Abstract:The electric vehicles are fast developed as the demand for energy conservation and environment protection. The permanent magnet synchronous motors (PMSM) are widely used in electric vehicles because of their high efficiency. However, due to the DC/AC inverter with fixed switching frequency was used to drive the PMSM, high-frequency vibration and acoustic noise were generated in the PMSM. And the frequency at which vibration and noise are generated is related to the switching frequency of the inverter and its integral multiple. Spread spectrum theory shows that the energies of a fixed high-frequency spectrum can be distributed into a wide range of frequencies. Therefore the concentrated energies can be weakened. This theory can be complied with the PMSM control strategy to help to reduce the high-frequency vibration and noise. This paper presents control strategies with changing the switching frequency in order to reduce the vibration and noise of the electric motor. Firstly, four control strategies with different switching frequency: fixed switching frequency (FSF), periodic switching frequency (PSF), random switching frequency (RSF) and hybrid switching frequency (HSF) are modelled and simulated by MATLAB-Simulink. During this process of simulation, the influence from the modulate rate and spread width to the reduction of harmonic amplitude was detailedly analyzed. Secondly, these four control strategies are implemented by the dSPACE MicroAutoBoxIIfor the rapid control prototyping (RCP) test. Thirdly, the vibration and noise tests of the PMSM are complied in the semi-anechoic chamber using software and devices from the LMS Test. Lab. Finally, the results of simulation and tests are compared and analyzed. Based on the simulation and test results, these three optimized control strategies can suppress the high frequency current harmonic amplitude significantly and the noise and vibration reduction difference among them are not apparently. Comprehensive analysis shows that the random and hybrid switching frequency control strategy proves to achieve better the goal of reducing the amplitude of high-frequency vibration and noise.

Research On The Effect Of Pulse Width Modulation Frequency On Radial Force And Vibration Of Switched Reluctance Motor

A Review on Machine Topologies and Control Techniques for Low-Noise Switched Reluctance Motors in Electric Vehicle Applications

Switched Reluctance Motor vibration prediction: From low frequency to high frequency

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

Investigation of Skewing Effects on the Vibration Reduction of Three-Phase Switched Reluctance Motors

Method for Radial Vibration Modelling in Switched Reluctance Motor

XInvestigation of vibration and noise in novel variable flux reluctance machine with reference to switched reluctance machine

Analysis of Vibration Reduction Level in an 8/6 Switched Reluctance Machine by Active Vibration Cancellation

Modeling and analysis of radial electromagnetic force and vibroacoustic behaviour in switched reluctance motors

Smooth Voltage PWM for Vibration and Acoustic Noise Reduction in Switched Reluctance Machines

The Effects and Mechanisms of Periodic-Carrier-Frequency PWM on Vibrations of Multiphase Permanent Magnet Synchronous Motors

Vibration Characteristic Analysis and Comparison of High-Speed Switched Reluctance Motor with Amorphous Alloy Core

A Vibration Reduction Method Based on Smooth Voltage PWM Control of Switched Reluctance Machines

Quantitative Harmonics Performance Evaluation of High-Speed Permanent Magnet Synchronous Machine under Various Synchronous SVPWM Strategies

Vibration and Noise Optimization of Variable-Frequency-Driven SPMSM Used in Compressor Based on Electromagnetic Analysis and Modal Characteristics

The Control Strategy Research on Reduction of High-Frequency Noise and Vibration for Permanent Magnet Synchronous Motor

Research on Radial Vibration Model and Low-Frequency Vibration Suppression Method in PMSM by Injecting Multiple Symmetric Harmonic Currents

An Optimal Periodic Carrier Frequency PWM Scheme for Suppressing High-Frequency Vibrations of Permanent Magnet Synchronous Motors

The Mechanism for Suppressing High-Frequency Vibration of Multiphase Surface Permanent Magnet Motors via PWM Carrier Phase Shifting

Study of Electromagnetic Vibration Suppression for Permanent Magnet Synchronous Motors

Comparative Study of Sideband Electromagnetic Force in Internal and External Rotor PMSMs With SVPWM Technique