Abstract:Failure response of the modern high strength steel grades shows a diverse pattern compared to the conventional highly ductile steels. In automotive sheet forming applications of the high strength steels, fracture could be observed prior to necking or the post necking deformation is very limited. The differences in the underlying damage mechanisms contribute to the different ways of damage development and the interaction of damage with plastic localization and strain hardening creates various failure patterns. Therefore, it is critical to clearly identify the phase for damage initiation and understand the relation between plastic localization, damage and fracture, as these patterns significantly influence the safety assessment in the forming process of steels. Inverse modelling approaches are being used to bridge the gap between experiments and numerical simulations. However, this technique shows significant discrepancies when strain heterogeneity is experienced, especially since the determination of the material parameters is based on comparison on a global scale with force and elongation measurements. An iterative finite element model update (FEMU) procedure integrated with optical full field measurement technique was executed which extended the possibilities to identify the material ductile damage and fracture behavior on a local level with significantly higher accuracy. To identify the material plastic and damage behavior of the automotive dual phase steel (DP-K1000) under study, experiments are conducted on dog-bone, notched tensile, central hole and shear specimens at various strain rates. Full field deformation data was obtained by digital image correlation (DIC). A vigorous and general framework for the inverse identification of the strain hardening behavior up to fracture of the automotive high strength steel was studied. A hybrid damage mechanics model (extended Modified Bai-Wierzbicki) that combines a phenomenological criterion for damage initiation related to the microstructure degradation of materials and a continuum damage mechanics based damage evolution law for progressive damage accumulation till final fracture is employed using a VUMAT in the finite element (FE) scheme. To exclude the convergence (plastic instability) problems, a displacement driven finite element simulation was used while minimizing the discrepancy between the experimental and numerical surface strain fields and force values. A visual mapping procedure was adopted to realize identical reference frames and therefore identical peripheries for the specimen in DIC and FE model. This mapping includes a transformation and interpolation function from FE results to the DIC datum points. Successful identification of the material parameters was achieved based on a combined Gauss-Newton and Levenberg-Marquardt algorithm which require the evaluation of the gradient of the objective function to update the unknown parameters in an appropriate direction. The optimization problem of the inverse modelling in the current work was described by a cost function based on the least square norm of the differences of the surface strain fields. Overall cost function formulation is not dependent on the experimental or finite element meshes and includes rigid body motions. The residual was minimized at once for all the displacements by Gauss-Newton scheme in space-time, which is defined by spatial domain and temporal domain. The optimization of the constitutive parameters was directly achieved by minimizing this image residual in an iterative manner. The adopted methodology helped in determining macroscopic crack initiation instant and location from experiments. Local variables such as equivalent plastic strain, stress triaxiality and Lode angle parameter were evaluated from the critical element for the determination of the damage initiation locus which was then fitted by a non-linear least squares method with a trust-region algorithm in Matlab. The identified damage initiation locus and plastic localization phenomena served as an evaluation criteria for the formability of the dual phase automotive steel.

Plastic damage evolution in structural steel and its non-destructive evaluation

A Deformation History-Based Approach for Ultra-Low Cycle Fatigue Damage Evaluation of Steel Structures

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

A Proposal on Ultra-Low Cycle Fatigue Damage Evaluation of Structural Steels

A Study on Influence of Plastic Deformation on the Global Conductivity and Permeability of Carbon Steel

Assessment of Plastic Damage in High Strength Structural Steel Using Electromagnetic Technique

Plastic evolution behavior of H340LAD_Z steel by an optical method

Investigation on Characteristics of Tensile Damage and Microstructure Evolution of Steel AISI 316L by Nonlinear Ultrasonic Lamb Wave

Evaluation of Plastic Deformation and Characterization of Electromagnetic Properties Using Pulsed Eddy Current Testing Method

Revealing plastic localization and ductile damage initiation features with integrated DIC and FEM

In-situ EBSD investigation of plastic damage in a 316 austenitic stainless steel and its molecular dynamics (MD) simulations

Evaluation of Plastic Deformation in an Austenitic Stainless Steel based on Nonlinear ECT Method

Plasticity, localization, and damage in ferritic-pearlitic steel studied by nanoscale digital image correlation

Investigation of Electromagnetic Properties of 304 Austenitic Stainless Steel with Plastic Deformation and Fatigue Damage and Microstructure Analysis

Experimental and Numerical Investigation of Ductile Fracture of Carbon Steel Structural Components

Damage Assessment in Q690 High Strength Structural Steel Using Nonlinear Lamb Waves

Experimental analysis of strain path dependent ductile damage mechanics and forming limits

Quantitative Nondestructive Evaluation of Plastic Deformation in Carbon Steel Based on Electromagnetic Methods

Heterogeneous local plastic deformation of interstitial free steel revealed using in-situ tensile testing and high angular resolution electron backscatter diffraction

Evaluation of plastic damage for metallic materials under tensile load using nonlinear longitudinal waves

A Comparative Study on Plastic Damage Characterization of Metallic and Organic Materials Based on Nonlinear Ultrasonic Technique