MAPbI3 nanowires prepared by a facile Vapor Transfer Method for simple photodetector

Yitong Liu,Kejie Feng,Xiaoliang Mo

DOI: https://doi.org/10.1016/j.mtcomm.2019.100794

IF: 3.8

2020-01-01

Materials Today Communications

Abstract:•A self-assembled method for PbI2 nanowires.•A novel MAPbI3 nanowires synthesis method with good crystallization and morphology.•The fabrication of MAPbI3 nanowires photodetector and the characterization.

What problem does this paper attempt to address?

Synthesis of PbI2 nanowires for high sensitivity photodetectors

Jinqiu Liu,Zhaohuan Liang,Bo Xu,Hui Xiang,Yidong Xia,Jiang Yin,Zhiguo Liu

DOI: https://doi.org/10.1039/c6ra11659k

IF: 4.036

2016-01-01

RSC Advances

Abstract:A simple catalyst-free physical vapor transport method was used to synthesize lead iodide (PbI2) nanowires of high crystalline quality. The photodetectors based on the single PbI2 nanowire were fabricated by FIB technique, and their light-induced electric properties were investigated in detail. The photoswitch current ratio of the single PbI2 nanowire photodetector is 48 under the illumination of 450 nm light with an optical power of 360 mW cm(-2) at a bias of 3 V. The responsivity, R, of the detector at 3 V is about 100 mA W-1. Generally, high-yield PbI2 nanowires synthesized by the physical vapor transport method are promising candidates for high-performance photodetectors.
Stable Copper Phosphorus Iodide (cu2p3i2) Nano/Microwire Photodetectors

Pedro E. M. Amaral,Hai-Feng Ji

DOI: https://doi.org/10.1002/cnma.201800275

IF: 3.82

2018-01-01

ChemNanoMat

Abstract:Crystalline Cu2P3I2 nano- and microwires with high purity were synthesized through a chemical vapor transport method in evacuated silica ampoules using copper(I) iodide and red phosphorus as precursors for potential applications as photodetectors. Single-wire field-effect transistors (FET) were built to study their electronic and optoelectronic properties. The wires exhibit a p-type semiconducting behavior with an electron mobility of 31.6 cm(2)V(-1)s(-1) and I-ON/I-OFF ratio of similar to 10(3). The photodetectors are highly reproducible and stable with a short response time (40-70 ms).
Tunable Fabrication of MAPbX3 Triangular‐Micro‐Wires Array for Constructing High Sensitivity Photodetector

Xiuzhen Xu,Yuting Xiong,Wenfei Liu,Dandan Hao,Zhenkai Ji,Yiqiang Zhan,Jia Huang,Xiaobin Xu

DOI: https://doi.org/10.1002/admt.202300946

IF: 6.8

2023-01-01

Advanced Materials Technologies

Abstract:Organic-inorganic hybrid perovskite (MAPbX(3)) is known having excellent photoelectric properties. Compared to polycrystalline films, perovskite micro/nanowires can provide improved optoelectronic properties, mechanical flexibility, and adaptability due to higher crystallinity. However, their economical, scalable, and controllable fabrication remains a challenge. In this work, the authors report a facile way to fabricate high-quality MAPbX(3) triangular-micro-wires (TMWs). The Si/SiO2 substrate with triangular-micro-trenches (TMTs) array serves as the template for the growth of MAPbX(3) TMWs array through blade coating. The MAPbX(3) TMW first nucleated at the trench bottom, which facilitating the nanowire growth with high crystallinity. In addition, the size and periodicity of TMTs array can be independently controlled, providing potential for scale-up device applications. The photodetectors fabricated with these MAPbI(3) TMWs show excellent responsivity of (144.5 +/- 2.1) A/W and specific detectivity of (2.7 +/- 0.02) x 10(11) Jones under weak light (0.5 mu W cm(-2)). Their photoresponse to pulsed light is stable and reproducible, with rise and decay times of 7.5 and 6.0 ms, respectively. Finally, with the demonstration of the image sensor application, MAPbX(3) TMWs array is anticipated to be suitable for large-area, high-performance integrated optoelectronics.
Highly controllable synthesis of MAPbI3 perovskite nanocrystals with long carrier lifetimes and narrow band gap for application in photodetectors

