Abstract:Plate heat exchangers are widely used in various industries. This study considers using a novel design of fractal shape fins with a new structure on the performance of multi-stream plate-fin heat exchangers for the first time, which has not been studied by researchers before. The numerical study is done with a 3D finite volume method. The effect of using Oil/MWCNT nanofluid and using various configurations of fractal fins with different attack angles ranging from 30 degrees to 100 degrees with the range of Reynolds number of 10,000–40,000, have been studied in the current research. These changing parameters have a significant impact on the flow field and heat transfer in the heat exchanger. The results of this study show that increasing the angle of attack of fractal fins creates more flow deflection and higher fluid mixing. The rise of the Reynolds number creates stronger vortexes as the flow passes over the fins, thereby it can augment the fluid mixing in the areas which are close to the finned. As the Reynolds number rises, the growth of the thermal boundary layer diminished. It can also be seen that as the fluid impacts the fractal fins at higher angles of attack, the temperature distribution becomes more uniform in the heat exchanger. Increasing the Reynolds number from 10,000 to 40,000 increases the heat transfers up to 63 %. At the constant Reynolds numbers, increasing the fraction of solid nanoparticle volume up to 4 % in the cooling fluid augment the heat transfer rate by 48 % compared to the base fluid. Increasing the fluid velocity results the amplification of longitudinal vortex formation. Therefore, the pressure loss is higher at the increased Reynolds numbers. At the lower Reynolds numbers, the pumping power has a weaker dependency on the nanofluids concentration. Increasing the angle of attack of fractal fins increases the pumping power by 50 % compared with the angle of attack of 30 degrees. Increasing the fractal fin angle of attack compared with 30 degrees increases friction by 45–85 %. Changes in the Colburn factor show that considering all parameters that increase heat transfer, the Colburn factor increases by 23–42 % compared with the base scenario with Re = 10,000 and angle of attack = 30 degrees.

A Parametric Study of Laminar Convective Heat Transfer in Fractal Minichannels with Hexagonal Fins

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Detailed Heat Transfer Measurements of Curved Fin Channels

Investigation of convective heat transfer performance in nanochannels with fractal Cantor structures

Investigation of Fractal Fins towards Heat Transfer Properties in Thermal Storage System

Conjugate Heat Transfer in Fractal Tree-Like Channels Network Heat Sink for High-Speed Motorized Spindle Cooling

Investigation of heat transfer performance and enhancement mechanisms of supercritical carbon dioxide in PCHE with fractal airfoil fins

Numerical analysis on heat transfer and melting characteristics of a solid-liquid phase change process in a rectangular cavity inserted with bifurcated fractal fins

Thermal-hydraulic performance of flat-plate microchannel with fractal tree-like structure and self-affine rough wall

Numerical investigation of turbulent nanofluid flow behavior in a multi-stream plate-fin heat exchanger with a novel design of fractal fins

Partially-covered fractal induced turbulence on fins thermal dissipation

Numerical study and parametric analysis on performance enhancement of a latent heat storage unit with fractal fins

Numerical Study on Heat Transfer Performance of a New-proposed Pin-fin in an Internal Channel

Numerical Investigation of Fluid Flow and Heat Transfer in High-Temperature Wavy Microchannels with Different Shaped Fins Cooled by Liquid Metal

Numerical study of the intensification of single-phase heat transfer in a sandwich-like channel using staggered miniature-pin fins

Experimental and numerical investigation on the heat transfer enhancement for Mini-channel heat sinks with tessellated fins

Effect of fin shapes on flow boiling heat transfer with staggered fin arrays in a heat sink

Comparative studies on heat transfer and flow resistance of nanofluid in microchannels with different sidewall micro-fins

Numerical Study on Heat Transfer Efficiency and Inter-Layer Stress of Microchannel Heat Sinks with Different Geometries

Pore-scale Simulation of Flow in Minichannels with Porous Fins

Study on the flow and heat transfer characteristics of a hybrid nanofluid jet impingement microchannel heat sink with airfoil fins