Abstract:With the high integration of power electronic devices, wireless power transfer (WPT) systems are required to have output characteristics of different specifications that are independent of the load. However, existing methods for realizing dual-output WPT systems have problems such as complex circuits, cumbersome control schemes, low system stability, insufficient system space utilization, and unnecessary cross-coupling. Therefore, in order to solve the above problems, this paper proposes a dual-receiver WPT system with dual constant current (CC) output based on an integrated decoupling coil. In this system, the DD coil is wound vertically in series with the solenoid coil and serves as the first receiving coil to achieve energy transmission in the system. While the solenoid coil is used in the transmitting coil and the second receiving coil, and the coils are perpendicular to each other to achieve natural decoupling. Furthermore, the receiving coils are integrated together on the receiving side ferrite plate. Therefore, there is no cross-coupling interference in the system, which simplifies the system design. Firstly, the natural decoupling characteristics of the magnetic coupler and the coil optimization method are analyzed in detail theoretically. Secondly, a detailed mathematical analysis is performed on the dual CC output characteristics with different specifications that are load-independent and have zero phase angle operation. Again, the zero voltage switching of the inverter can be achieved by changing the compensation component parameters through simulation verification. Finally, a prototype with a rated power of 283 W is constructed for validation purposes. The first receiver delivers a CC output of 3 A, while the second receiver provides a CC output of 4 A, with the DC–DC conversion efficiency reaching a peak of 90.2%. The experimental results confirm the accuracy of the theoretical analysis.

Research and Application of Dual-Load Wireless Power Transmission System

Design and Optimization of a Modular Wireless Power System Based on Multiple Transmitters and Multiple Receivers Architecture

Basic Principles of Point-to-Point Omnidirectional Wireless Power Transfer System

Design and Optimization of a Wireless Power Transfer System with a High Voltage Transfer Ratio

Multi-coil Constant Voltage Output Analysis Based on State Deconstruction for Wireless Power Transfer System

Design and optimization of three dimensional multi-load wireless transfer system

The Efficiency Characteristics Analysis and Optimization of the Magnetic Resonance Wireless Power Transmission to Multiple Receivers

Wireless Power Transmission System for Vehicle Based on Multi-Transmitter Coils Array

Optimal Coil Design and Control Strategy for a High-power and Medium-frequency Wireless Power Transfer System

A Study of Electromagnetic Emission from Two-Coil Wpt System Using Resonant Magnetic Field Coupling

A Dual-Frequency Dual-Load Multirelay Magnetic Coupling Wireless Power Transfer System Using Shared Power Channel

Design of Wireless Power Transfer System Based on LCC-S

An Eight-Coil Wireless Power Transfer Method for Improving the Coupling Tolerance Based on Uniform Magnetic Field

A Dual Constant Current Output Ports WPT System Based on Integrated Coil Decoupling: Analysis, Design, and Verification

Analysis and comparison of the coupled coil structures in dual‐load magnetic coupled resonance wireless power transfer systems

A Dual-Frequency Compatible Wireless Power Transfer System With a Single Transmitter and Multiple Receivers

A Dual-Output AC–AC Converter for Double Transmitter Wireless Power Transfer Systems

Study of a Magnetic Coupling Resonant Wireless Power Transfer System

Wireless Power and Data Transfer Via a Common Inductive Link Using Frequency Division Multiplexing

A Dual-Frequency Three-Dimensional WPT System with Directional Power Transfer Capability at Two Separately Regulated Outputs

Research on Transfer Mechanism and Power Improvement Technology of the SCC-WPT System