Tao Wang,Sumin Hou,Huafang Zhang,Yi Yang,Wen Xu,Tianyong Ao,Miao Kang,Gencai Pan,Yanli Mao

DOI: https://doi.org/10.1016/j.jallcom.2021.159589

IF: 6.2

2021-01-01

Journal of Alloys and Compounds

Abstract:Low-dimensional organic-inorganic hybrid perovskite materials have attracted much attention in photoelectric devices due to their exotic performance in optoelectronics compared with their bulk and thin-film counterparts. In this article, using a simple ligand-assisted deposition method, we successfully synthesized uniform methylammonium lead iodide (MAPbI(3)) perovskite nanorods, nanotriangles and nanocubes, and investigated their photoelectric properties after fabricated into photodetectors (PDs) on SiO2/Si substrates. It is found that the synthesized MAPbI(3) nanorods not only have extremely small optical band gap (minimum of similar to 1.36 eV), but also have long photoluminescence (PL) lifetime (longest of similar to 7.81 mu s) and high absolute PL quantum yields (maximum of similar to 45%), and the PL lifetime is more than about one order of magnitude higher than that the reported previously. The PDs based on MAPbI(3) nanorods presented a wide spectral response "window" from 350 to at least 950 nm, and exhibited a photoresponsivity of 12.2 mA/W, a detectivity of 2.67 x 10(11) Jones, the on/off ratio of more than 800, the rise/decay time constants of 18/25 ms, under the excitation at 405 nm. Further analysis suggests that the dramatically improved photo-electric conversion properties of the nanorods PDs could be closely related with their morphology dependent properties, including bandgap, PL lifetime, trap density (n(trap)) and carrier concentration. These results provide a simple and effective method for preparing different morphology low-dimensional MAPbI(3), and discuss the mechanism of morphology-dependent photoelectric performance of PDs, which is of great significance for potential applications in the field of photoelectronic devices. (C) 2021 Elsevier B.V. All rights reserved.
Highly Crystalized MAPbX3 Perovskite Triangular Nanowire Arrays for Optoelectronic Applications

Yuting Xiong,Xiuzhen Xu,Bo Chen,Xiaobin Xu

DOI: https://doi.org/10.1002/adma.202310427

IF: 29.4

2023-11-28

Advanced Materials

Abstract:Here, a facile fabrication approach for high‐quality 1D perovskite triangular nanowire (TNW) array synthesis through space‐confined effect was reported. A soft stamp containing 1D triangular linear array pattern was used to confine the MAPbX3 solution and to guide the growth of the nanowires along the prescribed direction with good crystallinity. The further constructed photodetectors based on the obtained MAPbI3 TNWs, which exhibit superior photoresponse properties with a responsivity of (125.2 ± 2.5) A W−1 and detectivity of (2.8 ± 0.8) × 1013 Jones at the wavelength of 650 nm. The excellent performance is attributed to the highly crystalline TNW with optical anisotropy and a small asymptotic height, which reduces the probability of photon reflection and promotes carrier transport. More interestingly, the increased surface area of the triangular device can present superior flexibility after a couple of thousands of bending cycles. Furthermore, by fabricating 7 × 7 photodetector arrays, the potential image sensor application was demonstrated. The perovskite nanowire fabrication approach is scalable and compatible with current semiconductor manufacturing, which indicates their great potential in broad applications. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Solution-phase, Template-Free Synthesis of PbI2 and MAPbI3 Nano/microtubes for High-Sensitivity Photodetectors

