Abstract:With the increased frequency of accidental and deliberate explosions, evaluating the response of civil infrastructure systems to blast loading has been attracting the interests of the research and regulatory communities. However, with the high cost and complex safety and logistical issues associated with field explosives testing, North American blast-resistant construction standards (e.g. ASCE 59-11 and CSA S850-12) recommend the use of shock tubes to simulate blast loads and evaluate relevant structural response. This study first aims at developing a simplified two-dimensional axisymmetric shock tube model, implemented in ANSYS Fluent, a computational fluid dynamics software, and then validating the model using the classical Sod’s shock tube problem solution, as well as available shock tube experimental test results. Subsequently, the developed model is compared to a more complex three-dimensional model and the results show that there is negligible difference between the two models for axisymmetric shock tube performance simulation; however, the three-dimensional model is necessary to simulate non-axisymmetric shock tubes. Following the model validation, extensive analyses are performed to evaluate the influences of shock tube design parameters (e.g. the driver section pressure and length and the expansion section length) on blast wave characteristics to facilitate a shock tube design that would generate shock waves similar to those experienced by civil infrastructure components under blast loads. The results show that the peak reflected pressure increases as the driver pressure increases, while a decrease in the expansion length increases the peak reflected pressure. In addition, the positive phase duration increases as both the driver length and expansion length are increased. Finally, the developed two-dimensional axisymmetric model is used to optimize the dimensions of a physical large-scale conical shock tube system constructed for civil infrastructure component blast response evaluation applications. The capabilities of such shock tube system are further investigated by correlating its design parameters to a range of explosion threats identified by different hemispherical TNT charge weight and distance scenarios.

A Novel Approach to Distinguish the Uniform and Non-Uniform Distribution of Blast Loads in Process Industry

Probability Distribution and Determination of Blast Loading During Structural Blast Resistant Study

Research of Loading Effects of Blast in Air

Dynamic Response and Vibration Modes of Multi-Layer Wound Cylindrical Shell for Hydrogen Storage under External Blast Loading

Anisotropic Dynamic Damage and Fragmentation of Rock Materials under Explosive Loading

Evaluation of Blast Wave from Hydrogen Pipeline Burst by a Coupled Fluid-Structure-rupture Approach

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Numerical Simulation of Blast Loads and Dynamic Response of Reinforced Concrete Slab Subjected to Close-in Explosion

Study on load distributing function of square slab surface under the action of underwater close‐in blast loading

Study on the characteristics of blast loads due to two simultaneous detonated charges in real air

Non-parametric characterization of blast loads

Dynamic Response and Blast-Resistance Analysis of a Tunnel Subjected to Blast Loading

Finite Element Simulation of Medium-Range Blast Loading Using LS-DYNA

Dynamic Response and Damage Assessment of Partially Confined Metallic Cylinders Under Transverse Blast Loading

Influence of Explosive Shape on the Response of Steel Plates under Blast Loading

3D FINITE ELEMENT ANALYSIS OF ANISOTROPIC BRITTLE DYNAMIC DAMAGE IN GRAVITY DAM UNDER BLAST-IMPACT LOAD

Numerical investigation of blast-induced rock fragmentation

Comparative Study for Evaluation of Blast Load Parameters using IS 4991-1968 and UFC 3-340-02

Deriving formulas of loading distribution on underground arch structure surface under close-in explosion

Blast load simulation using conical shock tube systems

Numerical analysis of axial load effects on RC bridge columns under blast loading