Abstract:High entropy alloys (HEAs) holding several principal elements in high concentration have unprecedented combination properties. The design of strong and highly ductile HEAs has attracted extensive attention from researchers in the last decade, such as in mechanisms for inducing different types of phase and nano-sized precipitates. Since some HEAs have low stacking fault energy, nanotwins can form during the plastic deformation process or magnetron sputtering, resulting in enhanced mechanical properties due to the existence of twin boundaries. The addition of twin boundaries is implied to be a promising method in engineering HEAs. Understanding how these twin boundaries affect the mechanical properties of nanotwinned HEAs is the key to designing strong and ductile examples. In this study, we performed a large-scale molecular dynamic simulation to investigate the mechanical properties of HEAs with different twin boundary spacings at various temperatures. The results show that the strength of HEAs at all tested temperatures increases with decreasing twin boundary spacing until a lower critical value of 1.83 nm is reached, which is close to the experimental value (2 nm). The strength of the HEAs at all tested temperatures decreases as the twin boundary spacing is decreased further. The dislocation motion transitions at the critical twin boundary spacing. In the sample with a twin boundary spacing bigger than 1.83 nm, Shockley dislocations tend to intersect the twin boundaries and glide in the hardening modes; on the other hand, Shockley dislocations travel along the direction parallel to the twin boundaries in samples with a twin boundary spacing smaller than 1.83 nm, leading to detwinning and softening in the HEAs. The dislocation motion and entanglement at 1 K are respectively slower and stronger than those at 300 K; the grain boundary activity is more obvious at a higher temperature. A mechanistic theoretical model together with a Hall-Petch relationship is then proposed to consider the coupled twin boundary and temperature effect on the deformation of nanotwinned HEAs.

Interfacial nanophases stabilize nanotwins in high-entropy alloys

Atomistic and Theoretical Insights on Nanoprecipitates-Controlled Strengthening Behavior for Optimum Mechanical Performance in Nanotwinned NiCoCr Alloys

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Size-dependent Formation and Thermal Stability of High-Order Twins in Hierarchical Nanotwinned Metals

Atomistic insights into the synergistic effect of nanotwins and nano-precipitates on the mechanical behavior of superalloys

On the Real-Time Atomistic Deformation of Nano Twinned CrCoFeNi High Entropy Alloy

Enhanced Tensile Properties and Intersecting Nanotwins Formation Mechanism of Ti44Al48Nb8 Alloy Via Electromagnetic Levitation Processing

Microstructure and formation mechanisms of nanotwins in the shear band in a FeCoNiCrMo<sub>0.2</sub> high-entropy alloy

High-Strength Nanotwinned Al Alloys with 9R Phase

Strong and ductile nanoscale Ti-1Fe dual-phase alloy via deformation twinning

Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys

Nano-twinning Induced High Strain Hardening Behavior in a Metastable As-Cast Co30Cr30Fe20Ni20 High Entropy Alloy at Room Temperature

TiZrHfNb refractory high-entropy alloys with twinning-induced plasticity

Anisotropic Mechanical Properties and Deformation Mechanisms of Nanotwinned Ni and Ni Alloys With Extremely Fine Twin Boundary Spacings

Multi-scale annealing twins generate superior ductility in an additively manufactured high-strength medium entropy alloy

Enhancing cryogenic yield strength and ductility of the Al 0.1 CoCrFeNi high-entropy alloy by synergistic effect of nanotwins and dislocations

Atomic Insight into Nanoindentation Response of Nanotwinned FeCoCrNiCu High Entropy Alloys

Homogeneously Introducing More and Thinner Nanotwins by Engineering Annealing Twin Boundaries: A TWIP Steel As an Example

Twinning in Metastable High-Entropy Alloys

Synergistic Enhancement of High Temperature Strength and Ductility with a Novel Γ/ε Dual-Phase Hetero-Nanostructure in NiCoCr-based Alloys

Multi-principal Element Alloys with High-density Nanotwinned 9R Phase