Perumal Veeramalai Chandrasekar,Shengyi Yang,Jinming Hu,Muhammad Sulaman,Yuansheng Shi,Muhammad Imran Saleem,Yi Tang,Yurong Jiang,Bingsuo Zou

DOI: https://doi.org/10.1039/c9nr00452a

IF: 6.7

2019-01-01

Nanoscale

Abstract:Organic-inorganic hybrid perovskite materials with exotic semiconducting properties have become inevitable candidates for next-generation electronic devices. Very recently, a low dimensional nanostructure of the perovskite materials has attracted the scientific community due to its enhanced performance in optoelectronics as compared to its bulk counterparts. Herein, a facile method was developed for the scalable, room-temperature synthesis of CH3NH3PbI3 (MAPbI3) nano/microtubes by direct conversion of lead iodide (PbI2) microtubes through a solution-phase method. At first, the PbI2 microtubes were synthesized by the anti-solvent crystallization process and subsequently converted to CH3NH3PbI3 nano/microtubes by the addition of CH3NH3I (MAI) precursor directly in the solution phase. The corresponding photodetectors (PDs) in the lateral metal-semiconductor-metal (MSM) configuration of the PbI2 microtubes and MAPbI3 nano/microtubes on glass substrates were investigated systematically. Compared to the PbI2 based PDs (557 mA W-1, 3.65 × 1012 Jones, 0.251 s/0.252 s), the MAPbI3 based PDs exhibit higher photoresponsivity, specific detectivity, and faster response time (25 A W-1, 9.9 × 1013 Jones, 49 ms/20 ms) under irradiation with 4.6 μW cm-2 intensity light of the 532 nm laser at a bias of 5 V. The proposed method is a low-temperature process, easy to apply in large scale synthesis, and finds potential applications in optoelectronic devices.
Photodetectors: Large-Scale Synthesis of Freestanding Layer-Structured PbI2 and MAPbI3 Nanosheets for High-Performance Photodetection (Adv. Mater. 39/2017)

Changyong Lan,Ruoting Dong,Ziyao Zhou,Lei Shu,Dapan Li,SenPo Yip,Johnny C. Ho

DOI: https://doi.org/10.1002/adma.201770284

IF: 29.4

2017-01-01

Advanced Materials

Abstract:High-density, crystalline, and freestanding PbI2 and MAPbI3 nanosheets are synthesized by Johnny C. Ho and co-workers in article number 1702759, on a large scale through the nucleation of microplanes on substrates with a rough surface by manipulating the microenvironment during physical vapor deposition. When configured into photodetectors, they exhibit efficient photodetection with excellent performance in responsivity and detectivity.
Fabrication of Self-Assembly Polycrystalline Perovskite Microwires and Photodetectors

Can Zhu,Yang Tang,Feng Chen,A. Gowri Manohari,Ye Zhu,Zengliang Shi,Chunxiang Xu

DOI: https://doi.org/10.1016/j.jcrysgro.2016.09.013

IF: 1.8

2016-01-01

Journal of Crystal Growth

Abstract:In this work, perovskite CH3NH3PbI3 (MAPbI3) microwires has been synthesized via a simple solution self-assembly method for facile fabrication of photoelectronic devices. A two-step growth process was proposed to elucidate the formation and growth mechanisms of the microwires. Also, a photodetector was fabricated and analyzed its photoresponse characteristics. The device presented a stable and repeatable photocurrent response. The on-off ratio was about 4.02×103 as well as the rise and decay time was 0.2ms and 0.25ms which are comparable even superior to other reported photodetectors of perovskite.
Tunable Periodic Nanopillar Array for MAPbI3 Perovskite Photodetectors with Improved Light Absorption

