Abstract:High entropy alloys (HEAs) exhibit superior mechanical properties. However, the nanoscratching properties and deformation behaviour of FeCoCrNiAl0.5 HEAs remain unknown at the nanoscale. Here, we investigate the effect of scratching depth on the microstructural and tribological characteristics of an FeCoCrNiAl0.5 HEA using molecular dynamics simulations combined with a physical model. The scratching force increases significantly as the scratching depth increases. In the lower part of the scratching region, there is a clear atomic movement process, with the load generated in the normal direction causing the atoms to shift downwards. Noticeable shear bands are formed in the subsurface area, and they are both small and narrow compared with the pure Ni. The plastic deformation mechanism of the compressed surface is mainly governed by the formation and expansion of stacking faults during the subsurface evolution process. The evolution process of screw dislocations is similar to that of edge dislocations. In addition, the high strength and deformation resistance of FeCoCrNiAl0.5 HEAs are further evaluated by establishing a microstructure-based physical model. The combined effect of the lattice distortion strengthening and dislocation strengthening promotes the high strength of the FeCoCrNiAl0.5 HEA, which is significantly better than the single strengthening mechanism of pure metals. These results accelerate the understanding of the mechanical properties and deformation mechanisms of HEAs.

Research on nano-scratching behavior of TiZrHfBeCu(Ni) high entropy bulk metallic glasses

The role of nano-scale elastic heterogeneity in mechanical and tribological behaviors of a Cu–Zr based metallic glass thin film

Mechanical responses and plastic rheological behavior of Ti–Zr-Hf-Co-Ni-Cu metallic glass thin films deposited with different substrate temperatures during nanoindentation and nanoscratch process

High strain rate sensitivity of hardness in Ti-Zr-Hf-Be-(Cu/Ni) high entropy bulk metallic glasses

Room Temperature Nanoindentation Creep Behavior of TiZrHfBeCu(Ni) High Entropy Bulk Metallic Glasses

Tribological Behavior of an Amorphous Zr20Ti20Cu20Ni20Be20 High-Entropy Alloy Studied Using a Nanoscratch Technique

Tribological properties of Ti40Zr25Ni8Cu9Be18 bulk metallic glasses under different conditions

Atomistic simulation of tribology behaviors of Ti-based FeCoNiTi high entropy alloy coating during nanoscratching

Unraveling the Subsurface Damage and Material Removal Mechanism of Multi-Principal-Element Alloy FeCrNi Coatings During the Scratching Process

Nanoindentation Study on the Room Temperature Creep Characteristics of A Senary Ti16.7zr16.7hf16.7cu16.7ni16.7be16.7 High Entropy Bulk Metallic Glass

Probing the microstructure and deformation mechanism of an FeCoCrNiAl0.5 high entropy alloy during nanoscratching: a combined atomistic and physical model study

Incorporation of ultrafine nanograins in Zr–Cu–Al–Ni–Co bulk metallic glass enabling significantly improved mechanical properties

Enhancing the tribological performance of the TiZrHfCuBe high entropy bulk metallic glass by Sn addition

Effect of Sn Additions on the Damage Tolerance of a ZrCuNiAl Bulk Metallic Glass

Effect of Chemical Composition on the Thermoplastic Formability and Nanoindentation of Ti-Based Bulk Metallic Glasses

Mechanical and tribological properties of Zr–Cu–Ni–Al bulk metallic glasses with dual-phase structure

Nanoscopic tribological characteristics of a cryogenically cycled Zr-based metallic glass

Spectroscopic evaluation of tribologically-induced changes in surface chemistry of Zr-based bulk metallic glass

Nonisothermal Crystallization Kinetics, Fragility and Thermodynamics of Ti20Zr20Cu20Ni20Be20 High Entropy Bulk Metallic Glass

Mechanical and corrosion properties of Ti-Ni-Cu-Zr metallic glass matrix composites

Locating bulk metallic glasses with high fracture toughness: Chemical effects and composition optimization