Abstract:We performed a combined experimental and theoretical investigation of the oxidation behavior of pure Ni and of the following multi-component Ni-containing alloys with nearly equiatomic compositions: FeNi, CoFeNi, CoCrFeNi, and CoCrFeMnNi. The materials were exposed to air at ambient pressure and at a temperature of 800 degrees C for 150 min, their weight-gain due to oxidation was continuously monitored and the products of oxidation were subsequently characterized by XRD. The most common oxides formed have spinel or halite structure and the materials resistance to oxidation increases as: FeNi < CoFeNi < Ni < CoCrFeMnNi < CoCrFeNi. We found further that the oxidation-resistance of the materials does not correlate linearly with the number of elements present, instead the type of elements impacts significantly the materials susceptibility to oxidative damage. Cr is the element that imparted higher resistance to oxidation while Mn and Fe worsened the materials performance. In order to better understand the mechanisms of oxidation we employed thermodynamic equilibrium calculations and predicted the phase stability of oxides of the elements that are present in the materials, in different ranges of temperature, composition and oxygen activity. Additionally, we determined the phase compositions for the thermodynamically stable oxides at 800 degrees C. The results from the thermodynamic modeling are in good agreement with the experimental finds. The alloys with low resistance to oxidation such as CoFeNi and FeNi, form the Fe3O4 spinel phase which tends to dominate the phase diagram for these materials. The presence of Cr increases the resistance to atomic rearrangement due to slow diffusion in the complex structure of Cr containing spinel phases. This causes the extremely high resistance to oxidation of the CoCrFeNi alloy. The presence of Mn in CoCrFeNi stabilizes the Mn3O4 spinel, which reduces the oxidation-resistance of the alloys due to the highmobility of Mn.

In Situ Xps Studies on the Anti-Oxidation Effects of Nano-Sized Ni-Co-B Amorphous Alloy

Shaped Pt-Ni Nanocrystals with an Ultrathin Pt-enriched Shell Derived from One-Pot Hydrothermal Synthesis As Active Electrocatalysts for Oxygen Reduction

XPS Studies on a Novel Amorphous Ni–Co–W–B Alloy Powder

Xps Studies On Surface Electronic Characteristics Of Ni-B And Ni-P Amorphous Alloy And Its Correlation To Their Catalytic Properties

A Highly Active "Nio-on-au" Surface Architecture for Co Oxidation

Preparation of Amorphous Ni-Co-B Alloys and the Effect of Cobalt on Their Hydrogenation Activity

CO oxidation on Ni-based single-atom alloys surfaces

Synergetic Effect of Surface and Subsurface Ni Species at Pt-Ni Bimetallic Catalysts for Co Oxidation

EXAFS study on ultrafine Ni-Co-B amorphous catalysts

The Effect of Tungsten Additive on the Surface Characteristics of Amorphous Ni–P Alloy

In Situ Full-Field Measurement of Surface Oxidation on Ni-based Alloy Using High Temperature Scanning Probe Microscopy.

Oxidation-Induced Atom Diffusion and Surface Restructuring in Faceted Ternary Pt–Cu–Ni Nanoparticles

A Comparative Study in Structure and Reactivity of “ FeO Xon-Pt ” and “ NiO Xon-Pt ” Catalysts

Nonlinear Oxidation Behavior in Pure Ni and Ni-Containing Entropic Alloys

Preparation of the Ni-B Amorphous Alloys with Variable Boron Content and Its Correlation to the Hydrogenation Activity

One-Step Synthesized Pt-on-NiCo Nanostructures for Oxygen Reduction with High Activity and Long-Term Stability

In-situ XAFS Study on the Crystallization Mechanism of NiB Nano-Amorphous Alloy

Oxidation of amorphous Ni–Zr alloys studied by XPS, UPS, ISS and XRD

Promoted Platinum Catalytic Activity and Thermal Stability with Nano-Scale Cobalt Oxide Coating Via Atomic Layer Deposition

Atomic Structure Evolution of Pt–Co Binary Catalysts: Single Metal Sites versus Intermetallic Nanocrystals