Performance Improvement of a Hydrogen-Bromine Flow Battery
Kyu Taek Cho,Adam Z. Weber,Qinggang He,Paul L. Ridgway,Vincent S. Battaglia,Venkat Srinivasan
DOI: https://doi.org/10.1149/ma2012-02/5/392
2012-01-01
Abstract:Redox flow batteries are promising candidates for grid-scale electrical-energy storage and load leveling because they show rapid response times, versatility, scalability, independence of geographical location (unlike pumped hydro or compressed-air technologies) and operate at moderate conditions (unlike flywheels or superconducting magnets). In addition, flow batteries allow for separate optimization of energy and power, flexible charge and discharge rates and depths, and robustness to fluctuations in charge and discharge rates. Nevertheless, there is need for significant improvement in performance, lifetime, safety, and cost to make flow batteries an economically competitive energy storage alternative.(1) An electrochemical redox system capable of meeting these demands is the hydrogen-bromine system. It has highly reversible and kinetically favored electrochemical reactions, soluble chemical species, high current-density operation, and a relatively inexpensive electrolyte. However, the performance can be increased further through optimization of the cell architecture, electrode properties, and electrolyte composition as shown in Figure 1. To implement the optimization in a rational fashion, an in-depth understanding of the coupled mass, heat, and charge transport and electrochemistry in the redox flow cell is crucial. (2) In this study, a finite-element-based multi-physics model of a hydrogen-bromine flow battery coupling mass transport, flow, charge transport, and electrochemical reaction is developed. The calculated cell performance is validated and compared with experimental investigations of a hydrogen-bromine flow battery during charge and discharge for different operating conditions, cell component materials, and designs. The model is used to predict optimum cell designs and determine the critical parameters and performance roadblocks. In addition, the experimental investigation of some of these determined parameters is undergone. The increased understanding that the validated model provides allows for design and material guidelines to be developed and limits of the chemistry explored.