Abstract:Direct tip position regulation of flexible manipulators is one of the most challenging control tasks. There are mainly three problems to be addressed in order to achieve good performance. The first two control problems arise owing to the unstable zeros and complex poles in the system nominal part which is dominated by a transfer function. The third problem is the existence of unstructured uncertainties owing to the truncation of high-order resonance modes and system nonlinearities. Because of the above difficulties and in particular the non-minimum-phase nature, tip regulation task of flexible manipulators is usually solved indirectly: direct control of joint angle and suppression of the flexible link vibration. The aim of this study is to investigate the direct approach for tip regulation. Since the tip transfer function contains unstable zeros and the first few dominant flexible modes (complex poles), a reference model of the same order is selected which does not have any finite zero but all negative real poles. In order to force the system to follow the reference model in the presence of the unstructured uncertainties, a variable structure controller is adopted in which the switching surface is derived from the reference model. When in sliding mode, the system performs as the reference model. Hence there will be no vibration and the tip position regulation can be achieved when the system approaches steady state. To improve the system responses further, an adaptation law with dead-zone scheme is combined with the variable structure controller. Simulation results show that link vibrations have been eliminated and the control profile is fairly smooth.

Three-dimensional Modeling and Input Saturation Control for a Two-Link Flexible Manipulator Based on Infinite Dimensional Model.

Partial differential equation modeling and vibration control for a nonlinear 3D rigid‐flexible manipulator system with actuator faults

Model-Free Control of Flexible Manipulator Based on Intrinsic Design

Design And Modeling Of A Hydraulic Soft Actuator With Three Degrees Of Freedom

Dynamic modeling and sensor-based stable control for two-link flexible manipulators

Adaptive Neural-Network Controller for an Uncertain Rigid Manipulator With Input Saturation and Full-Order State Constraint

Modeling and control of a two-link flexible space manipulator using the wave-based method

Dynamic Model of a 3-DOF Redundantly Actuated Parallel Manipulator

Adaptive RISE control of a multi-link flexible manipulator based on integral manifold approach

Adaptive boundary iterative learning vibration control using disturbance observers for a rigid–flexible manipulator system with distributed disturbances and input constraints

Adaptive Neural Impedance Control of a Robotic Manipulator With Input Saturation

Kinematic-Free Position Control for A Deformable Manipulator

Kinematic and Dynamic Analysis of a New Cylindrical 3-DOF Parallel Manipulator

Stiffness Modeling Approach for a 3-DOF Parallel Manipulator with Consideration of Nonlinear Joint Stiffness

On Singular Perturbation Based Inverse Dynamics Control for a Two-Link Flexible Manipulator

Direct Tip Regulation of a Single-Link Flexible Manipulator by Adaptive Variable Structure Control

Modeling and Verification for a Three-Degree-of-Freedom Flexure-Based Planar Parallel Micro Manipulator

Three-dimensional dynamic modeling and analysis of flexible robot with coupling deformation based on spinor theory

Data-based Fuzzy Adaptive Control for a Flexible-Link Manipulator

The Robust Adaptive Control of Free-Floating Space Manipulator Systems

Optimal design, modeling and control of a long stroke 3-PRR compliant parallel manipulator with variable thickness flexure pivots