Abstract:The positioning accuracy of the footprint of a satellite laser altimeter is primarily dependent on the accuracy of its laser pointing, e.g., a 30 arcsec pointing bias will induce 87 m horizontal error and 1.5 m vertical error when the altitude is 600 km and the laser incident angle is 1?. In order to achieve the three-dimensional high-precision observation on the Earth surface, on-orbit calibration is needed to remove the systematic pointing bias mainly arising from the thermal effect. The current methods of on-orbit calibration and verification for laser altimeters are the attitude maneuvering and the footprint detection, respectively. However, the attitude maneuvering is not applicable to the existing satellite platform of China, which uses the large platform with a three-axis attitude stabilization system. The current footprint detection method can only achieve on-orbit verification task, i.e., the horizontal and vertical errors can be evaluated by analyzing the captured laser footprints but the systematic pointing bias cannot be estimated and removed. An improved design scenario of energy detector that is used for capturing laser footprint is given in this paper. The quantification level of the captured laser energy is equal to 8, which is bigger than that of the energy detector designed for geoscience laser altimeter systems corresponding to level 2. Benefiting from the new design scenario, fewer detectors are needed to achieve the same precision when calculating the centroid geolocations of captured footprints. A new systematic misalignment estimation model in the laser direction cosines is deduced, and it is used to estimate the systematic bias by using the detected footprints based on the Gauss-Markoff criterion. With the new detectors and bias estimation model, the footprint detection method now can achieve on-orbit calibration, as well as on-orbit verification. According to the presented calculation model, simulation experiments are operated to analyse three effects that may influence the performance of the footprint detection on-orbit calibration, i.e., the laser incident angle on the detector array, the surface roughness of the site where detectors lay out, and the grid density of the detector array. The simulation results indicate that, when the horizontal positioning accuracy of the captured footprint centroid demands better than 1.8 m which corresponds to 0.6 arcsec laser pointing accuracy when the altitude of the satellite is 600 km, the grid distance of the detector array can be 20 m, the laser incident angle on the detector array should be larger than 3?, and the surface roughness of the calibration site should be less than 0.1 m. The designed detectors and calibration method will be used to capture laser footprints and remove the systematic bias for the laser altimeter on China GF-7 satellite, which is one of the upcoming high-resolution satellites for Earth observation.

Design and Analysis of Radiometric Calibration Mission in-orbit for Environment and Disasters Monitoring Satellite

On-Orbit Calibration of Satellite Laser Altimeters Based on Footprint Detection

Design of Infrared Static Focal Plane Earth Sensor for Micro-Satellite

On-orbit calibration technique for residual magnetism fluctuation of micro-satellite

In-orbit lunar imaging and analysis for optical remote sensing satellite

On-Orbit Radiometric Calibration of Hyperspectral Sensors on Board Micro-Nano Satellite Constellation Based on RadCalNet Data

A General On-Orbit Absolute Radiometric Calibration Method Compatible with Multiple Imaging Conditions

On-orbit calibration of domestic APS star tracker

On-orbit calibration based upon star observation to correct thermal deformation of geostationary optical satellites

On-Orbit High-Accuracy Geometric Calibration for Remote Sensing Camera Based on Star Sources Observation

On-Orbit Calibration of Installation Parameter of Multiple Star Sensors System for Optical Remote Sensing Satellite with Ground Control Points

The Operational Inflight Radiometric Uniform Calibration of a Directional Polarimetric Camera

Evaluation on Radiometric Capability of Chinese Optical Satellite Sensors

On-Orbit Geometric Calibration and Accuracy Validation of the Jilin1-KF01B Wide-Field Camera

A Relative Radiometric Calibration Method Based on the Histogram of Side-Slither Data for High-Resolution Optical Satellite Imagery

Evaluation of the Radiometric Calibration of ZY1-02E Thermal Infrared Data

On-Orbit Absolute Radiometric Calibration and Validation of ZY3-02 Satellite Multispectral Sensor

An Automatic Radiometric Cross-Calibration Method for Wide-Angle Medium-Resolution Multispectral Satellite Sensor Using Landsat Data

On-Orbit Radiometric Calibration for a Space-Borne Multi-Camera Mosaic Imaging Sensor

Methods of Analyzing the Error and Rectifying the Calibration of a Solar Tracking System for High-Precision Solar Tracking in Orbit

Concept of a Satellite Cross-Calibration Radiometer for In-Orbit Calibration of Commercial Optical Satellites