Abstract:Biomass residues are crucial feedstocks for facing climate change challenges due to high-value products, such as producing activated carbons (AC) for carbon capture. Two stages of pyrolysis followed by activation at high temperatures are the most used technique for converting lignocellulosic precursors into porous activated carbons. This process has shown to offer the highest surface areas; however, a two-stage process is undesirable as is an energy-intensive processes. Product characteristics are affected by feedstock and reaction rate conditions. In the present study pine wood (PW), olive stones (OS) and pecan nutshells (NS) were evaluated as feedstocks in the production of AC for selective post-combustion CO 2 capture via a single-step pyrolysis-activation using microwave heating. Direct raw biomass impregnation was completed using potassium hydroxide (KOH). The ACs were synthesised in 8 min using 300 W of microwave power with 8.8 GJ t −1 specific microwave energy input. Samples exhibited large specific surface areas (S BET ), up to 1340 m 2 g −1 , with 70 % of ultra-micropores (<0.8 nm), fundamental for high CO 2 adsorption capacity. Among the tested biomasses, PW was the best performing and physicochemical characterisation and CO 2 capture studies indicated that PW-based AC has 79 % carbon, amorphous structure, and possessed larger ultra-micropores that resulted in high CO 2 /N 2 selectivity (12.5), and one of the largest CO 2 uptakes for ACs (6.2 and 4.2 mmol/g at 0 and 25 °C, respectively). The CO 2 performance was investigated across a range of temperatures up to 100 °C, while cyclic regenerative performance was confirmed after 15 adsorption–desorption cycles. This study highlights the development of AC from different lignocellulosic resources by a fast and low-energy single microwave-pyrolysis activation process that can produce ultra-microporous structures implemented in post-combustion CO 2 capture.

One-step Rapid Pyrolysis Activation Method to Prepare Nanostructured Activated Coke Powder

Rapid Pyrolysis of Pulverized Coal for the Preparation of Nanostructured Powder Activated Coke

Activated coke preparation by physical activation of coal and biomass co-carbonized chars

One-Step Catalytic Activation Promoting Pore Development of Zhundong Coal-Based Activated Coke: A Compared Study with Conventional Carbonization–Activation Combined Process

Powder-Activated Semicokes Prepared from Coal Fast Pyrolysis: Influence of Oxygen and Steam Atmosphere on Pore Structure

Study of the reaction mechanism for preparing powdered activated coke with SO 2 adsorption capability via one-step rapid activation method under flue gas atmosphere

Efficient Production of Activated Carbon with Well-Developed Pore Structure Based on Fast Pyrolysis-Physical Activation

One-step microwave pyrolysis-H 3 PO 4 activation of woody biomass: Insight into the product characteristics and life cycle assessment

Powder activated coke prepared from coal fast pyrolysis: fractal characteristics and SO2 adsorption

A Facile Trace Potassium Assisted Catalytic Activation Strategy Regulating Pore Topology of Activated Coke for Combined Removal of Toluene/so2/no

Preparation of amorphous coal-based activated coke via a two-step process of carbonization and steam activation

Comparative study on the preparation of powdered activated coke for SO2 adsorption: One-step and two-step rapid activation methods

Single-step preparation of activated carbons from pine wood, olive stones and nutshells by KOH and microwaves: Influence of ultra-microporous for high CO 2 capture

Activated coke pore structure evolution and its influence on desulfuration

Synthesis of N-doped Hierarchical Porous Carbon with Excellent Toluene Adsorption Properties and Its Activation Mechanism

Effects Of Carbonization On The Co-Activation Of Sludge And Biomass To Produce Activated Coke

Preparation of Activated Carbon from Co-Pyrolysis Activation of Fly Ash and Biomass

Activation of Poplar Sawdust and Anthracite Coal: Distinct Involvement of Aliphatic and Aromatic Structures in Pore Development

Effects of temperature, oxygen and steam on pore structure characteristics of coconut husk activated carbon powders prepared by one-step rapid pyrolysis activation process

Experimental and numerical investigations on the heat production and thermal storage characteristics of rapid preparation amorphous powder activated coke

Rapid, simple and sustainable preparation of N-rich activated carbons with high performance for gas adsorption, via microwave heating