Abstract:Two-dimensional (2D) transition metal dichalcogenides (TMDs), such as MoS2 and WS2 have been widely studied due to their unique physical and electronic properties even at one atomic layer thickness. Since the first report on the MoS2 field-effect transistor (FET) device [1], great efforts have been made in the past decade to extend the intriguing features of TMDs to practical applications. However, such integration has been severely bottlenecked by the lack of effective approaches to achieve wafer-scale, uniform, crystalline and stoichiometric TMD films. Till now, it is still prevalent to fabricate TMD-based electronic devices using mechanical exfoliation methods. Although single-crystal flakes with least defects can be obtained, the size, thickness and location of the exfoliated TMD flakes are largely uncontrollable, making it unsuitable for large-scale device integration and massive production. So far, various synthetic approaches have been proposed to grow large-area TMD thin films. Chemical vapor deposition (CVD)-based method is one of the major routines to synthesize high-quality monolayer and few-layer TMD flakes [2-4]. For example, in typical CVD processes to grow MoS2, the films can be achieved either by the reduction reaction between the S and MoO3 source powders or by sulfurizing the Mo (or MoOx) films pre-deposited by using physical vapor deposition. However, the nucleation sites in the CVD process are uncontrollable which may lead to the vertical stacking of the MoS2 flakes in triangle shape deteriorating the crystalline properties of the film. On the other hand, the pre-deposited Mo or MoOx film by using e-beam evaporation or sputtering usually suffer from rough surface morphology and unsatisfactory film uniformity which further limit the homogeneity of the large-scale film and device integration. Atomic layer deposition (ALD) is a surface-controlled film fabrication and can provide a possible route towards the synthesis of TMD thin films since the ALD approach follows the layer-by-layer deposition mechanism [5,6]. As compared to the conventional CVD method, ALD can enable precise thickness control on atomic scale and excellent film uniformity as well as good stoichiometry and crystallinity with proper annealing steps. In this work, we employed the ALD-based synthesis method to grow wafer-scale MoS2 and WS2 thin films. Non-toxic MoCl5, WCl5 and hexamethyldisilathiane (HMDST) precursors have been used which are different and superior to those used in previous work. Film characterizations have confirmed the wafer-level uniformity, crystallinity and stoichiometry of the synthesized films. Homogeneous electrical behaviors have also been obtained from the fabricated FET device arrays. In addition, optoelectronic devices such as photodetectors and simple logic gates such as n-type inverter arrays have been demonstrated using the wafer-scale MoS2 FET arrays. Furthermore, we have used the substitutional doping in the ALD process to achieve controllable p-type doping of MoS2 films, which can provide solid basis for the complimentary metal-oxide-semiconductor (CMOS) integrated circuit applications. This work shows that the ALD-based synthesis of the 2D TMD thin films is an attractive approach and has provided a promising platform to further push forward the circuit and system level applications of the TMD materials. References [1] B. Radisavljevic, et al., Nature Nanotechnol. 6, 147 (2011). [2] Y. H. Lee, et al., Adv. Mater. 24 2320 (2012). [3] X. S. Wang, et al., J. Am. Chem. Soc. 135, 5304 (2013). [4] Y. J. Zhan, et al., Small 8, 966 (2012). [5] S. M. George, Chem. Rev. 110, 111 (2010). [6] G. N. Parsons, et al., J. Vac. Sci. Technol. A 31, 11 (2013).

Chemical Vapor Deposition Synthesis of Two-Dimensional Freestanding Transition Metal Oxychloride for Electronic Applications

Space-confined CVD growth of 2D-MoS<sub>2</sub> crystals with tunable dimensionality <i>via</i> adjusting growth conditions

Scalable salt-templated synthesis of two-dimensional transition metal oxides

Growth and Raman Scattering Investigation of a New 2D MOX Material: YbOCl

Research Progress on the Preparations, Characterizations and Applications of Large Scale 2D Transition Metal Dichalcogenides Films

Lithium Ion Intercalation-Induced Metal-Insulator Transition in Inclined-Standing Grown 2D Non-Layered Cr2S3 Nanosheets

Fabrication and Optical Performance of Mo1-xWxS2 Monolayer with Different Composition Ranges Via One-Step Chemical Vapor Deposition Approach

Conversion of Non-Van Der Waals Solids to 2D Transition-Metal Chalcogenides.

Chemical Vapor Deposition and Raman Spectroscopy of Two-Dimensional Antiferromagnetic FeOCl Crystals

Wafer-Scalable Single-Layer Amorphous Molybdenum Trioxide

In Situ-Generated Volatile Precursor for CVD Growth of a Semimetallic 2D Dichalcogenide.

Self-condensation-assisted chemical vapour deposition growth of atomically two-dimensional MOF single-crystals

In situ strain induced phase transition and defects engineering in CVD synthesized atomically thin MoS2

ALD-Based Synthesis of Wafer-Scale Transition Metal Dichalcogenides Towards Nanoelectronics and Optoelectronics Applications

Recent Advances in Spin-coating Precursor Mediated Chemical Vapor Deposition of Two-Dimensional Transition Metal Dichalcogenides

Sodium chloride-assisted CVD enables controlled synthesis of large single-layered MoS2

Direct CVD-growth and optoelectronic characterizations of monolayer ribbon-like MoS 2 flakes

2D FeOCl: A Highly In‐Plane Anisotropic Antiferromagnetic Semiconductor Synthesized via Temperature‐Oscillation Chemical Vapor Transport

Chemical Vapor Deposition Synthesized Atomically Thin Molybdenum Disulfide with Optoelectronic-Grade Crystalline Quality

Electronic properties of polymorphic two-dimensional layered chromium disulphide

Phase-Controllable Chemical Vapor Deposition Synthesis of Atomically Thin MoTe2