Abstract:Purpose – The purpose of this paper is to propose a new three-phase switched reluctance motor (SRM), and achieve high-torque and low-cost. This new SRM's winding configuration uses the double-layer distributed windings, which is different from the conventional SRM's single tooth coils. Design/methodology/approach – The operating principle of new SRM is analyzed, and the voltage equation and the generated torque are deduced. Finite element method (FEM) and finite element circuit coupled method are utilized to evaluate the new motor's operating performances. The two dimensional (2D) frequency response analysis model is employed in the FEM model. Based on the 2D frequency response analysis model, the magnetic field distribution, self-inductance, and mutual-inductance for the new SRM are analyzed in detail. A co-simulation model using FE analysis package and Matlab-Simulink is proposed to simulate the new SRM drive. The simulated and experimental results verify the new SRM. Findings – For the new SRM with double-layer distributed windings, a co-simulation method is proposed to analyze its characteristics. The new SRM presents lower torque ripple coefficient and generates larger torque than the conventional SRM, with three-wire and standard full bridge power converter, rather than six-wire and asymmetric half-bridge converter for conventional SRM. Originality/value – This paper proposes a new SRM with the double-layer distributed windings driven by a standard full bridge inverter. In order to calculate dynamic characteristics of the new SRM, a co-simulation method using FEM and Simulink is proposed to simulate the new SRM drive, where the power inverter and the current chopping control algorithm are implemented.

A New Type Of In-Wheel Outer Rotor Switched Reluctance Motor Drive Based On Selective Wireless Power Transfer Technology

Power converter for switched reluctance motor with single power switch per phase and dual power supply

Wireless Power Transfer with Additional Third Harmonic: Theoretical Analysis, Design, and Demonstration

Wireless Power Transmission-Based In-Wheel Switched Reluctance Motor Drive System with an X-Type Converter

Design and Optimization of a Modular Wireless Power System Based on Multiple Transmitters and Multiple Receivers Architecture

Split Converter-Fed SRM Drive for Flexible Charging in EV/HEV Applications

A Reconfigurable Resonant Topology of Wireless Power Transfer Systems with Large Coupling Ranges

A Constant Current Wireless Power Transfer Scheme with Asymmetric Loosely Coupled Transformer for Electric Forklift

A Review on Machine Topologies and Control Techniques for Low-Noise Switched Reluctance Motors in Electric Vehicle Applications

An Integrated Wireless Motor System Using Laminated Magnetic Coupler and Commutative-Resonant Control

A Sensorless Drive Strategy for Open-End Winding PMSM with Common DC Voltage Based on Lower Switching Frequency

Wireless Power and Drive Transfer Using Orthogonal Bipolar Couplers and Separately Excited Modulation

Optimal Design and Control of a Decoupled Multi-Frequency Multi-Phase Wireless Switched Reluctance Motor Drive System

Design and Implementation of Novel Rotor Side Brushless Controller with Bidirectional Wireless Power Transmission for Doubly-fed Machine

A Decoupled Multichannel Based Wireless SRM System with Tunable Compensation Network and Multifrequency Pulse Density Control.

Design of Wireless Permanent Magnet Synchronous Motor Drive Based on Magnetic Resonant Coupling

Design of in-wheel permanent magnet synchronous motor with concentrated fractional-slot winding and winding switching technology

A New Switched Reluctance Motor with Distributed Winding

A Novel Bidirectional Wireless Power Transmission System for Doubly-fed Motor

A Resonant Inductor Integrated-Transformer Based Receiver for Wireless Power Transfer Systems

Dual-Band Multi-Receiver Wireless Power Transfer with Reactance Steering Network