Zhengtong Yao,Yuting Xiong,Hanyue Kang,Xiuzhen Xu,Jianhe Guo,Wen Li,Xiaobin Xu

DOI: https://doi.org/10.1021/acsomega.3c07390

IF: 4.1

2024-01-01

ACS Omega

Abstract:In the field of optoelectronic applications, the vigorous development of organic-inorganic hybrid perovskite materials, such as methylammonium lead triiodide (MAPbI(3)), has spurred continuous research on methods to enhance the photodetection performance. Periodic nanoarrays can effectively improve the light absorption of perovskite thin films. However, there are still challenges in fabricating tunable periodic patterned and large-area perovskite nanoarrays. In this study, we present a cost-effective and facile approach utilizing nanosphere lithography and dry etching techniques to create a large-area Si nanopillar array, which is employed for patterning MAPbI(3) thin films. The scanning electron microscopy (SEM) and X-ray diffraction (XRD) results reveal that the introduction of nanopillar structures did not have a significant adverse effect on the crystallinity of the MAPbI(3) thin film. Light absorption tests and optical simulations indicate that the nanopillar array enhances the light intensity within the perovskite films, leading to photodetectors with a responsivity of 11.2 A/W and a detectivity of 7.3 x 10(10) Jones at 450 nm in wavelength. Compared with photodetectors without nanostructures, these photodetectors exhibit better visible light absorption. Finally, we demonstrate the application of these photodetector arrays in a prototype image sensor.
Large-Scale Synthesis of Freestanding Layer-Structured PbI 2 and MAPbI 3 Nanosheets for High-Performance Photodetection.

Changyong Lan,Ruoting Dong,Ziyao Zhou,Lei Shu,Dapan Li,SenPo Yip,Johnny C Ho

DOI: https://doi.org/10.1002/adma.201702759

IF: 29.4

2017-01-01

Advanced Materials

Abstract:Recently, due to the possibility of thinning down to the atomic thickness to achieve exotic properties, layered materials have attracted extensive research attention. In particular, PbI2, a kind of layered material, and its perovskite derivatives, CH3NH3PbI3 (i.e., MAPbI(3)), have demonstrated impressive photoresponsivities for efficient photodetection. Herein, the synthesis of large-scale, high-density, and freestanding PbI2 nanosheets is demonstrated by manipulating the microenvironment during physical vapor deposition. In contrast to conventional two-dimensional (2D) growth along the substrate surface, the essence here is the effective nucleation of microplanes with different angles relative to the in-plane direction of underlying rough-surfaced substrates. When configured into photodetectors, the fabricated device exhibits a photoresponsivity of 410 mA W-1, a detectivity of 3.1 x 10(11) Jones, and a fast response with the rise and decay time constants of 86 and 150 ms, respectively, under a wavelength of 405 nm. These PbI2 nanosheets can also be completely converted into MAPbI(3) materials via chemical vapor deposition with an improved photoresponsivity up to 40 A W-1. All these performance parameters are comparable to those of state-of-the-art layered-material-based photodetectors, revealing the technological potency of these freestanding nanosheets for next-generation high-performance optoelectronics.
Passivated Single-Crystalline CH3NH3PbI3 Nanowire Photodetector with High Detectivity and Polarization Sensitivity

Liang Gao,Kai Zeng,Jingshu Guo,Cong Ge,Jing Du,Yang Zhao,Chao Chen,Hui Deng,Yisu He,Haisheng Song,Guangda Niu,Jiang Tang

DOI: https://doi.org/10.1021/acs.nanolett.6b03119

2016-12-14

Abstract:Photodetectors convert light signals into current or voltage outputs and are widely used for imaging, sensing, and spectroscopy. Perovskite-based photodetectors have shown high sensitivity and fast response due to the unprecedented low recombination loss in this solution processed semiconductor. Among various types of CH3NH3PbI3 morphology (film, single crystal, nanowire), single-crystalline CH3NH3PbI3 nanowires are particularly interesting for photodetection because of their reduced grain boundary, morphological anisotropy, and excellent mechanical flexibility. The concomitant disadvantage associated with the CH3NH3PbI3 nanowire photodetectors is their large surface area, which catalyzes carrier recombination and material decomposition, thus significantly degrading device performance and stability. Here we solved this key problem by introducing oleic acid soaking to passivate surface defects of CH3NH3PbI3 nanowires, which leads to a device with much improved stability and unprecedented sensitivity (measured detectivity of 2 × 1013 Jones). By taking advantage of their one-dimensional geometry, we also showcased, for the first time, the linear dichroic photodetection of our CH3NH3PbI3 nanowire photodetector.
Pb2BiS2I3 Nanowires for Use in Photodetectors

