Abstract:Because of the rather low melt strength, poor processability, and brittleness, polylactide (PLA) has yet to fulfill its promise as an advanced biobased and biodegradable film to replace fossil-based polymer films. In this work, through the grafting of maleic anhydride (MA) on PLA chains, and then based on epoxy-anhydride chemistry and Zn 2+ -catalyzed transesterification exchange, PLA covalent adaptive networks (CANs) with bio-based epoxidized soybean oil (ESO) as dynamic crosslinks are in situ constructed in a twin-screw extruder, which can be scaled up for industrial production. The ionic dipole interaction between Zn 2+ and MA weakens the complexation of Zn 2+ with the ester groups on PLA chains, maintaining the thermal stability of PLA CANs. PLA CANs show strain-hardening behavior under extensional flow, indicating enhanced melt strength. The combination of accelerated exchange of dynamic covalent bonds and decoupled ionic dipole interaction by elevated temperature and mechanical activation prompts the macroscopic flow, providing rapid re-processibility for PLA CANs. Thus, PLA CANs can be stably processed by extrusion film blowing, and a high blow-up ratio of 3.71 is reached. Interestingly, the flexible crosslinked network that is highly elastically stretched during film blowing allows the film to exhibit unexpectedly enhanced ductility in both take-up direction (MD) and transverse direction (TD), and the film shows elongation at break of 132.1% in MD and 111.0% in TD at an ESO content of 6.42 wt%. Furthermore, PLA CANs film presents lower environmental impacts than petroleum-based plastic film in terms of low CO 2 emissions, low fossil resource scarcity, and potential to biodegrade. Such a strategy combining enhanced melt strength and toughness enabled by PLA CANs with ESO as dynamic crosslinks will open up a new avenue toward advanced PLA film in response to severe plastic film pollution.

Structuring Poly (lactic Acid) Film with Excellent Tensile Toughness Through Extrusion Blow Molding

Ductile and biodegradable poly (lactic acid) matrix film with layered structure

Blowing Tough Polylactide Film Enabled by in Situ Construction of Covalent Adaptive Networks with Epoxidized Soybean Oil as Dynamic Crosslinks

Extensional Stress-Induced Orientation and Crystallization Can Regulate the Balance of Toughness and Stiffness of Polylactide Films: Interplay of Oriented Amorphous Chains and Crystallites

Blown film stability for low, medium, and high molecular weight polylactic acid and their tensile properties

Integration of Stiffness, Ductility, Heat Resistance, and Transparency for Polylactide Films by Manipulation of Amorphous Chain Networks and Oriented Nanocrystals

Simultaneously Improving Stiffness, Toughness, and Heat Deflection Resistance of Polylactide Using the Strategy of Orientation Crystallization Amplified by Interfacial Interactions

Effect of Mixing Poly(lactic Acid) with Glycidyl Methacrylate Grafted Poly(ethylene Octene) on Optical and Mechanical Properties of the Blown Films

Transparent, Heat-Resistant, Ductile, and Self-Reinforced Polylactide through Simultaneous Formation of Nanocrystals and an Oriented Amorphous Phase

Isotropically small crystalline lamellae induced by high biaxial-stretching rate as a key microstructure for super-tough polylactide film

Structures and Properties of Blown Moulding LLDPE Films

Blown film extrusion of poly(lactic)acid/poly(3‐hydroxybutyrate‐4‐hydroxybutyrate) blends for improved toughness and processability

Highly Toughened and Heat-Resistant Poly(lactic acid) with Balanced Strength Using an Unsaturated Liquid Crystalline Polyester via Dynamic Vulcanization

The Structure and Properties Research on Poly (Lactide-Co-trimethylene Carbonate) Film Prepared by Blow Molding

Enhancing Tensile Strength and Toughness Via Moderate Orientation of Amorphous Molecular Chains in Biobased Biodegradable Poly(lactic Acid)

Enhanced Impact Resistance, Oxygen Barrier, and Thermal Dimensional Stability of Biaxially Processed Miscible Poly(Lactic Acid)/Poly(Butylene Succinate) Thin Films

Reactive Processing of Poly(lactic Acid)/poly(ethylene Octene) Blend Film with Tailored Interfacial Intermolecular Entanglement and Toughening Mechanism

Melt stretching and quenching produce low-crystalline biodegradable poly(lactic acid) filled with β-form shish for highly improved mechanical toughness

Super-Toughed PLA Blown Film with Enhanced Gas Barrier Property Available for Packaging and Agricultural Applications

Poly(lactic acid) (PLA) Based Tear Resistant and Biodegradable Flexible Films by Blown Film Extrusion

Super-Robust Polylactide Barrier Films by Building Densely Oriented Lamellae Incorporated with Ductile in Situ Nanofibrils of Poly(butylene Adipate-Co-terephthalate).