Abstract:Due to its high thermal efficiency and excellent performance, diesel engine is widely used in non-road mobile machinery, such as engineering and agricultural industry, whose power ranges from a dozen to several hundred kilowatt. However, it also brings amounts of NOx and soot emissions. The problems caused by emissions from non-road diesel engine have widely drawn people’s attention. In recent years, Chinese government has also launched a series of stringent regulations to limit emissions from non-road engines, which can even be equivalent with the US EPA-IV, the most stringent emissions regulation in the whole world. In order to meet those harsh items of emissions regulation, all the engine manufacturers have to upgrade the products in a short time. At the same time, domestic and foreign internal combustion engine (ICE) experts have also carried out a lot of research related to the upgrading of non-road diesel engines. Small and medium power (< 75 kW) non-road diesel engines have innate advantages and wide applications in agricultural production. With the rapid development of after-treatment technology, such as diesel oxidation catalyst (DOC), diesel particulates filter (DPF), selective catalyst reduction (SCR), et al, the path to meet emissions regulations becomes more diverse. However, to meet the non-road stage IV emissions regulation, in addition to exhaust gas recirculation (EGR) and after-treatment technology, basic measurements (in-cylinder purification) must be used to reduce the raw emissions of engine. For the purpose of reducing raw emissions of the non-road heavy-duty diesel engine, experimental study was carried out on the in-cylinder combustion process of the diesel engine in this paper. CHD234V8 common rail direct injection diesel engine was used as a prototype. Through optimization design and matching of the diesel engine combustion chamber structure with fuel injection strategy, the quality of fuel and gas mixture in the cylinder was improved, the proportion of fuel impacting on the combustion chamber wall was optimized, and the maximum in-cylinder pressure was reduced. After the optimization of the diesel engine, the emission performance was greatly improved. Compared with the original engine, the specific fuel consumption at rated power and maximum torque conditions decreased 2.5% and 6.2%, and the smoke emission decreased 71.4% and 67.9%, respectively. CO, (HC+NOx), and particulate matters (PM) decreased 33.9%, 11.8%, and 73%, respectively. Emission performance of CHD234V8 diesel engine met the non-road stage III emissions regulation after optimization.

Modeling and optimization of a light-duty diesel engine at high altitude with a support vector machine and a genetic algorithm

Investigation of an efficient model-based fuel economy optimization methodology for diesel engines focusing on real world driving emission cycles

Investigation of the Effect of Simulated Atmospheric Conditions at Different Altitudes on the Combustion Process in a Heavy-Duty Diesel Engine Based on Zero-Dimensional Modeling

Power recovery of a variable nozzle turbocharged diesel engine at high altitude by response surface methodology and sequential quadratic programming

The Effect of High Altitude Environment on Diesel Engine Performance: Comparison of Engine Operations in Hangzhou, Kunming and Lhasa Cities.

Multi-Objective Optimization of the Structural Design of a Combustion Chamber of a Small Agricultural Diesel Engine Fueled with B20 Blend Fuel at a High Altitude Area

The multi-parameter optimization of injections on double-layer diesel engines based on genetic algorithm

Multi-Optimization of Injection Parameters Affecting Emissions in a Diesel Engine Fueled with Fischer–Tropsch Fuel Based on NSGA-II

Multidimensional Computational Fluid Dynamics Combustion Process Modeling of a 6V150 Diesel Engine

Optimization of combustion process for non-road heavy-duty diesel engines

Assessment of Optimization Methodologies to Study the Effects of Bowl Geometry, Spray Targeting and Swirl Ratio for a Heavy-Duty Diesel Engine Operated at High-Load

Numerical study on the injection strategy on combustion and emission characteristics of a non-road diesel engine under different altitude conditions

Multiobjective Optimization of Diesel Particulate Filter Regeneration Conditions Based on Machine Learning Combined with Intelligent Algorithms

Numerical Study on the Effect of Injector Nozzle Hole Number on Diesel Engine Performance under Plateau Conditions

Multi-objective optimization of a hydrogen-fueled Wankel rotary engine based on machine learning and genetic algorithm

Integrated optimization of dedicated engine and energy management strategy for the plug-in hybrid commercial vehicle at high altitude

An investigation of the effect of plateau environment on the soot generation and oxidation in diesel engines

Multi-objective optimization of a diesel engine-ORC combined system integrating artificial neural network with genetic algorithm

Support Vector Machine and Genetic Algorithms to Optimize Combustion for Low Nox Emission

Study of In-Cylinder Heat Transfer Boundary Conditions for Diesel Engines under Variable Altitudes Based on the CHT Model

Application of CFD, Taguchi Method, and ANOVA Technique to Optimize Combustion and Emissions in a Light Duty Diesel Engine