Zhijun Wang,Ge He,Huazhou Zhang,Che Liao,Chi Yang

DOI: https://doi.org/10.1021/acsanm.2c03958

IF: 6.14

2022-01-01

ACS Applied Nano Materials

Abstract:The multicomponent chalcogenide halides of group V and IV elements have aroused great research interest in photoelectric applications owing to their efficiency, stability, and interesting semiconducting properties. Herein, we used a hot-injection solution approach to synthesize Pb2BiS2I3 nanowires (NWs). The Pb2BiS2I3 NWs show a narrow size distribution, excellent air and thermal stabilities, and strong absorption in the visible-light region. The Pb2BiS2I3 NWsbased photodetectors exhibit excellent photoresponse and stability under different wavelengths of visible-light irradiation. The photodetector device exhibits a similar to 100 high current on/off ratio, 0.14 A/W photoresponsivity, and 8.71 x 1011 Jones detectivity under 525 nm laser irradiation. These results suggest that Pb2BiS2I3 is a potential candidate for next-generation multifunctional photoelectric devices.
A microwave-assisted template-free route for large-scale synthesis of photoluminescent single crystal CsPbI3 nanotubes

Weiwei Xiong,Ziyi Zhang,Yutao Huang,Chenxin Xu,Jiajing Wu,Lingling Li,Fenfen Zheng,Xingcai Wu

DOI: https://doi.org/10.1039/c9ce01722d

IF: 3.756

2020-01-01

CrystEngComm

Abstract:Great efforts have been devoted to the synthesis of various CsPbX3 nanostructures in view of their excellent photovoltaic performance and promising optoelectronic applications. However, the preparation of high-quality one-dimensional cesium lead halide nanotubes still remains challenging and unexplored. Here, we report a microwave-assisted synthetic approach for high-quality single crystalline CsPbI3 nanotubes featuring highly uniform sizes and stable and bright photoluminescence. Furthermore, a CsPbI3 nanotube based photodetector was assembled, which exhibits high sensitivity, stability and a fast response to 405 nm wavelength light. As a new member of the all-inorganic CsPbX3 nanostructure family, CsPbI3 nanotubes could provide a potential platform for understanding their fundamental properties and paving the way for their future application in optoelectronic devices.
Piezo-phototronic Effect Enhanced Photodetectors Based on MAPbI3 Perovskite

Jiaheng Nie,Yan Zhang,Lijie Li,Jizheng Wang

DOI: https://doi.org/10.1039/c9tc05721h

IF: 6.4

2020-01-01

Journal of Materials Chemistry C

Abstract:A novel piezo-phototronic effect enhanced photodetector based on MAPbI3 polycrystalline perovskite is designed and fabricated with reconfigurable piezoelectric performance.
Embedding of Ti3C2Tx Nanocrystals in MAPbI3 Microwires for Improved Responsivity and Detectivity of Photodetector

Hang Guo,Hongyue Wang,Haibo Fan,Qian Ye,Jin Zhang,Fengren Cao,Liang Li,Yu Tong,Hongqiang Wang

