Abstract:Inkjet printing method is one of the most effective ways for fabricating large-area perovskite solar cells (PSCs). However, because ink crystallizes rapidly during printing, the printed perovskite film is discontinuous with increasing defects. It severely restricts the application of the inkjet printing technology to the fabrication of perovskite photovoltaic devices. Here, we designed a new mixed-cation perovskite ink system that can controllably retard the crystallization rate of perovskite. In this new ink system, the printing solvent is composed of n-methyl pyrrolidone (NMP) and dimethyl formamide (DMF), and PbX2 is replaced by PbX2-DMSO (X = Br, I) complex as a printing precursor to create a high-quality perovskite layer. Accordingly, the printed Cs0.05MA0.14FA0.81PbI2.55Br0.45 perovskite film exhibited high homogeneity with a large grain size (over 500 nm). Besides, the printed perovskite film possessed lower defects with improved carrier lifetime compared to the control sample. Combining these advantages, the printed PSC delivers decent power conversion efficiencies (PCEs) of 19.6% (0.04 cm2) and 17.9% (1.01 cm2). The large-area device can still retain its original efficiency of 89% when stored in air with humidity less than 20% for 1000 h.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c09485?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c09485</a>.Detailed ink system preparation methods; microscopy images of the perovskite film after vacuum annealing; XRD patterns of the perovskite powder; J–V curves of PSCs; statistics of PV parameters of inkjet-printed PSCs based on different ink compositions; cross-sectional SEM images of PSCs; parameter settings of the inkjet printer (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c09485/suppl_file/am0c09485_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Printable CsPbBr<sub>3</sub> perovskite quantum dot ink for coffee ring-free fluorescent microarrays using inkjet printing

Printable CsPbBr3 perovskite quantum dot ink for coffee ring-free fluorescent microarrays using inkjet printing

14.5: Perovskite Quantum Dot Color Conversion Pattern Fabricated by an In‐situ Inkjet Printing

Perovskite quantum dot microarrays: In situ fabrication via direct print photopolymerization

Perovskite Quantum Dot Microarrays:In Situ Fabrication Via Direct Print Photopolymerization

In Situ Inkjet Printing Strategy for Fabricating Perovskite Quantum Dot Patterns

Fluorescent Microarrays of in Situ Crystallized Perovskite Nanocomposites Fabricated for Patterned Applications by Using Inkjet Printing.

Electrohydrodynamically Printed High‐resolution Arrays Based on Stabilized CsPbBr3 Quantum Dot Inks

Macro-prepared Cs4PbBr6/CsPbBr3 Perovskite Screen Printing Inks

In Situ Inkjet Printing Patterned Lead Halide Perovskite Quantum Dot Color Conversion Films by Using Cheap and Eco‐Friendly Aqueous Inks

Printable and Writable CsPbBr 3 /Cs 4 PbBr 6 Perovskite Quantum Dots as Fluorescent Inks for Down-Conversion Flexible ACEL Devices

14.4: Inkjet Printing Patterned Quantum Dot Microarrays

Coffee Ring-Free Inkjet Printing Using UV-Curable Quantum Dot-Acrylate Solution for High Resolution Displays

Ink Engineering of Inkjet Printing Perovskite

Pushing Patterning Limits of Drop‐On‐Demand Inkjet Printing with Cspbbr<sub>3</sub>/PDMS Nanoparticles

A Universal Ternary‐Solvent‐Ink Strategy toward Efficient Inkjet‐Printed Perovskite Quantum Dot Light‐Emitting Diodes

Pushing Patterning Limits of Drop-On-Demand Inkjet Printing with Cspbbr3/PDMS Nanoparticles

High-brightness Perovskite Quantum Dot Light-Emitting Devices Using Inkjet Printing

Critical Size/Viscosity for Coffee-Ring-Free Printing of Perovskite Micro/Nanopatterns

Inkjet Printing Matrix Perovskite Quantum Dot Light‐Emitting Devices

Effect of polymethyl methacrylate on in situ patterning of perovskite quantum dots by inkjet printing