Abstract:Gait planning is an important basis for the walking of a legged robot. To improve the walking stability of multi-legged robots and to reduce the impact force between the foot and the ground, gait planning strategies are presented for an electrically driven large-load-ratio six-legged robot. First, the configuration and walking gait of the electrically driven large-load-ratio six-legged robot are designed. The higher-stable swing sequences of legs and typical walking modes are respectively obtained. Based on the Denavit–Hartenberg (D–H) method, the analyses of the forward and inverse kinematics are implemented. The mathematical models of the articulated rotation angles are respectively established. In view of the buffer device installed at the end of shin to decrease the impact force between the foot and the ground, an initial lift height of the leg is brought into gait planning when the support phase changes into the transfer phase. The mathematical models of foot trajectories are established. Finally, a prototype of the electrically driven large-load-ratio six-legged robot is developed. The experiments of the prototype are carried out regarding the aspects of the walking speed and surmounting obstacle. Then, the reasonableness of gait planning is verified based on the experimental results. The proposed strategies of gait planning lay the foundation for effectively reducing the foot–ground impact force and can provide a reference for other large-load-ratio multi-legged robots.

Leg Spring Parameters Design for a Six-Legged Walking Robot.

Design and Analysis of the Leg Configuration for Biped Robots’ Spring-like Walking

Leg Configuration Analysis and Prototype Design of Biped Robot Based on Spring Mass Model

Performance Analysis of a Quadruped/Biped Reconfigurable Walking Robot with Parallel Leg Mechanism

A Parallel Actuated Pantograph Leg for High-Speed Locomotion

Spring parameters design to increase the loading capability of a hydraulic quadruped robot

Decoupled Design of Walking Robot Legs

Leg Kinematic Analysis and Prototype Experiments of Walking-Operating Multifunctional Hexapod Robot

A Novel Optimization Design of Dual-Slide Parallel Elastic Actuator for Legged Robots

Bio-inspired Leg Design for a Heavy-Duty Hexapod Robot

Designing Synergistic Walking of a Humanoid Single Leg Driven by Pneumatic Artificial Muscles: an Empirical Study

Morphology Design and Dimensional Synthesis of a Hexapod Robot

Robust and efficient walking with spring-like legs

The generalized spring-loaded inverted pendulum model for analysis of various planar reduced-order models and for optimal robot leg design

Mechanism design and workspace analysis of a hexapod robot

Control of a Quadruped Robot with Bionic Springy Legs in Trotting Gait

Gait Planning Research for an Electrically Driven Large-Load-Ratio Six-Legged Robot

Biomimetic Design and Optimal Swing of a Hexapod Robot Leg

Optimizing energy consumption for legged robot by adapting equilibrium position and stiffness of a parallel torsion spring

Real-time gait planning method for six-legged robots to optimize the performances of terrain adaptability and walking speed

Dynamic compliance of energy-saving legged elastic parallel joints for quadruped robots: design and realization