DOI: https://doi.org/10.1002/smll.202101954

IF: 13.3

2021-01-01

Small

Abstract:Organic-inorganic hybrid MAPbI(3) microwires show unique optoelectronic properties for high performances of photodetectors (PDs). However, the defects-assisted nonradiative recombination is harmful for carrier transport, which limits the performances improvement of MAPbI(3) microwires PDs. Traditional organic passivation agents effectively combine the surface defects of microwires and also reduce the mobility of overall film based on the perovskite microwires. Therefore, the improvement of internal carrier transport of microwires and the mobility of integrated film simultaneously is a particular challenge for fabrication of performances enhanced perovskite microwires PDs. Here, the Ti3C2Tx NCs are fabricated by nonfocus laser irradiation in liquid environment, and hybrids the high conductive NCs in the MAPbI(3) microwires. The presence of Ti3C2Tx NCs renders defects passivation, enhancement of crystalline orientation, charge transport, and carrier extraction for MAPbI(3) microwires, and boots the mobility of microwires based film, leading to about tenfolds enhancement of performances of PDs than that of the control. The maximum responsivity and the detectivity of the Ti3C2Tx NCs embedded MAPbI(3) microwires PDs reach to 1.70 A W-1 and 7.0 x 10(11) Jones in visible window, respectively. The findings suggest that the laser generated high conductive Ti3C2Tx NCs is an effective additive for perovskite microwires to fabricate performances enhanced optoelectronics.
Solution‐Processed, Self‐Powered Broadband CH 3 NH 3 PbI 3 Photodetectors Driven by Asymmetric Electrodes

Chandrasekar Perumal Veeramalai,Shengyi Yang,Ruonan Zhi,Muhammad Sulaman,Muhammad Imran Saleem,Yanyan Cui,Yi Tang,Yurong Jiang,Libin Tang,Bingsuo Zou

DOI: https://doi.org/10.1002/adom.202000215

IF: 9

2020-01-01

Advanced Optical Materials

Abstract:In general, the fabrication of high‐performance, self‐powered broadband photodetectors based on traditional semiconducting thin films is tedious and costly. Here, in this paper a high‐performance, solution‐processed, and self‐powered CH 3 NH 3 PbI 3 (MAPbI 3 ) nanocrystal based photodetector ITO/MAPbI 3 /Ag is presented, and it shows broadband photoresponse from the visible to the near‐infrared wavelength region. The pronounced enhanced performance of the photodetector is due to taking the advantage of the built‐in electric field induced by the work function difference of two electrodes. The optimized photodetector shows a responsivity of 4.9 and 1.42 A W −1 with a specific detectivity of 7.6 × 10 13 and 1.77 × 10 13 Jones under 19 µW cm −2 white light illumination and 26 µW cm −2 808 nm illumination at zero bias, respectively. Therefore, such a concept of simple device geometry and feasible technique will open up a new and promising avenue for the fabrication of self‐powered photodetectors and the development of imaging devices.
Large-Area Periodic Organic-Inorganic Hybrid Perovskite Nanopyramid Arrays for High-Performance Photodetector and Image Sensor Applications

Xiuzhen Xu,Wenfei Liu,Zhenkai Ji,Dandan Hao,Wenyuan Yan,Zilong Ye,Yan Hu,Minghe Fang,Changchun Wang,Liang Ma,Jia Huang,Xiaobin Xu,Paul S. Weiss

