsens the α-Fe grains and reduced the magnetic softness. Subsequent replacement of Nb by 2–3.5 at.% Hf increases the thermal stability of a Fe84Nb7B5P4 amorphous alloy, and further refines the α-Fe grains and improves the structural uniformity of the nanocrystalline alloys, thereby enhancing the soft magnetic properties and enlarging optimum annealing temperature window (ΔT oa). The Fe84Nb3.5Hf3.5B5P4 nanocrystalline alloy with an average grain size of 9 nm exhibits a low H c of 11.2 A/m, high B s of 1.55 T, and wide ΔT oa of 90 K. The mechanism of P and Hf substitutions affecting the structure and magnetic properties of the Fe84(Nb, Hf)7(B, P)9 nanocrystalline alloys was discussed in terms of primary crystallization behavior regulation.

High Bs of FePBCCu Nanocrystalline Alloys with Excellent Soft-Magnetic Properties

High-temperature Magnetic Properties of Fe-based Nanocrystalline Alloy

Ultra-fine microstructure and exceptional low coercivity developed in a high-Bs Fe-Si-B-P alloy by co-alloying Ni, Mo, and Cu

Novel Fe-C-B-P-Cu Nanocrystalline Alloys with Superb Magnetic Properties and Processability

Microstructure and Soft-Magnetic Properties of FeCoPCCu Nanocrystalline Alloys

Soft Magnetic Fe-Si-B-Cu Nanocrystalline Alloys with High Cu Concentrations

Synthesis of Novel FeSiBPCCu Alloys with High Amorphous Forming Ability and Good Soft Magnetic Properties

Fe-P Based Nanocrystalline Alloys with Good Soft-Magnetic Properties Via Nb Microalloying

Design of FeCoSiBPCu Nanocrystalline Alloys with High Bs and Tunable Soft Magnetic Properties

Fe-based nanocrystalline FeBCCu soft magnetic alloys with high magnetic flux density

Recent progress in high Bs Fe-based nanocrystalline soft magnetic alloys

Improving the Amorphous Forming Ability and Magnetic Properties of FeSiBPCu Amorphous and Nanocrystalline Alloys by Utilizing Carbon

Effect of P microalloying on magnetic properties and structure of FeSiBNbCu nanocrystalline alloy

Rapid-annealed FeSiBPCu Nanocrystalline Alloy with High Bs Approaching 1.9 T and Good Bendability

High B-S Fe84-Xsi4b8p4cux(X=0-1.5) Nanocrystalline Alloys With Excellent Magnetic Softness

Exceptionally High Saturation Magnetic Flux Density and Ultra‐low Coercivity Via an Amorphous‐nanocrystalline Transitional Microstructure in a FeCo‐based Alloy

Exceptionally High Saturation Magnetic Flux Density and Ultralow Coercivity Via an Amorphous–Nanocrystalline Transitional Microstructure in an FeCo‐Based Alloy

Improvement of soft magnetic properties of a Fe84Nb7B9 nanocrystalline alloy by synergistic substitution of P and Hf

Soft Magnetic Properties and Microstructure of Fe84−Nb2B14Cu Nanocrystalline Alloys

Excellent Soft Magnetic Properties and Enhanced Glass Forming Ability of Fe-Si-B-C-Cu Nanocrystalline Alloys

Magnetic properties and crystallization behavior of nanocrystalline FeSiBPCuAl alloys