Abstract:With the extensive exploitation of ocean resources, the steels used in ocean engineering have been developed towards the trend of high strength-toughness and thick plates, which consequently causes welding problem and high risk of stress corrosion cracking (SCC). The heat-affected zone (HAZ) of high-strength low-alloy steel undergoes phase transformation during welding thermal cycle and it's generally considered to be most vulnerable to SCC. E690 steel, as a newly-developed high strength steel, is currently the leading kind of steel used in ocean platform for its excellent performance. However, there is few research about its SCC behavior in marine atmosphere, especially in SO2-polluted atmosphere. Therefore, it's of great importance to investigate the SCC behavior and mechanism of simulated HAZ of E690 steel in this environment. However, the HAZ is a narrow zone including various microstructures; thus, the individual performance of different microstructures is inconvenient to study. In this work, various microstructures in HAZ, including coarse grained heat-affected zone (CGHAZ), fine grained heat-affected zone (FGHAZ) and intercritical heat-affected zone (ICHAZ), were simulated by heat treatment according to real HAZ microstructures of E690 steel. A comparative study of SCC behaviors of various HAZ microstructures in simulated SO2-containing marine atmosphere was conducted by using U-bend specimen corrosion test under dry/wet cyclic condition. The results indicated that various HAZ microstructures have high susceptibility to SCC in this environment. The SCC susceptibility of CGHAZ and ICHAZ is very high with a high crack growth rate while that of FGHAZ and parent metal is relatively modest. SCC cracks were initiated after 5 d of cyclic corrosion test for U-bend specimen of various microstructures. The microcracks were initiated from the corrosion pits, which were induced by the galvanic corrosion between martensite-austenite (M-A) constituents and ferritic matrix.

Effect of Cathodic Potential on Stress Corrosion Cracking Behavior of Different Heat-Affected Zone Microstructures of E690 Steel in Artificial Seawater

Hydrogen Permeation and Stress Corrosion Cracking of Heat-Affected Zone of E690 Steel under the Combined Effect of Sulfur Species and Cathodic Protection in Artificial Seawater

Comparative study on the crack growth behaviours of E690 steel and heat-affected zone microstructures under cathodic potential in artificial seawater based on mechano-electrochemical effect at crack tip

Comparative Study of Stress Corrosion Cracking Behaviors of Typical Microstructures of Weld Heat-Affected Zones of E690 High-Strength Low-Alloy Steel in SO2-Containing Marine Environment

Influence of Different Heat-Affected Zone Microstructures on the Stress Corrosion Behavior and Mechanism of High-Strength Low-Alloy Steel in a Sulfurated Marine Atmosphere

Comparative Study of the Scc Behavior of E690 Steel and Simulated Haz Microstructures in A So2-Polluted Marine Atmosphere

A Study on the Stress Corrosion Mechanism of Microstructures in a Heat-Affected Zone of High-Strength Steel Weldment in Artificial Seawater

Electrochemical Corrosion, Hydrogen Permeation and Stress Corrosion Cracking Behavior of E690 Steel in Thiosulfate-Containing Artificial Seawater

Effect of Cathodic Polarization on Stress Corrosion Cracking Susceptibility of 35crmo Steel for Class 12.9 Fasteners in Seawater

Effect of Electrochemical Potential and Chloride Concentration on Stress Corrosion Cracking Behavior of 23co14ni12cr3mo Ultra-High Strength Steel in NaCl Solution

Evaluation of the Stress Corrosion Crack Growth Behaviour of High-Strength Marine Steel Based on Model of Crack Tip Mechano-Electrochemical Effect

Electrochemical Corrosion, Hydrogen Penetration and Stress Corrosion Cracking Behavior of X80 Steel Heat-Affected Zone in Sulfate-Reducing Bacteria-Containing Seawater

The Effect of Crack Tip Environment on Crack Growth Behaviour of a Low Alloy Steel at Cathodic Potentials in Artificial Seawater

Influence of Cathodic Polarization on Stress Corrosion Cracking Susceptibility of 35crmo Steel for High Strength Bolt in Simulated Deep-Sea Environment

Stress Corrosion Cracking of E690 Steel As a Welded Joint in a Simulated Marine Atmosphere Containing Sulphur Dioxide

Effect of Cathodic Protection Potential on Stress Corrosion Susceptibility of X80 Steel

Evaluation of the Impact of Chloride Ion Concentration on Stress Corrosion Cracking in E690 Steel under Low Ph Conditions

Corrosion Evolution and Stress Corrosion Cracking of E690 Steel for Marine Construction in Artificial Seawater under Potentiostatic Anodic Polarization

Effect of Hydrogen Charging on the Stress Corrosion Cracking Behavior of X70 Steel in Simulated Deep Seawater Environment

Effect of Applied Potentials on Stress Corrosion Cracking of X80 Steel in Simulated Nanxiong Soil Solution

Analysis of Stress Corrosion Cracking Growth Rate in the Heat-Affected Zone of 316L Based on the Heterogeneity of the Mechanical Properties