Abstract:A novel modeling paradigm, named as SED-SL-RBF, enhances the structural ensemble dynamics-stress length (SED-SL) model of wall-bounded turbulence using limited aerodynamic data from NACA airfoils. It constructs a multi-layer structure (MLS) of the turbulent boundary layer (BL) over the airfoils and uses machine learning to reconstruct model parameters from experimental data. This approach has been applied to turbulent flows over nine distinct NACA airfoil types, with a broad spectrum of Reynolds numbers and angles of attack. The model parameters, l ∞ 0 and y ∞ buf , are reconstructed using a radial basis function (RBF) neural network and applied to an SED-SL computational fluid dynamics (CFD) solver. This results in improved predictions of lift and drag coefficients for geometries and flow conditions previously calculated using the Menter shear stress transport (SST) turbulence model. The accuracy of the predictive lift coefficient C L exceeded 95%, while the error in the predictive drag coefficient C D was less than 6 counts. The neural network-augmented SED-SL model also demonstrated exceptional predictive accuracy for the pressure field. The MLS parameters for NACA 2421 exhibit similarities with angle of attack (AOA), which can be treated as functions of the Reynolds number. These findings suggested that the MLS parameters for NACA 2421 are independent of the AOA prior to stall. This similarity behavior provides a promising approach to model airfoil flows under various physical conditions. The broader vision is to integrate data to reveal innate model discrepancies in terms of model parameters, thereby extending the applicability of the SED-SL-RBF model to a wider range of flow scenarios.

Precise Drag Prediction of Airfoil Flows by a New Algebraic Model

Constrained Large-Eddy Simulation and Detached Eddy Simulation of Flow Past a Commercial Aircraft at 14 Degrees Angle of Attack

Neural network-augmented SED-SL modeling of turbulent flows over airfoils

Numerical and Experimental Research of Flow Control on an NACA 0012 Airfoil by Local Vibration

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

The Influence of Advection Schemes and Turbulence Closure Models on Drag Coefficient Calculation Around a Circular Cylinder at High Reynolds Number

Numerical Analysis of Lift Enhancement and Drag Reduction by Self-Induced Vibration of Localized Elastic Airfoil

Aerodynamic Prediction of High-Lift Configuration Using K−v2¯−ω Turbulence Model

Knowledge discovery with computational fluid dynamics: Supercritical airfoil database and drag divergence prediction

Prediction of Airfoil Stall Based on a Modified K−v2¯−ω Turbulence Model

Uncertainty Involved Drag Divergence Characteristic Predicting Method Based on VAE

Analysis of Turbulent Separated Flows for the NREL Airfoil Using Anisotropic Two-Equation Models at Higher Angles of Attack

Aerodynamic Prediction of the High-Lift Common Research Model with Modified Turbulence Model

Aerodynamic Prediction of a CRM High-lift Configuration using a modified three equation turbulence mode

Prediction of drag components on rough surfaces using effective models

Comparative Study of Different Turbulence Models for Cavitational Flows Around NACA0012 Hydrofoil

A Generalized Model for Predicting the Drag Coefficient of Arbitrary Bluff Shaped Bodies at High Reynolds Numbers

Prediction of Separation Induced Transition on Thick Airfoil Using Nonlinear URANS Based Turbulence Model

A Method for Evaluation of Aerodynamic Lift and Drag Based on Statistical Mechanics

A Scale-Adaptive Turbulence Model Based on the k-Equation and Recalibrated Reynolds Stress Constitutive Relation

Transferable Machine Learning Model for the Aerodynamic Prediction of Swept Wings