Abstract:Structural hybridization and size miniaturization of integrated photonic devices are among the hotspots of photonics research field. The crosstalk between densely arranged subwavelength-width optical waveguides such as optical microfibers has become an important issue. Here we investigate a common case of crosstalk in two intersecting subwavelength-diameter optical microfibers at 1550-nm wavelength by numerical simulations and experiments, and obtain the dependence of coupling efficiency and crosstalk on modal polarizations, intersection angle, fiber diameter and separation of the two fibers, respectively. The simulation results show that, the crosstalk decreases with increasing intersection angle and separation between the two microfibers. Especially, for single-mode microfibers, the crosstalk is lower than 1% (i. e., better than -20 dB) when the intersection angle is larger than 60 similar to, and can be minimized to less than 0.05% (i. e., better than -33 dB) for perpendicular intersection (i. e., intersection angle of 90 degrees). However, the dependence of crosstalk on fiber diameter is not monotonous, typically, from the single-mode cutoff diameter, the crosstalk increases with decreasing diameter until reaching a maximum, and decreasing afterward. To verify the simulation, we have experimentally measured the angle-dependent crosstalk between contacting microfibers with typical diameters. With increasing intersection angle, the crosstalk drastically decreases to a negligible value (less than -41 dB for vertically intersecting microfibers), which is consistent with the simulation results. Our results offer a valuable reference or guideline for designing compact optical interconnection and integration with optical microfibers or other subwavelength-width waveguides alike.

Autler-Townes Splitting and Induced Transparency Windows in a Multimode Microfiber Knot.

Microfiber Resonators in the Linear and the Nonlinear Regimes

Polarization Effects in Microfiber Loop and Knot Resonators

Demonstration of a Reef Knot Microfiber Resonator

Crosstalk in Two Intersecting Optical Microfibers

Direct Observation of Multimode Interference in Rare-Earth Doped Micro/nanofibers

Microfiber Knot Dye Laser Based on the Evanescent-Wave-Coupled Gain

All-fiber Add-Drop Filters Based on Microfiber Knot Resonators.

Demonstration of Microfiber Knot Laser

Experimental Demonstration of a Compact Variable Single-Mode Fiber Coupler Based on Microfiber

Demonstration of Optical Microfiber Knot Resonators

Twist-Related Speckle Variation in Graded-Index Multimode Fiber

A Microfiber Knot Incorporating a Tungsten Disulfide Saturable Absorber Based Multi-Wavelength Mode-Locked Erbium-Doped Fiber Laser

Electromagnetically induced transparency-like effect in a single polydimethylsiloxane-coated silica microtoroid

Coupling Whispering-Gallery-Mode Microcavities with Modal Coupling Mechanism

All-optically controlled mode-coupling induced transparency with tunable efficiency in a microsphere resonator

Analog to Multiple Electromagnetically Induced Transparency in All-Optical Drop-Filter Systems

Manipulation of polarization topology using a Fabry-Pérot fiber cavity with a higher-order mode optical nanofiber

Tunneling‐induced transparency in a chaotic microcavity

Spatiotemporal mode-locking and photonic flywheel in multimode microresonators

High Finesse Microfiber Knot Resonators Made from Double-Ended Tapered Fibers.