Abstract:The turntable is generally divided into an inertial test bench and a simulation turntable for calibration, performance testing, and semi-physical simulation of aircraft guidance products [1, 2], testing the attitude angle variation of a single carrier or the relative motion between multiple carriers, the docking process, and other parameters [3, 4]. In 1954, the turret developed by the Massachusetts Institute of Technology used photoelectric angle–measuring sensors and precision bearings, which improved the precision greatly and hence was put into production [5, 6]. At present, the domestic and international turntables have high precision and fast response, providing high calibration accuracy and accurate performance detection for the calibration and testing of inertial navigation components [7, 8]. With the advancement of industrial control technology, the turntable has been rapidly developed [9, 10]. In 2013, the five-axis flight simulation turret developed by Acutronic has successfully been able to meet the high-precision requirements for testing high-dynamic missile performance. The turntable is a high-precision turntable for seeker testing. The rotary table is driven by an ultrasonic motor to ensure the nonmagnetic and high-precision requirements of the turntable [11, 12]. Ultrasonic motors use the linear effects of piezoelectric materials to achieve linear or rotational motion through frictional coupling. They do not distort the magnetic field and achieve high precision [13, 14]. The turntable uses ceramic bearings to ensure rotational accuracy. The support method adopts an adjustable threelegged positioning. A level is installed on the bottom plate to observe whether the turntable is installed horizontally. The turntable is equipped with a very high precision grating encoder to ensure that the measurement accuracy is higher than the control accuracy. In this study, the pointing accuracy of the turntable was studied. The influence of the grating installation error on the accuracy detection was also analyzed. The steadystate error of the turntable has an important influence on the motion accuracy of the turntable. Finally, the influence of the control parameters on the steady-state error of the turntable was analyzed. The positioning accuracy and control parameters of the two-axis precision nonmagnetic turntable were obtained, and the PID adjustment was introduced to make the accuracy index of the nonmagnetic turntable meet the requirements. The turntable could realize a nonmagnetic working environment and achieve the high precision required by the index under the driving of the ultrasonic motor [15]. 2. Two-axis precision turntable control system construction and index requirements

Research on Speed Oscillation of Ultra-Low Speed Turntable in Aerospace Due to Limited Resolution Encoder

Design and Servo Control for Precision Opto-Electronic Tracking Turntable

Design And Dynamic Analysis Of A Micro Three-Axis Turntable

Research on the high torque and high precision ultrasonic motor for aerospace application

Multiaccelerometer-Based Method for High-Precision Angular Acceleration Measurement of Turntable

The Measurement and Error Analysis of Instantaneous Angular Speed Using Optical Incremental Encoder

Non-Contact Ultralow Rotational Speed Measurement of Real Objects Based on Rotational Doppler Velocimetry

Accuracy Analysis and Motion Control of Two-axis Nonmagnetic Turntable Based on Ultrasonic Motor

Research on Digital Estimation Method of Motor Speed and Rotor Position

Speed Feedback Observation Algorithm Based on Parameter Introduction and Its Application in Asynchronous Motor

Research on position compensation and velocity estimation method of servo system based on limited precision encoder

Characterization of Extreme Low-Resolution Digital Encoder for Control System with Sinusoidal Reference Signal

Instantaneous Speed Jitter Detection Via Encoder Signal and Its Application for the Diagnosis of Planetary Gearbox

Low Speed Control of PMAC Servo System Based on Reduced-order Observer

Optimal Adaptive Parameter Estimation-Based Tracking Control of Motor Turntable Servo System

Analysis of the Subdivision Errors of Photoelectric Angle Encoders and Improvement of the Tracking Precision of a Telescope Control System

An Effective Algorithm to Achieve Accurate Sinusoidal Amplitude Control with a Low-Resolution Encoder

Design of Test Turntable Based on Fuzzy PID Algorithm and its Error Correction

Improving the Angular Velocity Measured with a Low-Cost Magnetic Rotary Encoder Attached to a Brushed DC Motor by Compensating Magnet and Hall-Effect Sensor Misalignments

An Encoder Signal-Based Approach for Low-Speed Planetary Gearbox Fault Diagnosis

Choice of Optical-encoder and Measure of Speed and Rotor Place of Synchronous Motor