Abstract:For robotic polishing of curved surfaces with compliant polishing disc, it is critical to accurately control the tilt angle of the polishing disc and normal contact force between the disc and the workpiece surface simultaneously. As conventional industrial robots lack force control capability, a 3-DOF two-rotational-one-translational (2R1T) force-controlled end-effector based on the 3-PPS parallel mechanism is developed for robotic polishing. During the polishing process, the changes of the tilt angle of the end-effector's moving platform will result in displacement variations of the contact point, owing to the inherent parasitic motion of the end-effector module, the geometry of the disc, and the compliance of the disc. Without proper compensation of the displacement variation, the control accuracy of contact force will be significantly decreased. To tackle this problem, a parametric model is established to predict the contact point variation. A hybrid orientation/force control architecture with compensation of the contact point variation is proposed. Based on the kinematic analysis, orientation control is achieved through a position controller. The force tracking control considering the uncertainty of the environment is achieved through an admittance controller. By introducing the contact point compensation model into the control architecture, the control accuracy of the contact force is significantly improved. The proposed control architecture is evaluated on a macro-mini manipulator consisting of a 6-DOF industrial robot and the 2R1T force-controlled end-effector. The experimental results indicate that the orientation control is accurate and the mean force errors with three different kinds of tilt angle references are reduced by 78.9 , 81.1 and 72.3 compared to the conventional hybrid orientation/force control, respectively, which validate the effectiveness of the proposed control method.

Sensorless Hybrid Normal-Force Controller with Surface Prediction

Hybrid Force Motion Control with Estimated Surface Normal for Manufacturing Applications

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Research and application on force control of industrial robot polishing concave curved surfaces

Hybrid orientation/force control for robotic polishing with a 2R1T force-controlled end-effector

Contact Force Detection and Control for Robotic Polishing Based on Joint Torque Sensors

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Robotic Polishing of Unknown-Model Workpieces With Constant Normal Contact Force Control

A Force Control Method Integrating Human Skills for Complex Surface Finishing

A hybrid control strategy for grinding and polishing robot based on adaptive impedance control

Precise and smooth contact force control for a hybrid mobile robot used in polishing

Hybrid Force/Position Control Method for Robotic Polishing Based on Passive Compliance Structure

Real-Time Deformable-Contact-Aware Model Predictive Control for Force-Modulated Manipulation

Smooth adaptive hybrid impedance control for robotic contact force tracking in dynamic environments

Proxy-Based Sliding Mode Force Control for Compliant Grinding via Diagonal Recurrent Neural Network and Prandtl-Ishlinskii Hysteresis Compensation Model

Robotic Curved Surface Tracking with a Neural Network for Angle Identification and Constant Force Control based on Reinforcement Learning

Model and Control of Hybrid Hard-soft Robots Using Model Predictive Control

Active Tracking of Unknown Surface Using Force Sensing and Control Technique for Robot

Coupled Force–Position Control for Dynamic Contact Force Tracking in Uncertain Environment

The constant force control based on an optimized environmental model for the robotic lapping of curved surface

Tracking and Understanding Unknown Surface with High Speed by Force Sensing and Control for Robot