Abstract:It is important to obtain the information on the neutral metallic vapor during the arcing period for a better understanding of vacuum arc interruption process. In this work, the objective is to experimentally study the two dimensional distribution of copper vapor during arcing. A reverse current was injected at specific time points to force the 45 Hz sinusoidal arc current to be extinguished in a short time, avoiding the interference of intensive arc self-radiation. Meanwhile, the plane laser-induced fluorescence (PLIF) using a pulse laser with a central wavelength at 324.8 nm was adopted to excite the metallic vapor, and a iCCD camera recorded the distribution of the vapor from the induced fluorescence. In the experiments, a pair of cup-shaped axial magnetic field (AMF) contacts were used. The material was CuCr50 and the peak amplitude of the arc current was 3 kA. It is found that the peak value of the metallic vapor density occurred at about 8 ms while the current peak occurred approximate 3 ms in advance, and the highest density value can achieve up to 2.3×1020m-3. It is also found that the metallic vapor mainly accumulated on the anode surface under AMF during the arcing period, which became obvious when the current begins to drop.

Two Dimensional Distribution Diagnostic of Copper Vapor in a Vacuum Arc by Laser-induced Fluorescence