Abstract:An experimental study was conducted to evaluate the ductility of reinforced concrete beams longitudinally reinforced with hybrid Fiber Reinforced Polymer (FRP)–steel bars. The specimens were fourteen reinforced concrete beams with and without hybrid reinforcement. The test variables were bar positions, ratio of longitudinal reinforcement, and type of FRP. The beams were loaded until failure using a four-point bending test. The performance of the tested beams was observed using the load–deflection curve obtained from the test. Numerical analysis using the fiber element model was carried out to examine the growth of neutral axis due to the effects of the test variables. The neutral axis curves were then used to estimate the neutral axis angles and displacement indices. The test results showed that the reinforcement position did not significantly affect the flexural capacity of beams with a higher ratio of hybrid reinforcement, but was quite significant in beams with a lower ratio of hybrid reinforcement. It was observed from the test that the flexural capacity of beams with hybrid reinforcement was 15–45% higher than that of beams with conventional steel bars, depending on bar positions and the ratio of longitudinal reinforcement. The ductility of beams with hybrid reinforcement was significantly increased compared to that of beams with FRP, but decreased as the hybrid reinforcement ratio (Af/As) increased. This study also showed that the developed numerical model could predict the flexural behavior of beams with hybrid reinforcement with reasonable accuracy. Based on the test results, parametric analysis, and data obtained from the literature, the use of the neutral axis angle and displacement index value to evaluate the ductility of cross-sections with hybrid reinforcement is proposed.

Flexural capacity and design of hybrid FRP-steel-reinforced concrete beams:

Shear Design Method for Non-Prismatic Concrete Beams Reinforced Using W-FRP

Behavior of Hybrid FRP-Concrete-Steel Tubular Columns: Experimental and Theoretical Studies

Flexural Strength Design of Hybrid FRP-Steel Reinforced Concrete Beams

Flexural property and design method evaluation of BFRP and steel bars hybrid reinforced concrete beams

Finite element analysis of ductility and flexural capacity of FRP and steel bars hybrid reinforced concrete beams

Flexural behavior of concrete beams hybrid-reinforced with glass fiber-reinforced polymer, carbon fiber-reinforced polymer, and steel rebars

Flexural Performances of Pre-Stressed Concrete Piles Reinforced with Hybrid BFRP and Steel Bars

Experimental study of GFRP-concrete hybrid beams

Ductility Estimation for Flexural Concrete Beams Longitudinally Reinforced with Hybrid FRP–Steel Bars

Flexural Behavior of Novel Hybrid Multicell GFRP-concrete Beam

Experimental investigation on the flexural behavior of SFRC beams reinforced with hybrid reinforcement schemes

Experimental research on the flexural behavior of Basalt fiber‐reinforced polymer (BFRP) and steel bars hybrid reinforced concrete beams

GFRP-concrete hybrid beams under flexural loading: Experimental investigation

Experimental study of hybrid FRP reinforced concrete beams

Effect of Fiber Volume Ratio on Flexural Behavior of RC Beam with Novel HFRP Rebar and Steel Rebar

Flexural Behaviour of Hybrid Bar Reinforced Concrete Beams (GFRP Bars with Steel Wires): An Experimental Study

Flexural performance of FRP-SWSSC-steel composite beams: Experimental and analytical investigation

Prediction of Structural Behavior of Continuous Reinforced Concrete Beams with Hybrid CFRP-Steel Bars

Study on the deformation of hybrid BFRP-steel reinforced concrete beams considering crack development

Experimental Investigation of the Flexural Performance of Hybrid (GFRP and STEEL) Reinforced Concrete Beams