DOI: https://doi.org/10.1021/acsmaterialslett.1c00298

IF: 11.4

2021-01-01

ACS Materials Letters

Abstract:The rapid growth of organic-inorganic hybrid perovskite materials (such as methylammonium lead triiodide, MAPbI(3)) in photoelectric applications has prompted investigations of novel strategies to improve photodetection performance. Although a few surface nanofabrication methods have been applied to texture perovskite thin films to enhance light trapping, it remains challenging to pattern large-area periodic perovskite nanoarrays in a tunable and scalable manner. In this work, we report a facile and low-cost approach to fabricate large-area SiO2/Si nanopyramids arrays through nanosphere lithography. These nanopyramids arrays are used to pattern MAPbI(3) thin films. We find that the introduction of nanopyramid arrays enhances the light intensity within the perovskite film, which is confirmed by light absorption tests and optical simulations. As a result, the photodetectors based on MAPbI(3) with nanopyramid structures show excellent responsivity of 28.8 +/- 1.0 A/W and detectivity of (3.5 +/- 0.1) x 10(11) Jones at 650 nm. The photoresponse of the photodetector to pulsed light is highly stable and reproducible, with rise and decay times of similar to 0.7 and 1.1 ms, respectively. They also have a broader light sensitivity range from ultraviolet to infrared light, i.e., 340 nm to 1100 nm, compared to those without nanostructures. Finally, we demonstrate a prototype image sensor using these photodetector arrays.
Embedding of Ti 3 C 2 T x Nanocrystals in MAPbI 3 Microwires for Improved Responsivity and Detectivity of Photodetector

Hang Guo,Hongyue Wang,Haibo Fan,Qian Ye,Jin Zhang,Fengren Cao,Liang Li,Yu Tong,Hongqiang Wang

DOI: https://doi.org/10.1002/smll.202101954

IF: 13.3

2021-07-16

Small

Abstract:Organic–inorganic hybrid MAPbI3 microwires show unique optoelectronic properties for high performances of photodetectors (PDs). However, the defects-assisted nonradiative recombination is harmful for carrier transport, which limits the performances improvement of MAPbI3 microwires PDs. Traditional organic passivation agents effectively combine the surface defects of microwires and also reduce the mobility of overall film based on the perovskite microwires. Therefore, the improvement of internal carrier transport of microwires and the mobility of integrated film simultaneously is a particular challenge for fabrication of performances enhanced perovskite microwires PDs. Here, the Ti3C2Tx NCs are fabricated by nonfocus laser irradiation in liquid environment, and hybrids the high conductive NCs in the MAPbI3 microwires. The presence of Ti3C2Tx NCs renders defects passivation, enhancement of crystalline orientation, charge transport, and carrier extraction for MAPbI3 microwires, and boots the mobility of microwires based film, leading to about tenfolds enhancement of performances of PDs than that of the control. The maximum responsivity and the detectivity of the Ti3C2Tx NCs embedded MAPbI3 microwires PDs reach to 1.70 A W−1 and 7.0 × 1011 Jones in visible window, respectively. The findings suggest that the laser generated high conductive Ti3C2Tx NCs is an effective additive for perovskite microwires to fabricate performances enhanced optoelectronics.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Embedding Laser Generated GaAs Nanocrystals in Perovskite Wires for Enhanced Charge Transport and Photodetection

Guo Hang,Tong Yu,Fan Haibo,Ye Qian,Zhang Jin,Wang Hongyue,Cao Fengren,Li Liang,Wang Hongqiang

DOI: https://doi.org/10.1007/s11433-021-1827-x

2022-01-01

Abstract:Solution-processed perovskite wires are attractive candidates for photodetectors (PDs) due to their simple processibility as well as one-dimensional (1D) geometry with desirable charge carrier transport. However, the performance of the perovskite PDs is generally restricted by the charge carrier transport and extraction efficiency. Herein, we demonstrate that the charge transport and the consequent photodetection performance of MAPbI3 perovskite wires can be effectively enhanced by incorporating nanocrystals (NCs) of GaAs—a semiconductor with high charge carrier mobility. Taking advantage of the pulsed laser irradiation technique, we successfully fabricate ligand-free GaAs NCs with a size of ∽7 nm and homogeneously embed them in MAPbI3 perovskite wires through a simple solution-processed synthesis route. Compared with the pristine perovskite wires, the GaAs NCs modulated perovskite wires show improved charge carrier transport with the mobility rising from 1.13 to 3.67 cm2 V−1 s−1, and the resultant PD shows significant improvement in responsivity and detectivity. This study provides a new strategy for improving optoelectronic properties of halide perovskite materials and optimizing the device performance.
Self‐Template‐Directed Synthesis of Porous Perovskite Nanowires at Room Temperature for High‐Performance Visible‐Light Photodetectors

