Abstract:Antimony (Sb) is a potentially carcinogenic metalloid and is listed as a high priority pollutant by the World Health Organization. We used FeCl3-modified attapulgite (ATP) incorporating sodium alginate (SA) to synthesize an Fe-ATP bead for Sb(III) removal from the aquatic environment. The parameters of the adsorption process, including pH, temperature, and initial contaminant loading, were systematically optimized. The results indicated that the optimum solution pH range was 1.0-11.0, and the adsorption capacity was up to 39.24 mg g(-1). The value of Delta H degrees (2.973 kJ mol(-1)) and Delta G degrees (-2.6668 kJ mol-1 (303.15 K), -2.8558 kJ mol(-1) (313.15 K), -3.0364 kJ mol(-1) (323.15 K)) showed that the Sb(III) adsorption onto Fe-ATP beads was a spontaneous endothermic process and the adsorption efficiency increases with temperature. The adsorption generally reached equilibrium after 20 min. The Sb(III) adsorption efficiency onto Fe-ATP beads remained greater than 80% after 5 regeneration cycles. In view of the broad applicable pH and high adsorption capacity, Fe-ATP bead is a potential adsorbent for Sb(III) recovered from polluted water.

Removal of Antimonite (III) from Wastewater Using Sodium-Alginate-modified Fe-attapulgite with Sodium Alginate Beads