Abstract:Science Progress, Volume 107, Issue 4, October-December 2024. Due to the advantages of high stiffness, high precision, high load capacity and large workspace, hybrid robots are applicable to drilling and milling of complicated components with large sizes, for instance car panels. However, the difficulty in establishing an exact dynamic model and external disturbances affect the high accuracy control directly, which will decrease the machining accuracy and thereby affect the machining quality and efficiency of the system. Sliding mode control is an effective approach for high-order nonlinear dynamic systems since that it is very insensitive to disturbances and parameter variations. However, chattering may exist in traditional sliding mode control with fixed parameters, which results from a constant approaching speed. Besides, the approaching speed will affect the chattering strength directly. To solve these problems, a modified sliding mode controller with self-adaptive parameters is proposed to enhance the trajectory-tracking performance of a 5-degree-of-freedom hybrid robot. Firstly, the kinematic model of the robot is established. Then adopting the principle of virtual work, a rigid dynamic model of the robot is built. Based on the built dynamic model, a modified sliding mode control method is developed, of which the approaching speed is dependent on the system state. Finally, the sliding mode controller with self-adaptive parameters is created for a hybrid robot. The proposed sliding mode controller can achieve a rapid approaching speed and suppress chattering simultaneously. Simulation results demonstrate that the proposed modified sliding mode controller can achieve a comparatively accurate and smooth trajectory, which owns good robustness to external disturbances.

Integration of Optimized Feedrate into an Online Adaptive Force Controller for Robot Milling

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring

Online Optimization-Based Time-Optimal Adaptive Robust Control of Linear Motors with Input and State Constraints

Variable Force Tracking Control Via Online Learning

A digital twin-driven cutting force adaptive control approach for milling process

Adaptive Dynamic Cutting Force Control Analysis for Peripheral Milling

Direct Optimization Based Compensation Adaptive Robust Control of Nonlinear Systems with State and Input Constraints

Robust nonlinear controller for PMLSM feed drives in grinding machines

Adaptive Robust Control of Machining Force and Contour Error with Tool Deflection Using Global Task Coordinate Frame

Fast and Accurate Motion Tracking of a Linear Motor System under Kinematic and Dynamic Constraints: an Integrated Planning and Control Approach

Dual PID Adaptive Variable Impedance Constant Force Control for Grinding Robot

-Synthesis-Based Adaptive Robust Control of Linear Motor Driven Stages With High-Frequency Dynamics: A Case Study

Development of a Force Controlled Nanocutting System Using a Flexible Mechanism for Adaptive Cutting of Microstructures on Non-Planar Surfaces

Smooth adaptive hybrid impedance control for robotic contact force tracking in dynamic environments

Constant force grinding controller for robots based on SAC optimal parameter finding algorithm

Sliding mode control with self-adaptive parameters of a 5-DOF hybrid robot

Dynamic Feedrate Optimization for Parametric Toolpath with Data-Based Tracking Error Prediction

Adaptive Contact-Implicit Model Predictive Control with Online Residual Learning

Multivariable Iterative Learning Control Design for Precision Control of Flexible Feed Drives

Hybrid active/passive force control strategy for grinding marks suppression and profile accuracy enhancement in robotic belt grinding of turbine blade

A Neuron Model-Free Controller With Fuzzy Self-Tuning Gain For Turning Processes