Sifei Zhuo,Jingfang Zhang,Yanmei Shi,Yi Huang,Bin Zhang

DOI: https://doi.org/10.1002/anie.201411956

2015-01-01

Angewandte Chemie

Abstract:The unique optoelectronic properties and promising photovoltaic applications of organolead halide perovskites have driven the exploration of facile strategies to synthesize organometal halide perovskites and corresponding hybrid materials and devices. Currently, the preparation of CH3 NH3 PbBr3 perovskite nanowires, especially those with porous features, is still a great challenge. An efficient self-template-directed synthesis of high-quality porous CH3 NH3 PbBr3 perovskite nanowires in solution at room temperature using the Pb-containing precursor nanowires as both the sacrificial template and the Pb(2+) source in the presence of CH3 NH3 Br and HBr is now presented. The initial formation of CH3 NH3 PbBr3 perovskite layers on the surface of the precursor nanowires and the following dissolution of the organic component of the latter led to the formation of mesopores and the preservation of the 1D morphology. Furthermore, the perovskite nanowires are potential materials for visible-light photodetectors with high sensitivity and stability.

MAPbI3 nanowires prepared by a facile Vapor Transfer Method for simple photodetector

Synthesis of PbI2 nanowires for high sensitivity photodetectors

Stable Copper Phosphorus Iodide (cu2p3i2) Nano/Microwire Photodetectors

Tunable Fabrication of MAPbX3 Triangular‐Micro‐Wires Array for Constructing High Sensitivity Photodetector

Highly controllable synthesis of MAPbI<sub>3</sub> perovskite nanocrystals with long carrier lifetimes and narrow band gap for application in photodetectors

Highly Crystalized MAPbX3 Perovskite Triangular Nanowire Arrays for Optoelectronic Applications

Solution-phase, Template-Free Synthesis of PbI2 and MAPbI3 Nano/microtubes for High-Sensitivity Photodetectors

Photodetectors: Large-Scale Synthesis of Freestanding Layer-Structured PbI<sub>2</sub> and MAPbI<sub>3</sub> Nanosheets for High-Performance Photodetection (Adv. Mater. 39/2017)

Fabrication of Self-Assembly Polycrystalline Perovskite Microwires and Photodetectors

Tunable Periodic Nanopillar Array for MAPbI3 Perovskite Photodetectors with Improved Light Absorption

Large-Scale Synthesis of Freestanding Layer-Structured PbI 2 and MAPbI 3 Nanosheets for High-Performance Photodetection.

Passivated Single-Crystalline CH3NH3PbI3 Nanowire Photodetector with High Detectivity and Polarization Sensitivity

Pb2BiS2I3 Nanowires for Use in Photodetectors

A microwave-assisted template-free route for large-scale synthesis of photoluminescent single crystal CsPbI3 nanotubes

Piezo-phototronic Effect Enhanced Photodetectors Based on MAPbI3 Perovskite

Embedding of Ti<sub>3</sub>C<sub>2</sub>T<i><sub>x</sub></i> Nanocrystals in MAPbI<sub>3</sub> Microwires for Improved Responsivity and Detectivity of Photodetector

Solution‐Processed, Self‐Powered Broadband CH 3 NH 3 PbI 3 Photodetectors Driven by Asymmetric Electrodes

Large-Area Periodic Organic-Inorganic Hybrid Perovskite Nanopyramid Arrays for High-Performance Photodetector and Image Sensor Applications

Embedding of Ti 3 C 2 T x Nanocrystals in MAPbI 3 Microwires for Improved Responsivity and Detectivity of Photodetector

Embedding Laser Generated GaAs Nanocrystals in Perovskite Wires for Enhanced Charge Transport and Photodetection

Self‐Template‐Directed Synthesis of Porous Perovskite Nanowires at Room Temperature for High‐Performance Visible‐Light Photodetectors