Abstract:To study the effects of focusing distance on the characteristics of copper plasma, a picosecond laser was utilized to ablate a pure copper plate to generate a plasma spectrum. Following numerous experiments on the subject, three significant factors have been determined: lens focal length, pulse energy and the lens-to-sample distance. These factors were employed to analyze the spectral intensity, plasma temperature and electron density in the local thermodynamic equilibrium (LTE) and optically thin condition. Due to the shielding effects of mixed plasma, the strongest spectral intensity can be obtained in the pre-focused case rather than on the focus, no matter how much beam irradiance was employed. The more intensive the beam irradiance is, the more the optimal position is distant from the focal point. Similarly, the evolution of plasma temperature and electron density was shown a peak in the pre-focused case, which is consistent with the trend of spectral intensity. For the case of extremely high irradiance (on the focus), the shielding effects become more apparent and the resultant above three factors decreased sharply. When a longer-focal-length lens was employed, the spectral intensity exhibited an obvious bimodal trend. In the pre-focused case, a longer-focal-length lens is helpful to eliminate the effects of the roughness of the target surface compared with a shorter one. Finally, the assumed LTE was validated by McWhirter relation, plasma relaxation time and diffusion length, and the optically thin condition also validated by spectral intensity ratio. We hope this work could be an important reference for the future design of highly optimized experiments for Calibration-Free Laser-Induced Breakdown Spectroscopy (CF-LIBS).

Two-Dimensional Observation of Single Cathode Spot Copper Vapor in Vacuum Arcs by Laser-Induced Fluorescence

Multiple Spectral Structure of the 578.2-Nm Line for Copper Vapor Laser

Influence of Cataphoresis on Metal Vapor Distribution in High Repetition Rate Pulsed Discharge Metal Vapor Lasers

A Distributed Carbon Cathodic Vacuum Arc

Observation of the Metallic Vapor from a Plasma Focus with a Laser Differential Interferometer

Spatial and Temporal Behaviors of Copper Atoms and Ions in Laser-induced Plasma

Real-time measurement of 2-D density flux distribution of atomic vapor in vacuum chamber by laser fluorescence

The role of double ionization on the generation of doubly charged ions in copper vacuum arcs: insight from particle-in-cell/direct simulation Monte Carlo methods

Dynamics of femtosecond heated warm dense copper with time-resolved L3-edge XANES

A study on surface-temperature measurement by means of a vacuum-arc cathode under different current conditions

Simulation of cathode spot crater formation and development on CuCr alloy in vacuum arc

The motion and distribution characteristics of cathode spot and its influence on plasma parameters

Adding high time resolution to charge-state-specific ion energy measurements for pulsed copper vacuum arc plasmas

Study on microspot splitting characteristics in cathode spot motion of vacuum arc

Spatially and temporally resolved spectral emission of laser-induced plasmas confined by cylindrical cavities

Role of focusing distance in picosecond laser-induced Cu plasma spectra

Observation of the Metallic Vapor from a Plasma Focus

Cavitation and charge separation in laser-produced copper and carbon plasma in transverse magnetic field

A Novel Method to Generate Multicomponent Metal Ions by Anodic and Cathodic Vacuum Arc Plasmas with Pure Electrodes

Optical Diagnostics of Vacuum Arc in the process of DC Interruption

Electron Density Measurement Via Dual-Angle Thomson Scattering Diagnosis