Abstract:Multimode electric propulsion system is widely used in deep space exploration. Its thrust is output in stages with the change of input power, which also means that continuous power changes lead to discontinuous thrust changes. In the design and optimization of low-thrust trajectory, the discontinuity of thrust is often neglected and regarded as a continuous parameter. The optimal design of low-thrust transfer trajectory constrained by multimode electric propulsion is studied, and the influence of thrust grading characteristics on the trajectory is analyzed in this paper. A specific optimization strategy is proposed, including three main steps: model discretization based on direct method, fast generation of initial value based on particle swarm optimization (PSO), and optimization based on sequential quadratic programming (SQP). The dynamic model and optimization model of low-thrust transfer trajectory is established. Then, the optimization model is discretized based on the direct method and the original optimal control problem is transformed into a parameter optimization problem in the form of nonlinear programming (NLP). A hybrid optimization algorithm based on PSO and SQP is proposed to solve the new NLP problem. PSO is used to search the initial value efficiently and guarantee the global performance of the initial value and SQP is used for local optimization based on initial value, which can give full play to the excellent global optimization performance of PSO and the outstanding local optimization performance of SQP. The effectiveness of the proposed optimization strategy is verified by a simulation example of the main belt asteroid Metis (1974 QU2) rendezvous mission with once Mars gravity assist. The results show that the optimal control curve obtained is in accordance with the optimal control form of bang-bang control derived from the theory, and the thruster has just two situations at any time: shutdown or startup with maximum thrust. In the working power range, increasing the number of thrust stages can improve the rate of energy utilization, thereby improving the efficiency of thruster, shortening the startup time and reducing fuel consumption. Meanwhile, ineffective grading should be avoided in the non-working power range.

Optimization of Variable-Specific-impulse Gravity-Assist Trajectories Via Optimality-Preserving Transformation

Design of Gravity-Assist Trajectory Based Impulsive Maneuver

Design and optimization of low-thrust gravity-assist trajectory in multi gravitational fields

Practical Techniques for Low-Thrust Trajectory Optimization with Homotopic Approach

Three-Dimensional Trajectory Optimization for Lunar Ascent Using Gauss Pseudospectral Method

The Gravity-assist Trajectory Design with Impulsive

Optimization design of low-thrust transfer trajectory

Homotopy Method for Optimization of Variable-Specific-impulse Low-Thrust Trajectories

Continuous Low Thrust Trajectory Optimization for Preliminary Design

Optimizing low-thrust and gravity assist maneuvers to design interplanetary trajectories

Trajectory Optimization Method of Aero-Gravity Assist Orbital Maneuver

Analytical Gradient-based Optimization Method for Low-thrust Transfer Trajectories

Design and Optimization of Low-Thrust Orbit Transfers Using Hybrid Method

Hybrid Low Thrust Propulsion Trajectory Design and Optimization Using Virtual Gravity Method

Fuel-Optimal Trajectory Optimization for Lunar Soft Landing Via Enhanced Simultaneous Dynamic Optimization Approach

Design and Optimization of Low Thrust Transfer Trajectory for Engineering Constraints

Study of Design and Optimization of Low-Thrust Transfer Trajectory with Planetary Aerogravity Assist

Trajectory Optimization and Analysis for Near Spacecraft’s Unpowered Gliding Phase

Semi-analytical Approach for Computing Near-Optimal Low-Thrust Transfers to Geosynchronous Orbit

Low-Thrust Trajectory Optimization in A Full Ephemeris Model

Resonance Selection and Path Planning for Noncoplanar Transfers via Multiple Gravity Assists