Abstract:Thermal-mechanical coupling damage is an important factor leading to instability and failure of rock mass engineering. The constitutive relation and damage evolution of rock-like materials under high strain rate is crucial parameters for the design of underground rock mass structures, and is also an essential foundation for the analysis of instability phenomena in rock mass engineering. In this paper, a series of physical properties, static, and dynamic mechanical tests were carried out on Changsha sandstone after different high temperature treatments (ranging from 25 °C to 800 °C). Results indicate that thermal treatment effectively weakens the sandstone specimens. Under dynamic loading, the rock shows obvious strain rate effect, and the stress-strain curve changes from brittleness to viscoelasticity with the increase of temperature. Based on statistical damage theory and Weibull distribution, combining the analysis of the change laws of stress-strain curves of sandstone with temperature, a damage constitutive model that can reflect the variation in dynamic mechanical properties with temperature was proposed, for which the ultrasonic velocity is used to characterize the initial damage of rock caused by high temperature. Thereafter, the rationality of the constitutive model was verified by experiments. Combing damage evolution characteristics and rock failure process recorded by high-speed camera, the dynamic stress-strain relation curves of rock under different high temperature are divided into four stages, and the damage evolution process of rock under thermo-mechanical coupling was also analyzed. Results indicate that the values of thermo-mechanical damage increase exponentially with rock strain, and the damage evolution rate presents a two stage variation of first increase and then decrease. The initial damage stress of rock decreases with increasing temperature, but always maintains a stable percentage compared with the peak stress of the rock. Although the damage value at the peak point of stress increases with the increase of the temperature, it did not reach the maximum value of 1, which indicates that the rock damage continues to increase in the post peak loading stage. The findings of this paper can provide guidance for the macroscopic mechanical damage of rock under high temperatures and dynamic loading.

Dual-damage Constitutive Model to Define Thermal Damage in Rock

Thermal Damage Constitutive Model for Rock Considering Damage Threshold and Residual Strength

An Improved Statistical Damage Constitutive Model for Rock Considering the Temperature Effect

Statistical thermal damage constitutive model of rocks based on Weibull distribution

A Thermo-Mechanical Damage Constitutive Model for Deep Rock Considering Brittleness-Ductility Transition Characteristics

A Novel Time-Dependent Damage Constitutive Model for Hard Rock Materials

An elastic-viscoplastic damage constitutive model for soft rock and Applications

Thermo-mechanical coupling damage constitutive model of rock based on the Hoek–Brown strength criterion

Strain-softening composite damage model of rock under thermal environment

A Time-Dependent Damage Constitutive Model for Brittle Rock Materials Based on Subcritical Damage Theory

An improved damage constitutive model for pre-heated rocks under uniaxial compression considering the initial compaction effect and residual strength

A thermodynamic damage model for 3D stress-induced mechanical characteristics and brittle–ductile transition of rock

A statistical thermal damage constitutive model for rock considering characteristics of the void compaction stage based on normal distribution

A MICROMECHANICAL MODEL FOR DAMAGE AND THERMAL CONDUCTIVITY OF BRITTLE ROCKS

Mechanical Behaviors and Damage Constitutive Model of Thermally Treated Sandstone under Impact Loading

Micromechanical Analysis of Anisotropic Damage and Its Influence on Effective Thermal Conductivity in Brittle Rocks

A New Thermo-Mechanical Coupled DEM Model with Non-Spherical Grains for Thermally Induced Damage of Rocks

Study on Coupled Thermal-Mechanical-damage Model in Rock Failure Process

A statistical damage constitutive model for softening behavior of rocks

Particle Simulation of Thermally-Induced Rock Damage with Consideration of Temperature-Dependent Elastic Modulus and Strength

Numerical Analysis of Degradation Characteristics for Heterogeneous Rock under Coupled Thermomechanical Conditions